ARM: nomadik: fixup some FSMC merge problems

Due to a clash between refactoring and due to loss of a header
file that remained in my working tree the Nomadik stopped
compiling after switching to the FSMC driver. This patch fixes
it up.

Cc: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Signed-off-by: Artem Bityutskiy <artem.bityutskiy@linux.intel.com>

arch/arm/mach-nomadik/board-nhk8815.c

@@ -37,21 +37,32 @@
 #include <plat/mtu.h>
 #include <plat/pincfg.h>
 
-#include <mach/fsmc.h>
-
 #include "cpu-8815.h"
 
 /* Initial value for SRC control register: all timers use MXTAL/8 source */
 #define SRC_CR_INIT_MASK	0x00007fff
 #define SRC_CR_INIT_VAL		0x2aaa8000
 
+#define ALE_OFF 0x1000000
+#define CLE_OFF 0x800000
+
 /* These addresses span 16MB, so use three individual pages */
 static struct resource nhk8815_nand_resources[] = {
 	{
 		.name = "nand_data",
 		.start = 0x40000000,
 		.end = 0x40000000 + SZ_16K - 1,
 		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_addr",
+		.start = 0x40000000 + ALE_OFF,
+		.end = 0x40000000 +ALE_OFF + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
+	}, {
+		.name = "nand_cmd",
+		.start = 0x40000000 + CLE_OFF,
+		.end = 0x40000000 + CLE_OFF + SZ_16K - 1,
+		.flags = IORESOURCE_MEM,
 	}, {
 		.name  = "fsmc_regs",
 		.start = NOMADIK_FSMC_BASE,
@@ -105,8 +116,6 @@ static struct fsmc_nand_platform_data nhk8815_nand_platform_data = {
 	.partitions = nhk8815_partitions,
 	.nr_partitions = ARRAY_SIZE(nhk8815_partitions),
 	.width = FSMC_NAND_BW8,
-	.ale_off = 0x1000000,
-	.cle_off = 0x800000,
 };
 
 static struct platform_device nhk8815_nand_device = {
@@ -171,6 +180,10 @@ static struct platform_device nhk8815_onenand_device = {
 	.num_resources	= ARRAY_SIZE(nhk8815_onenand_resource),
 };
 
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x)	(NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x)	(NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
 static void __init nhk8815_onenand_init(void)
 {
 #ifdef CONFIG_MTD_ONENAND