---

yaml
---
r: 138460
b: refs/heads/master
c: 35f88e6
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 712406a6bf59ebf4a00358bb59a4a2a1b2953d90
+refs/heads/master: 35f88e6b06d024ed25e8ed5420c5c8844b54e1a1

trunk/Documentation/PCI/PCIEBUS-HOWTO.txt

@@ -93,7 +93,7 @@ the PCI Express Port Bus driver from loading a service driver.
 
 int pcie_port_service_register(struct pcie_port_service_driver *new)
 
-This API replaces the Linux Driver Model's pci_module_init API. A
+This API replaces the Linux Driver Model's pci_register_driver API. A
 service driver should always calls pcie_port_service_register at
 module init. Note that after service driver being loaded, calls
 such as pci_enable_device(dev) and pci_set_master(dev) are no longer

trunk/Documentation/powerpc/dts-bindings/fsl/dma.txt

@@ -35,30 +35,30 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8349-dma", "fsl,elo-dma";
-		reg = <82a8 4>;
-		ranges = <0 8100 1a4>;
+		reg = <0x82a8 4>;
+		ranges = <0 0x8100 0x1a4>;
 		interrupt-parent = <&ipic>;
-		interrupts = <47 8>;
+		interrupts = <71 8>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <0>;
-			reg = <0 80>;
+			reg = <0 0x80>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <1>;
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <2>;
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8349-dma-channel", "fsl,elo-dma-channel";
 			cell-index = <3>;
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 		};
 	};
 
@@ -93,36 +93,36 @@ Example:
 		#address-cells = <1>;
 		#size-cells = <1>;
 		compatible = "fsl,mpc8540-dma", "fsl,eloplus-dma";
-		reg = <21300 4>;
-		ranges = <0 21100 200>;
+		reg = <0x21300 4>;
+		ranges = <0 0x21100 0x200>;
 		cell-index = <0>;
 		dma-channel@0 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <0 80>;
+			reg = <0 0x80>;
 			cell-index = <0>;
 			interrupt-parent = <&mpic>;
-			interrupts = <14 2>;
+			interrupts = <20 2>;
 		};
 		dma-channel@80 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <80 80>;
+			reg = <0x80 0x80>;
 			cell-index = <1>;
 			interrupt-parent = <&mpic>;
-			interrupts = <15 2>;
+			interrupts = <21 2>;
 		};
 		dma-channel@100 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <100 80>;
+			reg = <0x100 0x80>;
 			cell-index = <2>;
 			interrupt-parent = <&mpic>;
-			interrupts = <16 2>;
+			interrupts = <22 2>;
 		};
 		dma-channel@180 {
 			compatible = "fsl,mpc8540-dma-channel", "fsl,eloplus-dma-channel";
-			reg = <180 80>;
+			reg = <0x180 0x80>;
 			cell-index = <3>;
 			interrupt-parent = <&mpic>;
-			interrupts = <17 2>;
+			interrupts = <23 2>;
 		};
 	};
 

trunk/Documentation/powerpc/dts-bindings/fsl/esdhc.txt

@@ -0,0 +1,24 @@
+* Freescale Enhanced Secure Digital Host Controller (eSDHC)
+
+The Enhanced Secure Digital Host Controller provides an interface
+for MMC, SD, and SDIO types of memory cards.
+
+Required properties:
+  - compatible : should be
+    "fsl,<chip>-esdhc", "fsl,mpc8379-esdhc" for MPC83xx processors.
+    "fsl,<chip>-esdhc", "fsl,mpc8536-esdhc" for MPC85xx processors.
+  - reg : should contain eSDHC registers location and length.
+  - interrupts : should contain eSDHC interrupt.
+  - interrupt-parent : interrupt source phandle.
+  - clock-frequency : specifies eSDHC base clock frequency.
+
+Example:
+
+sdhci@2e000 {
+	compatible = "fsl,mpc8378-esdhc", "fsl,mpc8379-esdhc";
+	reg = <0x2e000 0x1000>;
+	interrupts = <42 0x8>;
+	interrupt-parent = <&ipic>;
+	/* Filled in by U-Boot */
+	clock-frequency = <0>;
+};

trunk/Documentation/tracers/mmiotrace.txt

@@ -78,12 +78,10 @@ to view your kernel log and look for "mmiotrace has lost events" warning. If
 events were lost, the trace is incomplete. You should enlarge the buffers and
 try again. Buffers are enlarged by first seeing how large the current buffers
 are:
-$ cat /debug/tracing/trace_entries
+$ cat /debug/tracing/buffer_size_kb
 gives you a number. Approximately double this number and write it back, for
 instance:
-$ echo 0 > /debug/tracing/tracing_enabled
-$ echo 128000 > /debug/tracing/trace_entries
-$ echo 1 > /debug/tracing/tracing_enabled
+$ echo 128000 > /debug/tracing/buffer_size_kb
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

trunk/MAINTAINERS

@@ -1905,10 +1905,10 @@ W:	http://gigaset307x.sourceforge.net/
 S:	Maintained
 
 HARD DRIVE ACTIVE PROTECTION SYSTEM (HDAPS) DRIVER
-P:	Robert Love
-M:	rlove@rlove.org
-M:	linux-kernel@vger.kernel.org
-W:	http://www.kernel.org/pub/linux/kernel/people/rml/hdaps/
+P:	Frank Seidel
+M:	frank@f-seidel.de
+L:	lm-sensors@lm-sensors.org
+W:	http://www.kernel.org/pub/linux/kernel/people/fseidel/hdaps/
 S:	Maintained
 
 GSPCA FINEPIX SUBDRIVER
@@ -4924,11 +4924,11 @@ L:	zd1211-devs@lists.sourceforge.net (subscribers-only)
 S:	Maintained
 
 ZR36067 VIDEO FOR LINUX DRIVER
-P:	Ronald Bultje
-M:	rbultje@ronald.bitfreak.net
 L:	mjpeg-users@lists.sourceforge.net
+L:	linux-media@vger.kernel.org
 W:	http://mjpeg.sourceforge.net/driver-zoran/
-S:	Maintained
+T:	Mercurial http://linuxtv.org/hg/v4l-dvb
+S:	Odd Fixes
 
 ZS DECSTATION Z85C30 SERIAL DRIVER
 P:	Maciej W. Rozycki

trunk/Makefile

@@ -389,6 +389,7 @@ PHONY += outputmakefile
 # output directory.
 outputmakefile:
 ifneq ($(KBUILD_SRC),)
+	$(Q)ln -fsn $(srctree) source
 	$(Q)$(CONFIG_SHELL) $(srctree)/scripts/mkmakefile \
 	    $(srctree) $(objtree) $(VERSION) $(PATCHLEVEL)
 endif
@@ -946,7 +947,6 @@ ifneq ($(KBUILD_SRC),)
 	    mkdir -p include2;                                          \
 	    ln -fsn $(srctree)/include/asm-$(SRCARCH) include2/asm;     \
 	fi
-	ln -fsn $(srctree) source
 endif
 
 # prepare2 creates a makefile if using a separate output directory

trunk/arch/alpha/kernel/process.c

@@ -93,8 +93,8 @@ common_shutdown_1(void *generic_ptr)
 	if (cpuid != boot_cpuid) {
 		flags |= 0x00040000UL; /* "remain halted" */
 		*pflags = flags;
-		cpu_clear(cpuid, cpu_present_map);
-		cpu_clear(cpuid, cpu_possible_map);
+		set_cpu_present(cpuid, false);
+		set_cpu_possible(cpuid, false);
 		halt();
 	}
 #endif
@@ -120,8 +120,8 @@ common_shutdown_1(void *generic_ptr)
 
 #ifdef CONFIG_SMP
 	/* Wait for the secondaries to halt. */
-	cpu_clear(boot_cpuid, cpu_present_map);
-	cpu_clear(boot_cpuid, cpu_possible_map);
+	set_cpu_present(boot_cpuid, false);
+	set_cpu_possible(boot_cpuid, false);
 	while (cpus_weight(cpu_present_map))
 		barrier();
 #endif

trunk/arch/alpha/kernel/smp.c

@@ -120,12 +120,12 @@ void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
-	cpumask_t mask = cpu_online_map;
 
-	if (cpu_test_and_set(cpuid, mask)) {
+	if (cpu_online(cpuid)) {
 		printk("??, cpu 0x%x already present??\n", cpuid);
 		BUG();
 	}
+	set_cpu_online(cpuid, true);
 
 	/* Turn on machine checks.  */
 	wrmces(7);
@@ -436,8 +436,8 @@ setup_smp(void)
 				((char *)cpubase + i*hwrpb->processor_size);
 			if ((cpu->flags & 0x1cc) == 0x1cc) {
 				smp_num_probed++;
-				cpu_set(i, cpu_possible_map);
-				cpu_set(i, cpu_present_map);
+				set_cpu_possible(i, true);
+				set_cpu_present(i, true);
 				cpu->pal_revision = boot_cpu_palrev;
 			}
 
@@ -470,8 +470,8 @@ smp_prepare_cpus(unsigned int max_cpus)
 
 	/* Nothing to do on a UP box, or when told not to.  */
 	if (smp_num_probed == 1 || max_cpus == 0) {
-		cpu_possible_map = cpumask_of_cpu(boot_cpuid);
-		cpu_present_map = cpumask_of_cpu(boot_cpuid);
+		init_cpu_possible(cpumask_of(boot_cpuid));
+		init_cpu_present(cpumask_of(boot_cpuid));
 		printk(KERN_INFO "SMP mode deactivated.\n");
 		return;
 	}

trunk/arch/ia64/include/asm/kvm.h

@@ -25,6 +25,10 @@
 
 #include <linux/ioctl.h>
 
+/* Select x86 specific features in <linux/kvm.h> */
+#define __KVM_HAVE_IOAPIC
+#define __KVM_HAVE_DEVICE_ASSIGNMENT
+
 /* Architectural interrupt line count. */
 #define KVM_NR_INTERRUPTS 256
 

trunk/arch/ia64/kvm/kvm-ia64.c

@@ -1337,6 +1337,10 @@ static void kvm_release_vm_pages(struct kvm *kvm)
 	}
 }
 
+void kvm_arch_sync_events(struct kvm *kvm)
+{
+}
+
 void kvm_arch_destroy_vm(struct kvm *kvm)
 {
 	kvm_iommu_unmap_guest(kvm);

trunk/arch/ia64/kvm/process.c

@@ -455,13 +455,18 @@ fpswa_ret_t vmm_fp_emulate(int fp_fault, void *bundle, unsigned long *ipsr,
 	if (!vmm_fpswa_interface)
 		return (fpswa_ret_t) {-1, 0, 0, 0};
 
-	/*
-	 * Just let fpswa driver to use hardware fp registers.
-	 * No fp register is valid in memory.
-	 */
 	memset(&fp_state, 0, sizeof(fp_state_t));
 
 	/*
+	 * compute fp_state.  only FP registers f6 - f11 are used by the
+	 * vmm, so set those bits in the mask and set the low volatile
+	 * pointer to point to these registers.
+	 */
+	fp_state.bitmask_low64 = 0xfc0;  /* bit6..bit11 */
+
+	fp_state.fp_state_low_volatile = (fp_state_low_volatile_t *) &regs->f6;
+
+   /*
 	 * unsigned long (*EFI_FPSWA) (
 	 *      unsigned long    trap_type,
 	 *      void             *Bundle,
@@ -545,10 +550,6 @@ void reflect_interruption(u64 ifa, u64 isr, u64 iim,
 		status = vmm_handle_fpu_swa(0, regs, isr);
 		if (!status)
 			return ;
-		else if (-EAGAIN == status) {
-			vcpu_decrement_iip(vcpu);
-			return ;
-		}
 		break;
 	}
 

trunk/arch/powerpc/Kconfig

@@ -594,6 +594,7 @@ config FSL_SOC
 config FSL_PCI
  	bool
 	select PPC_INDIRECT_PCI
+	select PCI_QUIRKS
 
 config 4xx_SOC
 	bool
@@ -730,6 +731,22 @@ config LOWMEM_SIZE
 	hex "Maximum low memory size (in bytes)" if LOWMEM_SIZE_BOOL
 	default "0x30000000"
 
+config LOWMEM_CAM_NUM_BOOL
+	bool "Set number of CAMs to use to map low memory"
+	depends on ADVANCED_OPTIONS && FSL_BOOKE
+	help
+	  This option allows you to set the maximum number of CAM slots that
+	  will be used to map low memory.  There are a limited number of slots
+	  available and even more limited number that will fit in the L1 MMU.
+	  However, using more entries will allow mapping more low memory.  This
+	  can be useful in optimizing the layout of kernel virtual memory.
+
+	  Say N here unless you know what you are doing.
+
+config LOWMEM_CAM_NUM
+	int "Number of CAMs to use to map low memory" if LOWMEM_CAM_NUM_BOOL
+	default 3
+
 config RELOCATABLE
 	bool "Build a relocatable kernel (EXPERIMENTAL)"
 	depends on EXPERIMENTAL && ADVANCED_OPTIONS && FLATMEM && FSL_BOOKE
@@ -794,7 +811,7 @@ config PHYSICAL_START
 
 config PHYSICAL_ALIGN
 	hex
-	default "0x10000000" if FSL_BOOKE
+	default "0x04000000" if FSL_BOOKE
 	help
 	  This value puts the alignment restrictions on physical address
 	  where kernel is loaded and run from. Kernel is compiled for an

trunk/arch/powerpc/boot/Makefile

@@ -70,7 +70,7 @@ src-plat := of.c cuboot-52xx.c cuboot-824x.c cuboot-83xx.c cuboot-85xx.c holly.c
 		cuboot-katmai.c cuboot-rainier.c redboot-8xx.c ep8248e.c \
 		cuboot-warp.c cuboot-85xx-cpm2.c cuboot-yosemite.c simpleboot.c \
 		virtex405-head.S virtex.c redboot-83xx.c cuboot-sam440ep.c \
-		cuboot-acadia.c
+		cuboot-acadia.c cuboot-amigaone.c
 src-boot := $(src-wlib) $(src-plat) empty.c
 
 src-boot := $(addprefix $(obj)/, $(src-boot))
@@ -235,7 +235,9 @@ image-$(CONFIG_PPC_ADDER875)		+= cuImage.adder875-uboot \
 					   dtbImage.adder875-redboot
 
 # Board ports in arch/powerpc/platform/52xx/Kconfig
-image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 cuImage.lite5200b
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200 lite5200.dtb
+image-$(CONFIG_PPC_LITE5200)		+= cuImage.lite5200b lite5200b.dtb
+image-$(CONFIG_PPC_MEDIA5200)		+= cuImage.media5200 media5200.dtb
 
 # Board ports in arch/powerpc/platform/82xx/Kconfig
 image-$(CONFIG_MPC8272_ADS)		+= cuImage.mpc8272ads
@@ -274,6 +276,9 @@ image-$(CONFIG_STORCENTER)		+= cuImage.storcenter
 image-$(CONFIG_MPC7448HPC2)		+= cuImage.mpc7448hpc2
 image-$(CONFIG_PPC_C2K)			+= cuImage.c2k
 
+# Board port in arch/powerpc/platform/amigaone/Kconfig
+image-$(CONFIG_AMIGAONE)		+= cuImage.amigaone
+
 # For 32-bit powermacs, build the COFF and miboot images
 # as well as the ELF images.
 ifeq ($(CONFIG_PPC32),y)