net: freescale: fec: add support for optional enet_out clk

Some MX28 boards need the internal enet_out clock to be enabled. So, do
this in the driver iff the clock was referenced via devicetree.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/freescale/fec.c

@@ -1802,6 +1802,11 @@ fec_probe(struct platform_device *pdev)
 		goto failed_clk;
 	}
 
+	/* enet_out is optional, depends on board */
+	fep->clk_enet_out = devm_clk_get(&pdev->dev, "enet_out");
+	if (IS_ERR(fep->clk_enet_out))
+		fep->clk_enet_out = NULL;
+
 	fep->clk_ptp = devm_clk_get(&pdev->dev, "ptp");
 	fep->bufdesc_ex =
 		pdev->id_entry->driver_data & FEC_QUIRK_HAS_BUFDESC_EX;
@@ -1812,6 +1817,7 @@ fec_probe(struct platform_device *pdev)
 
 	clk_prepare_enable(fep->clk_ahb);
 	clk_prepare_enable(fep->clk_ipg);
+	clk_prepare_enable(fep->clk_enet_out);
 	clk_prepare_enable(fep->clk_ptp);
 
 	reg_phy = devm_regulator_get(&pdev->dev, "phy");
@@ -1877,6 +1883,7 @@ fec_probe(struct platform_device *pdev)
 failed_regulator:
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
+	clk_disable_unprepare(fep->clk_enet_out);
 	clk_disable_unprepare(fep->clk_ptp);
 failed_pin:
 failed_clk:
@@ -1903,6 +1910,7 @@ fec_drv_remove(struct platform_device *pdev)
 	clk_disable_unprepare(fep->clk_ptp);
 	if (fep->ptp_clock)
 		ptp_clock_unregister(fep->ptp_clock);
+	clk_disable_unprepare(fep->clk_enet_out);
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 	for (i = 0; i < FEC_IRQ_NUM; i++) {
@@ -1933,6 +1941,7 @@ fec_suspend(struct device *dev)
 		fec_stop(ndev);
 		netif_device_detach(ndev);
 	}
+	clk_disable_unprepare(fep->clk_enet_out);
 	clk_disable_unprepare(fep->clk_ahb);
 	clk_disable_unprepare(fep->clk_ipg);
 
@@ -1945,6 +1954,7 @@ fec_resume(struct device *dev)
 	struct net_device *ndev = dev_get_drvdata(dev);
 	struct fec_enet_private *fep = netdev_priv(ndev);
 
+	clk_prepare_enable(fep->clk_enet_out);
 	clk_prepare_enable(fep->clk_ahb);
 	clk_prepare_enable(fep->clk_ipg);
 	if (netif_running(ndev)) {

drivers/net/ethernet/freescale/fec.h

@@ -207,6 +207,7 @@ struct fec_enet_private {
 
 	struct clk *clk_ipg;
 	struct clk *clk_ahb;
+	struct clk *clk_enet_out;
 	struct clk *clk_ptp;
 
 	/* The saved address of a sent-in-place packet/buffer, for skfree(). */