staging: comedi: unionxx5: refactor subdevice init

Change the parameters passed to __unioxx5_subdev_init(), we need
the comedi_device pointer to call __comedi_request_region() and
the 'minor' is only used in some kernel noise so remove it. Rename
the parameters 'subdev' and 'subdev_iobase' to simply 's' and
'iobase'.

Use __comedi_request_region() to request the I/O region needed by
the subdevice. Remove the attach noise as well as the error message
when the request_region() fails, comedi_request_reqion() will output
the error message if necessary.

Return -ENOMEM is the kzalloc fails instead of -1.

Fix unioxx5_attach() to use the new parameters to __unioxx5_subdev_init().
Pass on any error codes instead of -1.

Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Cc: Ian Abbott <abbotti@mev.co.uk>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

drivers/staging/comedi/drivers/unioxx5.c

@@ -367,39 +367,37 @@ static int unioxx5_insn_config(struct comedi_device *dev,
 }
 
 /* initializing subdevice with given address */
-static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
-				 int subdev_iobase, int minor)
+static int __unioxx5_subdev_init(struct comedi_device *dev,
+				 struct comedi_subdevice *s,
+				 int iobase)
 {
 	struct unioxx5_subd_priv *usp;
 	int i, to, ndef_flag = 0;
+	int ret;
 
-	if (!request_region(subdev_iobase, UNIOXX5_SIZE, DRIVER_NAME)) {
-		dev_err(subdev->class_dev,
-			"comedi%d: I/O port conflict\n", minor);
-		return -EIO;
-	}
+	ret = __comedi_request_region(dev, iobase, UNIOXX5_SIZE);
+	if (ret)
+		return ret;
+	usp->usp_iobase = iobase;
 
 	usp = kzalloc(sizeof(*usp), GFP_KERNEL);
 	if (usp == NULL)
-		return -1;
-
-	usp->usp_iobase = subdev_iobase;
-	dev_info(subdev->class_dev, "comedi%d: |", minor);
+		return -ENOMEM;
 
 	/* defining modules types */
 	for (i = 0; i < 12; i++) {
 		to = 10000;
 
 		__unioxx5_analog_config(usp, i * 2);
 		/* sends channel number to card */
-		outb(i + 1, subdev_iobase + 5);
-		outb('H', subdev_iobase + 6);	/* requests EEPROM world */
-		while (!(inb(subdev_iobase + 0) & TxBE))
+		outb(i + 1, iobase + 5);
+		outb('H', iobase + 6);	/* requests EEPROM world */
+		while (!(inb(iobase + 0) & TxBE))
 			;	/* waits while writting will be allowed */
-		outb(0, subdev_iobase + 6);
+		outb(0, iobase + 6);
 
 		/* waits while reading of two bytes will be allowed */
-		while (!(inb(subdev_iobase + 0) & Rx2CA)) {
+		while (!(inb(iobase + 0) & Rx2CA)) {
 			if (--to <= 0) {
 				ndef_flag = 1;
 				break;
@@ -410,32 +408,30 @@ static int __unioxx5_subdev_init(struct comedi_subdevice *subdev,
 			usp->usp_module_type[i] = 0;
 			ndef_flag = 0;
 		} else
-			usp->usp_module_type[i] = inb(subdev_iobase + 6);
+			usp->usp_module_type[i] = inb(iobase + 6);
 
-		printk(" [%d] 0x%02x |", i, usp->usp_module_type[i]);
 		udelay(1);
 	}
 
-	printk("\n");
-
 	/* initial subdevice for digital or analog i/o */
-	subdev->type = COMEDI_SUBD_DIO;
-	subdev->private = usp;
-	subdev->subdev_flags = SDF_READABLE | SDF_WRITABLE;
-	subdev->n_chan = UNIOXX5_NUM_OF_CHANS;
-	subdev->maxdata = 0xFFF;
-	subdev->range_table = &range_digital;
-	subdev->insn_read = unioxx5_subdev_read;
-	subdev->insn_write = unioxx5_subdev_write;
+	s->type = COMEDI_SUBD_DIO;
+	s->private = usp;
+	s->subdev_flags = SDF_READABLE | SDF_WRITABLE;
+	s->n_chan = UNIOXX5_NUM_OF_CHANS;
+	s->maxdata = 0xFFF;
+	s->range_table = &range_digital;
+	s->insn_read = unioxx5_subdev_read;
+	s->insn_write = unioxx5_subdev_write;
 	/* for digital modules only!!! */
-	subdev->insn_config = unioxx5_insn_config;
+	s->insn_config = unioxx5_insn_config;
 
 	return 0;
 }
 
 static int unioxx5_attach(struct comedi_device *dev,
 			  struct comedi_devconfig *it)
 {
+	struct comedi_subdevice *s;
 	int iobase, i, n_subd;
 	int id, num, ba;
 	int ret;
@@ -469,9 +465,10 @@ static int unioxx5_attach(struct comedi_device *dev,
 
 	/* initializing each of for same subdevices */
 	for (i = 0; i < n_subd; i++, iobase += UNIOXX5_SUBDEV_ODDS) {
-		if (__unioxx5_subdev_init(&dev->subdevices[i], iobase,
-					  dev->minor) < 0)
-			return -1;
+		s = &dev->subdevices[i];
+		ret = __unioxx5_subdev_init(dev, s, iobase);
+		if (ret)
+			return ret;
 	}
 
 	return 0;