Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upst…

…ream-linus

Pull MIPS fixes from Ralf Baechle:
 "The pending MIPS fixes for 3.19.  All across the field and nothing
  particularly severe or dramatic"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus: (23 commits)
  IRQCHIP: mips-gic: Avoid rerouting timer IRQs for smp-cmp
  MIPS: Fix syscall_get_nr for the syscall exit tracing.
  MIPS: elf2ecoff: Ignore PT_MIPS_ABIFLAGS program headers.
  MIPS: elf2ecoff: Rewrite main processing loop to switch.
  MIPS: fork: Fix MSA/FPU/DSP context duplication race
  MIPS: Fix C0_Pagegrain[IEC] support.
  MIPS: traps: Fix inline asm ctc1 missing .set hardfloat
  MIPS: mipsregs.h: Add write_32bit_cp1_register()
  MIPS: Fix kernel lockup or crash after CPU offline/online
  MIPS: OCTEON: fix kernel crash when offlining a CPU
  MIPS: ARC: Fix build error.
  MIPS: IRQ: Fix disable_irq on CPU IRQs
  MIPS: smp-mt,smp-cmp: Enable all HW IRQs on secondary CPUs
  MIPS: Fix restart of indirect syscalls
  MIPS: ELF: fix loading o32 binaries on 64-bit kernels
  MIPS: mips-cm: Fix sparse warnings
  MIPS: Kconfig: Fix recursive dependency.
  MIPS: Compat: Fix build error if CONFIG_MIPS32_COMPAT but no compat ABI.
  MIPS: JZ4740: Fixup #include's (sparse)
  MIPS: Wire up execveat(2).
  ...

arch/mips/Kconfig

@@ -2656,27 +2656,21 @@ config TRAD_SIGNALS
 	bool
 
 config MIPS32_COMPAT
-	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
-	depends on 64BIT
-	help
-	  Select this option if you want Linux/MIPS 32-bit binary
-	  compatibility. Since all software available for Linux/MIPS is
-	  currently 32-bit you should say Y here.
+	bool
 
 config COMPAT
 	bool
-	depends on MIPS32_COMPAT
-	select ARCH_WANT_OLD_COMPAT_IPC
-	default y
 
 config SYSVIPC_COMPAT
 	bool
-	depends on COMPAT && SYSVIPC
-	default y
 
 config MIPS32_O32
 	bool "Kernel support for o32 binaries"
-	depends on MIPS32_COMPAT
+	depends on 64BIT
+	select ARCH_WANT_OLD_COMPAT_IPC
+	select COMPAT
+	select MIPS32_COMPAT
+	select SYSVIPC_COMPAT if SYSVIPC
 	help
 	  Select this option if you want to run o32 binaries.  These are pure
 	  32-bit binaries as used by the 32-bit Linux/MIPS port.  Most of
@@ -2686,7 +2680,10 @@ config MIPS32_O32
 
 config MIPS32_N32
 	bool "Kernel support for n32 binaries"
-	depends on MIPS32_COMPAT
+	depends on 64BIT
+	select COMPAT
+	select MIPS32_COMPAT
+	select SYSVIPC_COMPAT if SYSVIPC
 	help
 	  Select this option if you want to run n32 binaries.  These are
 	  64-bit binaries using 32-bit quantities for addressing and certain

arch/mips/boot/elf2ecoff.c

@@ -49,7 +49,8 @@
 /*
  * Some extra ELF definitions
  */
-#define PT_MIPS_REGINFO 0x70000000	/* Register usage information */
+#define PT_MIPS_REGINFO 	0x70000000	/* Register usage information */
+#define PT_MIPS_ABIFLAGS	0x70000003	/* Records ABI related flags  */
 
 /* -------------------------------------------------------------------- */
 
@@ -349,39 +350,46 @@ int main(int argc, char *argv[])
 
 	for (i = 0; i < ex.e_phnum; i++) {
 		/* Section types we can ignore... */
-		if (ph[i].p_type == PT_NULL || ph[i].p_type == PT_NOTE ||
-		    ph[i].p_type == PT_PHDR
-		    || ph[i].p_type == PT_MIPS_REGINFO)
+		switch (ph[i].p_type) {
+		case PT_NULL:
+		case PT_NOTE:
+		case PT_PHDR:
+		case PT_MIPS_REGINFO:
+		case PT_MIPS_ABIFLAGS:
 			continue;
-		/* Section types we can't handle... */
-		else if (ph[i].p_type != PT_LOAD) {
-			fprintf(stderr,
-				"Program header %d type %d can't be converted.\n",
-				ex.e_phnum, ph[i].p_type);
-			exit(1);
-		}
-		/* Writable (data) segment? */
-		if (ph[i].p_flags & PF_W) {
-			struct sect ndata, nbss;
 
-			ndata.vaddr = ph[i].p_vaddr;
-			ndata.len = ph[i].p_filesz;
-			nbss.vaddr = ph[i].p_vaddr + ph[i].p_filesz;
-			nbss.len = ph[i].p_memsz - ph[i].p_filesz;
+		case PT_LOAD:
+			/* Writable (data) segment? */
+			if (ph[i].p_flags & PF_W) {
+				struct sect ndata, nbss;
+
+				ndata.vaddr = ph[i].p_vaddr;
+				ndata.len = ph[i].p_filesz;
+				nbss.vaddr = ph[i].p_vaddr + ph[i].p_filesz;
+				nbss.len = ph[i].p_memsz - ph[i].p_filesz;
 
-			combine(&data, &ndata, 0);
-			combine(&bss, &nbss, 1);
-		} else {
-			struct sect ntxt;
+				combine(&data, &ndata, 0);
+				combine(&bss, &nbss, 1);
+			} else {
+				struct sect ntxt;
 
-			ntxt.vaddr = ph[i].p_vaddr;
-			ntxt.len = ph[i].p_filesz;
+				ntxt.vaddr = ph[i].p_vaddr;
+				ntxt.len = ph[i].p_filesz;
 
-			combine(&text, &ntxt, 0);
+				combine(&text, &ntxt, 0);
+			}
+			/* Remember the lowest segment start address. */
+			if (ph[i].p_vaddr < cur_vma)
+				cur_vma = ph[i].p_vaddr;
+			break;
+
+		default:
+			/* Section types we can't handle... */
+			fprintf(stderr,
+				"Program header %d type %d can't be converted.\n",
+				ex.e_phnum, ph[i].p_type);
+			exit(1);
 		}
-		/* Remember the lowest segment start address. */
-		if (ph[i].p_vaddr < cur_vma)
-			cur_vma = ph[i].p_vaddr;
 	}
 
 	/* Sections must be in order to be converted... */

arch/mips/cavium-octeon/smp.c

@@ -240,9 +240,7 @@ static int octeon_cpu_disable(void)
 
 	set_cpu_online(cpu, false);
 	cpu_clear(cpu, cpu_callin_map);
-	local_irq_disable();
 	octeon_fixup_irqs();
-	local_irq_enable();
 
 	flush_cache_all();
 	local_flush_tlb_all();

arch/mips/configs/malta_defconfig

@@ -132,7 +132,6 @@ CONFIG_IP_NF_MATCH_ECN=m
 CONFIG_IP_NF_MATCH_TTL=m
 CONFIG_IP_NF_FILTER=m
 CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_ULOG=m
 CONFIG_IP_NF_MANGLE=m
 CONFIG_IP_NF_TARGET_CLUSTERIP=m
 CONFIG_IP_NF_TARGET_ECN=m
@@ -175,7 +174,6 @@ CONFIG_BRIDGE_EBT_MARK_T=m
 CONFIG_BRIDGE_EBT_REDIRECT=m
 CONFIG_BRIDGE_EBT_SNAT=m
 CONFIG_BRIDGE_EBT_LOG=m
-CONFIG_BRIDGE_EBT_ULOG=m
 CONFIG_BRIDGE_EBT_NFLOG=m
 CONFIG_IP_SCTP=m
 CONFIG_BRIDGE=m
@@ -220,8 +218,6 @@ CONFIG_NET_ACT_SKBEDIT=m
 CONFIG_NET_CLS_IND=y
 CONFIG_CFG80211=m
 CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_MAC80211_RC_DEFAULT_PID=y
 CONFIG_MAC80211_MESH=y
 CONFIG_RFKILL=m
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
@@ -248,19 +244,13 @@ CONFIG_ATA_OVER_ETH=m
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_IDE_GENERIC=y
-CONFIG_BLK_DEV_GENERIC=y
-CONFIG_BLK_DEV_PIIX=y
-CONFIG_BLK_DEV_IT8213=m
-CONFIG_BLK_DEV_TC86C001=m
 CONFIG_RAID_ATTRS=m
-CONFIG_SCSI=m
-CONFIG_BLK_DEV_SD=m
+CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=m
 CONFIG_CHR_DEV_OSST=m
 CONFIG_BLK_DEV_SR=m
 CONFIG_BLK_DEV_SR_VENDOR=y
 CONFIG_CHR_DEV_SG=m
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_CONSTANTS=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_SCSI_SCAN_ASYNC=y
@@ -273,6 +263,8 @@ CONFIG_SCSI_AACRAID=m
 CONFIG_SCSI_AIC7XXX=m
 CONFIG_AIC7XXX_RESET_DELAY_MS=15000
 # CONFIG_AIC7XXX_DEBUG_ENABLE is not set
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
 CONFIG_MD=y
 CONFIG_BLK_DEV_MD=m
 CONFIG_MD_LINEAR=m
@@ -340,6 +332,7 @@ CONFIG_UIO=m
 CONFIG_UIO_CIF=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_REISERFS_FS=m
 CONFIG_REISERFS_PROC_INFO=y
 CONFIG_REISERFS_FS_XATTR=y
@@ -441,4 +434,3 @@ CONFIG_CRYPTO_SERPENT=m
 CONFIG_CRYPTO_TEA=m
 CONFIG_CRYPTO_TWOFISH=m
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRC16=m

arch/mips/include/asm/fpu.h

@@ -64,7 +64,7 @@ static inline int __enable_fpu(enum fpu_mode mode)
 			return SIGFPE;
 
 		/* set FRE */
-		write_c0_config5(read_c0_config5() | MIPS_CONF5_FRE);
+		set_c0_config5(MIPS_CONF5_FRE);
 		goto fr_common;
 
 	case FPU_64BIT:
@@ -74,8 +74,10 @@ static inline int __enable_fpu(enum fpu_mode mode)
 #endif
 		/* fall through */
 	case FPU_32BIT:
-		/* clear FRE */
-		write_c0_config5(read_c0_config5() & ~MIPS_CONF5_FRE);
+		if (cpu_has_fre) {
+			/* clear FRE */
+			clear_c0_config5(MIPS_CONF5_FRE);
+		}
 fr_common:
 		/* set CU1 & change FR appropriately */
 		fr = (int)mode & FPU_FR_MASK;
@@ -182,25 +184,32 @@ static inline int init_fpu(void)
 	int ret = 0;
 
 	if (cpu_has_fpu) {
+		unsigned int config5;
+
 		ret = __own_fpu();
-		if (!ret) {
-			unsigned int config5 = read_c0_config5();
-
-			/*
-			 * Ensure FRE is clear whilst running _init_fpu, since
-			 * single precision FP instructions are used. If FRE
-			 * was set then we'll just end up initialising all 32
-			 * 64b registers.
-			 */
-			write_c0_config5(config5 & ~MIPS_CONF5_FRE);
-			enable_fpu_hazard();
+		if (ret)
+			return ret;
 
+		if (!cpu_has_fre) {
 			_init_fpu();
 
-			/* Restore FRE */
-			write_c0_config5(config5);
-			enable_fpu_hazard();
+			return 0;
 		}
+
+		/*
+		 * Ensure FRE is clear whilst running _init_fpu, since
+		 * single precision FP instructions are used. If FRE
+		 * was set then we'll just end up initialising all 32
+		 * 64b registers.
+		 */
+		config5 = clear_c0_config5(MIPS_CONF5_FRE);
+		enable_fpu_hazard();
+
+		_init_fpu();
+
+		/* Restore FRE */
+		write_c0_config5(config5);
+		enable_fpu_hazard();
 	} else
 		fpu_emulator_init_fpu();
 

arch/mips/include/asm/fw/arc/hinv.h

@@ -119,7 +119,7 @@ union key_u {
 #define SGI_ARCS_REV	10			/* rev .10, 3/04/92 */
 #endif
 
-typedef struct component {
+typedef struct {
 	CONFIGCLASS	Class;
 	CONFIGTYPE	Type;
 	IDENTIFIERFLAG	Flags;
@@ -140,7 +140,7 @@ struct cfgdata {
 };
 
 /* System ID */
-typedef struct systemid {
+typedef struct {
 	CHAR VendorId[8];
 	CHAR ProductId[8];
 } SYSTEMID;
@@ -166,7 +166,7 @@ typedef enum memorytype {
 #endif	/* _NT_PROM */
 } MEMORYTYPE;
 
-typedef struct memorydescriptor {
+typedef struct {
 	MEMORYTYPE	Type;
 	LONG		BasePage;
 	LONG		PageCount;

arch/mips/include/asm/mips-cm.h

@@ -89,9 +89,9 @@ static inline bool mips_cm_has_l2sync(void)
 
 /* Macros to ease the creation of register access functions */
 #define BUILD_CM_R_(name, off)					\
-static inline u32 *addr_gcr_##name(void)			\
+static inline u32 __iomem *addr_gcr_##name(void)		\
 {								\
-	return (u32 *)(mips_cm_base + (off));			\
+	return (u32 __iomem *)(mips_cm_base + (off));		\
 }								\
 								\
 static inline u32 read_gcr_##name(void)				\

arch/mips/include/asm/mipsregs.h

@@ -1386,12 +1386,27 @@ do {									\
 	__res;								\
 })
 
+#define _write_32bit_cp1_register(dest, val, gas_hardfloat)		\
+do {									\
+	__asm__ __volatile__(						\
+	"	.set	push					\n"	\
+	"	.set	reorder					\n"	\
+	"	"STR(gas_hardfloat)"				\n"	\
+	"	ctc1	%0,"STR(dest)"				\n"	\
+	"	.set	pop					\n"	\
+	: : "r" (val));							\
+} while (0)
+
 #ifdef GAS_HAS_SET_HARDFLOAT
 #define read_32bit_cp1_register(source)					\
 	_read_32bit_cp1_register(source, .set hardfloat)
+#define write_32bit_cp1_register(dest, val)				\
+	_write_32bit_cp1_register(dest, val, .set hardfloat)
 #else
 #define read_32bit_cp1_register(source)					\
 	_read_32bit_cp1_register(source, )
+#define write_32bit_cp1_register(dest, val)				\
+	_write_32bit_cp1_register(dest, val, )
 #endif
 
 #ifdef HAVE_AS_DSP

arch/mips/include/asm/syscall.h

@@ -29,13 +29,7 @@
 static inline long syscall_get_nr(struct task_struct *task,
 				  struct pt_regs *regs)
 {
-	/* O32 ABI syscall() - Either 64-bit with O32 or 32-bit */
-	if ((config_enabled(CONFIG_32BIT) ||
-	    test_tsk_thread_flag(task, TIF_32BIT_REGS)) &&
-	    (regs->regs[2] == __NR_syscall))
-		return regs->regs[4];
-	else
-		return regs->regs[2];
+	return current_thread_info()->syscall;
 }
 
 static inline unsigned long mips_get_syscall_arg(unsigned long *arg,

arch/mips/include/asm/thread_info.h

@@ -36,6 +36,7 @@ struct thread_info {
 						 */
 	struct restart_block	restart_block;
 	struct pt_regs		*regs;
+	long			syscall;	/* syscall number */
 };
 
 /*