---

yaml
---
r: 275442
b: refs/heads/master
c: dd2c0ca
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: d03299ee6020b0cc64fc4180162fb2e8795394e1
+refs/heads/master: dd2c0ca1b153b555c09fd8e08f6842e12cf8e87b

trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -71,10 +71,3 @@ Description:	Value of 1 indicates the controller can honor the reset_devices
 		a dump device, as kdump requires resetting the device in order
 		to work reliably.
 
-Where:		/sys/bus/pci/devices/<dev>/ccissX/transport_mode
-Date:		July 2011
-Kernel Version:	3.0
-Contact:	iss_storagedev@hp.com
-Description:	Value of "simple" indicates that the controller has been placed
-		in "simple mode". Value of "performant" indicates that the
-		controller has been placed in "performant mode".

trunk/Documentation/CodingStyle

@@ -166,8 +166,8 @@ if (condition)
 else
 	do_that();
 
-This does not apply if only one branch of a conditional statement is a single
-statement; in the latter case use braces in both branches:
+This does not apply if one branch of a conditional statement is a single
+statement. Use braces in both branches.
 
 if (condition) {
 	do_this();

trunk/Documentation/DocBook/media/v4l/compat.xml

@@ -2486,9 +2486,6 @@ ioctls.</para>
         <listitem>
 	  <para>Flash API. <xref linkend="flash-controls" /></para>
         </listitem>
-        <listitem>
-	  <para>&VIDIOC-CREATE-BUFS; and &VIDIOC-PREPARE-BUF; ioctls.</para>
-        </listitem>
       </itemizedlist>
     </section>
 

trunk/Documentation/DocBook/media/v4l/controls.xml

@@ -232,9 +232,8 @@ control is deprecated. New drivers and applications should use the
 	    <entry>Enables a power line frequency filter to avoid
 flicker. Possible values for <constant>enum v4l2_power_line_frequency</constant> are:
 <constant>V4L2_CID_POWER_LINE_FREQUENCY_DISABLED</constant> (0),
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1),
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2) and
-<constant>V4L2_CID_POWER_LINE_FREQUENCY_AUTO</constant> (3).</entry>
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_50HZ</constant> (1) and
+<constant>V4L2_CID_POWER_LINE_FREQUENCY_60HZ</constant> (2).</entry>
 	  </row>
 	  <row>
 	    <entry><constant>V4L2_CID_HUE_AUTO</constant></entry>

trunk/Documentation/DocBook/media/v4l/io.xml

@@ -927,33 +927,6 @@ ioctl is called.</entry>
 Applications set or clear this flag before calling the
 <constant>VIDIOC_QBUF</constant> ioctl.</entry>
 	  </row>
-	  <row>
-	    <entry><constant>V4L2_BUF_FLAG_PREPARED</constant></entry>
-	    <entry>0x0400</entry>
-	    <entry>The buffer has been prepared for I/O and can be queued by the
-application. Drivers set or clear this flag when the
-<link linkend="vidioc-querybuf">VIDIOC_QUERYBUF</link>, <link
-	  linkend="vidioc-qbuf">VIDIOC_PREPARE_BUF</link>, <link
-	  linkend="vidioc-qbuf">VIDIOC_QBUF</link> or <link
-	  linkend="vidioc-qbuf">VIDIOC_DQBUF</link> ioctl is called.</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_INVALIDATE</constant></entry>
-	    <entry>0x0400</entry>
-	    <entry>Caches do not have to be invalidated for this buffer.
-Typically applications shall use this flag if the data captured in the buffer
-is not going to be touched by the CPU, instead the buffer will, probably, be
-passed on to a DMA-capable hardware unit for further processing or output.
-</entry>
-	  </row>
-	  <row>
-	    <entry><constant>V4L2_BUF_FLAG_NO_CACHE_CLEAN</constant></entry>
-	    <entry>0x0800</entry>
-	    <entry>Caches do not have to be cleaned for this buffer.
-Typically applications shall use this flag for output buffers if the data
-in this buffer has not been created by the CPU but by some DMA-capable unit,
-in which case caches have not been used.</entry>
-	  </row>
 	</tbody>
       </tgroup>
     </table>

trunk/Documentation/DocBook/media/v4l/v4l2.xml

@@ -469,7 +469,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-close;
     &sub-ioctl;
     <!-- All ioctls go here. -->
-    &sub-create-bufs;
     &sub-cropcap;
     &sub-dbg-g-chip-ident;
     &sub-dbg-g-register;
@@ -512,7 +511,6 @@ and discussions on the V4L mailing list.</revremark>
     &sub-queryctrl;
     &sub-query-dv-preset;
     &sub-querystd;
-    &sub-prepare-buf;
     &sub-reqbufs;
     &sub-s-hw-freq-seek;
     &sub-streamon;

trunk/Documentation/DocBook/mtdnand.tmpl

@@ -572,7 +572,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 			</para>
 			<para>
 				The simplest way to activate the FLASH based bad block table support 
-				is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
+				is to set the option NAND_USE_FLASH_BBT in the option field of
 				the nand chip structure before calling nand_scan(). For AG-AND
 				chips is this done by default.
 				This activates the default FLASH based bad block table functionality 
@@ -773,6 +773,20 @@ struct nand_oobinfo {
 				done according to the default builtin scheme.
 			</para>
 		</sect2>
+		<sect2 id="User_space_placement_selection">
+			<title>User space placement selection</title>
+		<para>
+			All non ecc functions like mtd->read and mtd->write use an internal 
+			structure, which can be set by an ioctl. This structure is preset 
+			to the autoplacement default.
+	     		<programlisting>
+	ioctl (fd, MEMSETOOBSEL, oobsel);
+	     		</programlisting>
+			oobsel is a pointer to a user supplied structure of type
+			nand_oobconfig. The contents of this structure must match the 
+			criteria of the filesystem, which will be used. See an example in utils/nandwrite.c.
+		</para>
+		</sect2>
 	</sect1>	
 	<sect1 id="Spare_area_autoplacement_default">
 		<title>Spare area autoplacement default schemes</title>
@@ -1144,6 +1158,9 @@ in this page</entry>
 		These constants are defined in nand.h. They are ored together to describe
 		the functionality.
      		<programlisting>
+/* Use a flash based bad block table. This option is parsed by the
+ * default bad block table function (nand_default_bbt). */
+#define NAND_USE_FLASH_BBT	0x00010000
 /* The hw ecc generator provides a syndrome instead a ecc value on read 
  * This can only work if we have the ecc bytes directly behind the 
  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */

trunk/Documentation/block/switching-sched.txt

@@ -1,6 +1,6 @@
 To choose IO schedulers at boot time, use the argument 'elevator=deadline'.
-'noop' and 'cfq' (the default) are also available. IO schedulers are assigned
-globally at boot time only presently.
+'noop', 'as' and 'cfq' (the default) are also available. IO schedulers are
+assigned globally at boot time only presently.
 
 Each io queue has a set of io scheduler tunables associated with it. These
 tunables control how the io scheduler works. You can find these entries