---

yaml --- r: 254219 b: refs/heads/master c: e336f61 h: refs/heads/master i: 254217: da82dda 254215: 59c8fff v: v3
git-mirror · Jun 30, 2011 · daeaf98 · daeaf98
1 parent d80a473
commit daeaf98
Show file tree

Hide file tree

Showing 89 changed files with 341 additions and 1,006 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3b775e2246ae861daec276d3229a7de2af69b7db
+refs/heads/master: e336f61fe238ade68eca7850d64fd6c194bdc998
diff --git a/trunk/Documentation/usb/error-codes.txt b/trunk/Documentation/usb/error-codes.txt
@@ -76,13 +76,6 @@ A transfer's actual_length may be positive even when an error has been
 reported.  That's because transfers often involve several packets, so that
 one or more packets could finish before an error stops further endpoint I/O.
 
-For isochronous URBs, the urb status value is non-zero only if the URB is
-unlinked, the device is removed, the host controller is disabled, or the total
-transferred length is less than the requested length and the URB_SHORT_NOT_OK
-flag is set.  Completion handlers for isochronous URBs should only see
-urb->status set to zero, -ENOENT, -ECONNRESET, -ESHUTDOWN, or -EREMOTEIO.
-Individual frame descriptor status fields may report more status codes.
-
 
 0			Transfer completed successfully
 
@@ -139,7 +132,7 @@ Individual frame descriptor status fields may report more status codes.
 			device removal events immediately.
 
 -EXDEV			ISO transfer only partially completed
-			(only set in iso_frame_desc[n].status, not urb->status)
+			look at individual frame status for details
 
 -EINVAL			ISO madness, if this happens: Log off and go home
 

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1345,16 +1345,18 @@ F:	drivers/auxdisplay/
 F:	include/linux/cfag12864b.h
 
 AVR32 ARCHITECTURE
-M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
+M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
 W:	http://www.atmel.com/products/AVR32/
 W:	http://avr32linux.org/
 W:	http://avrfreaks.net/
-S:	Supported
+S:	Maintained
 F:	arch/avr32/
 
 AVR32/AT32AP MACHINE SUPPORT
-M:	Hans-Christian Egtvedt <hans-christian.egtvedt@atmel.com>
-S:	Supported
+M:	Haavard Skinnemoen <hskinnemoen@gmail.com>
+M:	Hans-Christian Egtvedt <egtvedt@samfundet.no>
+S:	Maintained
 F:	arch/avr32/mach-at32ap/
 
 AX.25 NETWORK LAYER
@@ -6434,9 +6436,8 @@ S:	Maintained
 F:	drivers/usb/misc/rio500*
 
 USB EHCI DRIVER
-M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	Documentation/usb/ehci.txt
 F:	drivers/usb/host/ehci*
 
@@ -6466,12 +6467,6 @@ S:	Maintained
 F:	Documentation/hid/hiddev.txt
 F:	drivers/hid/usbhid/
 
-USB/IP DRIVERS
-M:	Matt Mooney <mfm@muteddisk.com>
-L:	linux-usb@vger.kernel.org
-S:	Maintained
-F:	drivers/staging/usbip/
-
 USB ISP116X DRIVER
 M:	Olav Kongas <ok@artecdesign.ee>
 L:	linux-usb@vger.kernel.org
@@ -6501,9 +6496,8 @@ S:	Maintained
 F:	sound/usb/midi.*
 
 USB OHCI DRIVER
-M:	Alan Stern <stern@rowland.harvard.edu>
 L:	linux-usb@vger.kernel.org
-S:	Maintained
+S:	Orphan
 F:	Documentation/usb/ohci.txt
 F:	drivers/usb/host/ohci*
 

diff --git a/trunk/arch/arm/mach-exynos4/init.c b/trunk/arch/arm/mach-exynos4/init.c
@@ -35,7 +35,6 @@ void __init exynos4_common_init_uarts(struct s3c2410_uartcfg *cfg, int no)
 			tcfg->clocks = exynos4_serial_clocks;
 			tcfg->clocks_size = ARRAY_SIZE(exynos4_serial_clocks);
 		}
-		tcfg->flags |= NO_NEED_CHECK_CLKSRC;
 	}
 
 	s3c24xx_init_uartdevs("s5pv210-uart", s5p_uart_resources, cfg, no);

diff --git a/trunk/arch/arm/mach-shmobile/board-ag5evm.c b/trunk/arch/arm/mach-shmobile/board-ag5evm.c
@@ -381,7 +381,7 @@ void ag5evm_sdhi1_set_pwr(struct platform_device *pdev, int state)
 	gpio_set_value(GPIO_PORT114, state);
 }
 
-static struct sh_mobile_sdhi_info sh_sdhi1_info = {
+static struct sh_mobile_sdhi_info sh_sdhi1_platdata = {
 	.tmio_flags	= TMIO_MMC_WRPROTECT_DISABLE,
 	.tmio_caps	= MMC_CAP_NONREMOVABLE | MMC_CAP_SDIO_IRQ,
 	.tmio_ocr_mask	= MMC_VDD_32_33 | MMC_VDD_33_34,
@@ -413,7 +413,7 @@ static struct platform_device sdhi1_device = {
 	.name		= "sh_mobile_sdhi",
 	.id		= 1,
 	.dev		= {
-		.platform_data	= &sh_sdhi1_info,
+		.platform_data	= &sh_sdhi1_platdata,
 	},
 	.num_resources	= ARRAY_SIZE(sdhi1_resources),
 	.resource	= sdhi1_resources,

diff --git a/trunk/arch/arm/mach-shmobile/board-ap4evb.c b/trunk/arch/arm/mach-shmobile/board-ap4evb.c
@@ -913,7 +913,7 @@ static struct i2c_board_info imx074_info = {
 	I2C_BOARD_INFO("imx074", 0x1a),
 };
 
-static struct soc_camera_link imx074_link = {
+struct soc_camera_link imx074_link = {
 	.bus_id		= 0,
 	.board_info	= &imx074_info,
 	.i2c_adapter_id	= 0,

diff --git a/trunk/arch/arm/mach-shmobile/board-mackerel.c b/trunk/arch/arm/mach-shmobile/board-mackerel.c
@@ -1287,9 +1287,9 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
+	&usbhs0_device,
 	&usb1_host_device,
 	&usbhs1_device,
-	&usbhs0_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,

diff --git a/trunk/arch/arm/mach-ux500/board-mop500-pins.c b/trunk/arch/arm/mach-ux500/board-mop500-pins.c
@@ -110,18 +110,10 @@ static pin_cfg_t mop500_pins_common[] = {
 	GPIO168_KP_O0,
 
 	/* UART */
-	/* uart-0 pins gpio configuration should be
-	 * kept intact to prevent glitch in tx line
-	 * when tty dev is opened. Later these pins
-	 * are configured to uart mop500_pins_uart0
-	 *
-	 * It will be replaced with uart configuration
-	 * once the issue is solved.
-	 */
-	GPIO0_GPIO	| PIN_INPUT_PULLUP,
-	GPIO1_GPIO	| PIN_OUTPUT_HIGH,
-	GPIO2_GPIO	| PIN_INPUT_PULLUP,
-	GPIO3_GPIO	| PIN_OUTPUT_HIGH,
+	GPIO0_U0_CTSn	| PIN_INPUT_PULLUP,
+	GPIO1_U0_RTSn	| PIN_OUTPUT_HIGH,
+	GPIO2_U0_RXD	| PIN_INPUT_PULLUP,
+	GPIO3_U0_TXD	| PIN_OUTPUT_HIGH,
 
 	GPIO29_U2_RXD	| PIN_INPUT_PULLUP,
 	GPIO30_U2_TXD	| PIN_OUTPUT_HIGH,

diff --git a/trunk/arch/arm/mach-ux500/board-mop500.c b/trunk/arch/arm/mach-ux500/board-mop500.c
@@ -27,21 +27,18 @@
 #include <linux/leds-lp5521.h>
 #include <linux/input.h>
 #include <linux/gpio_keys.h>
-#include <linux/delay.h>
 
 #include <asm/mach-types.h>
 #include <asm/mach/arch.h>
 
 #include <plat/i2c.h>
 #include <plat/ste_dma40.h>
-#include <plat/pincfg.h>
 
 #include <mach/hardware.h>
 #include <mach/setup.h>
 #include <mach/devices.h>
 #include <mach/irqs.h>
 
-#include "pins-db8500.h"
 #include "ste-dma40-db8500.h"
 #include "devices-db8500.h"
 #include "board-mop500.h"
@@ -396,63 +393,12 @@ static struct stedma40_chan_cfg uart2_dma_cfg_tx = {
 };
 #endif
 
-
-static pin_cfg_t mop500_pins_uart0[] = {
-	GPIO0_U0_CTSn   | PIN_INPUT_PULLUP,
-	GPIO1_U0_RTSn   | PIN_OUTPUT_HIGH,
-	GPIO2_U0_RXD    | PIN_INPUT_PULLUP,
-	GPIO3_U0_TXD    | PIN_OUTPUT_HIGH,
-};
-
-#define PRCC_K_SOFTRST_SET      0x18
-#define PRCC_K_SOFTRST_CLEAR    0x1C
-static void ux500_uart0_reset(void)
-{
-	void __iomem *prcc_rst_set, *prcc_rst_clr;
-
-	prcc_rst_set = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_SET);
-	prcc_rst_clr = (void __iomem *)IO_ADDRESS(U8500_CLKRST1_BASE +
-			PRCC_K_SOFTRST_CLEAR);
-
-	/* Activate soft reset PRCC_K_SOFTRST_CLEAR */
-	writel((readl(prcc_rst_clr) | 0x1), prcc_rst_clr);
-	udelay(1);
-
-	/* Release soft reset PRCC_K_SOFTRST_SET */
-	writel((readl(prcc_rst_set) | 0x1), prcc_rst_set);
-	udelay(1);
-}
-
-static void ux500_uart0_init(void)
-{
-	int ret;
-
-	ret = nmk_config_pins(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_enable failed\n");
-}
-
-static void ux500_uart0_exit(void)
-{
-	int ret;
-
-	ret = nmk_config_pins_sleep(mop500_pins_uart0,
-			ARRAY_SIZE(mop500_pins_uart0));
-	if (ret < 0)
-		pr_err("pl011: uart pins_disable failed\n");
-}
-
 static struct amba_pl011_data uart0_plat = {
 #ifdef CONFIG_STE_DMA40
 	.dma_filter = stedma40_filter,
 	.dma_rx_param = &uart0_dma_cfg_rx,
 	.dma_tx_param = &uart0_dma_cfg_tx,
 #endif
-	.init = ux500_uart0_init,
-	.exit = ux500_uart0_exit,
-	.reset = ux500_uart0_reset,
 };
 
 static struct amba_pl011_data uart1_plat = {

diff --git a/trunk/arch/arm/plat-samsung/include/plat/regs-serial.h b/trunk/arch/arm/plat-samsung/include/plat/regs-serial.h
@@ -224,8 +224,6 @@
 #define S5PV210_UFSTAT_RXMASK	(255<<0)
 #define S5PV210_UFSTAT_RXSHIFT	(0)
 
-#define NO_NEED_CHECK_CLKSRC	1
-
 #ifndef __ASSEMBLY__
 
 /* struct s3c24xx_uart_clksrc

diff --git a/trunk/arch/powerpc/boot/dts/p1022ds.dts b/trunk/arch/powerpc/boot/dts/p1022ds.dts
@@ -209,10 +209,8 @@
 			wm8776:codec@1a {
 				compatible = "wlf,wm8776";
 				reg = <0x1a>;
-				/*
-				 * clock-frequency will be set by U-Boot if
-				 * the clock is enabled.
-				 */
+				/* MCLK source is a stand-alone oscillator */
+				clock-frequency = <12288000>;
 			};
 		};
 
@@ -282,8 +280,7 @@
 			codec-handle = <&wm8776>;
 			fsl,playback-dma = <&dma00>;
 			fsl,capture-dma = <&dma01>;
-			fsl,fifo-depth = <15>;
-			fsl,ssi-asynchronous;
+			fsl,fifo-depth = <16>;
 		};
 
 		dma@c300 {

diff --git a/trunk/arch/powerpc/configs/pseries_defconfig b/trunk/arch/powerpc/configs/pseries_defconfig
@@ -148,6 +148,7 @@ CONFIG_SCSI_SAS_ATTRS=m
 CONFIG_SCSI_CXGB3_ISCSI=m
 CONFIG_SCSI_CXGB4_ISCSI=m
 CONFIG_SCSI_BNX2_ISCSI=m
+CONFIG_SCSI_BNX2_ISCSI=m
 CONFIG_BE2ISCSI=m
 CONFIG_SCSI_IBMVSCSI=y
 CONFIG_SCSI_IBMVFC=m

diff --git a/trunk/arch/powerpc/kernel/rtas-rtc.c b/trunk/arch/powerpc/kernel/rtas-rtc.c
@@ -4,7 +4,6 @@
 #include <linux/init.h>
 #include <linux/rtc.h>
 #include <linux/delay.h>
-#include <linux/ratelimit.h>
 #include <asm/prom.h>
 #include <asm/rtas.h>
 #include <asm/time.h>
@@ -30,10 +29,9 @@ unsigned long __init rtas_get_boot_time(void)
 		}
 	} while (wait_time && (get_tb() < max_wait_tb));
 
-	if (error != 0) {
-		printk_ratelimited(KERN_WARNING
-				   "error: reading the clock failed (%d)\n",
-				   error);
+	if (error != 0 && printk_ratelimit()) {
+		printk(KERN_WARNING "error: reading the clock failed (%d)\n",
+			error);
 		return 0;
 	}
 
@@ -57,21 +55,19 @@ void rtas_get_rtc_time(struct rtc_time *rtc_tm)
 
 		wait_time = rtas_busy_delay_time(error);
 		if (wait_time) {
-			if (in_interrupt()) {
+			if (in_interrupt() && printk_ratelimit()) {
 				memset(rtc_tm, 0, sizeof(struct rtc_time));
-				printk_ratelimited(KERN_WARNING
-						   "error: reading clock "
-						   "would delay interrupt\n");
+				printk(KERN_WARNING "error: reading clock"
+				       " would delay interrupt\n");
 				return;	/* delay not allowed */
 			}
 			msleep(wait_time);
 		}
 	} while (wait_time && (get_tb() < max_wait_tb));
 
-	if (error != 0) {
-		printk_ratelimited(KERN_WARNING
-				   "error: reading the clock failed (%d)\n",
-				   error);
+        if (error != 0 && printk_ratelimit()) {
+                printk(KERN_WARNING "error: reading the clock failed (%d)\n",
+		       error);
 		return;
         }
 
@@ -103,10 +99,9 @@ int rtas_set_rtc_time(struct rtc_time *tm)
 		}
 	} while (wait_time && (get_tb() < max_wait_tb));
 
-	if (error != 0)
-		printk_ratelimited(KERN_WARNING
-				   "error: setting the clock failed (%d)\n",
-				   error);
+        if (error != 0 && printk_ratelimit())
+                printk(KERN_WARNING "error: setting the clock failed (%d)\n",
+		       error);
 
         return 0;
 }