---

yaml
---
r: 96169
b: refs/heads/master
c: 0e99133
h: refs/heads/master
i:
  96167: 058a20f
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 148c69b4b0ec267b08d3619651ae4a10a1768b04
+refs/heads/master: 0e9913362a967377eb886bbdf305ec58aa07a878

trunk/Documentation/filesystems/Locking

@@ -92,6 +92,7 @@ prototypes:
 	void (*destroy_inode)(struct inode *);
 	void (*dirty_inode) (struct inode *);
 	int (*write_inode) (struct inode *, int);
+	void (*put_inode) (struct inode *);
 	void (*drop_inode) (struct inode *);
 	void (*delete_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
@@ -114,6 +115,7 @@ alloc_inode:		no	no	no
 destroy_inode:		no
 dirty_inode:		no				(must not sleep)
 write_inode:		no
+put_inode:		no
 drop_inode:		no				!!!inode_lock!!!
 delete_inode:		no
 put_super:		yes	yes	no

trunk/Documentation/filesystems/vfs.txt

@@ -205,6 +205,7 @@ struct super_operations {
 
         void (*dirty_inode) (struct inode *);
         int (*write_inode) (struct inode *, int);
+        void (*put_inode) (struct inode *);
         void (*drop_inode) (struct inode *);
         void (*delete_inode) (struct inode *);
         void (*put_super) (struct super_block *);
@@ -245,6 +246,9 @@ or bottom half).
 	inode to disc.  The second parameter indicates whether the write
 	should be synchronous or not, not all filesystems check this flag.
 
+  put_inode: called when the VFS inode is removed from the inode
+	cache.
+
   drop_inode: called when the last access to the inode is dropped,
 	with the inode_lock spinlock held.
 

trunk/Documentation/s390/CommonIO

@@ -8,6 +8,17 @@ Command line parameters
 
   Enable logging of debug information in case of ccw device timeouts.
 
+
+* cio_msg = yes | no
+
+  Determines whether information on found devices and sensed device 
+  characteristics should be shown during startup or when new devices are
+  found, i. e. messages of the types "Detected device 0.0.4711 on subchannel
+  0.0.0042" and "SenseID: Device 0.0.4711 reports: ...".
+
+  Default is off.
+
+
 * cio_ignore = {all} |
 	       {<device> | <range of devices>} |
 	       {!<device> | !<range of devices>}

trunk/MAINTAINERS

@@ -2112,10 +2112,12 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P:	Jeff Kirsher
-M:	jeffrey.t.kirsher@intel.com
+P:	Auke Kok
+M:	auke-jan.h.kok@intel.com
 P:	Jesse Brandeburg
 M:	jesse.brandeburg@intel.com
+P:	Jeff Kirsher
+M:	jeffrey.t.kirsher@intel.com
 P:	Bruce Allan
 M:	bruce.w.allan@intel.com
 P:	John Ronciak

trunk/arch/cris/kernel/sys_cris.c

@@ -40,11 +40,8 @@ asmlinkage int sys_pipe(unsigned long __user * fildes)
         error = do_pipe(fd);
         unlock_kernel();
         if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int))) {
-			sys_close(fd[0]);
-			sys_close(fd[1]);
+                if (copy_to_user(fildes, fd, 2*sizeof(int)))
                         error = -EFAULT;
-		}
         }
         return error;
 }

trunk/arch/m32r/kernel/sys_m32r.c

@@ -90,11 +90,8 @@ sys_pipe(unsigned long r0, unsigned long r1, unsigned long r2,
 
 	error = do_pipe(fd);
 	if (!error) {
-		if (copy_to_user((void __user *)r0, fd, 2*sizeof(int))) {
-			sys_close(fd[0]);
-			sys_close(fd[1]);
+		if (copy_to_user((void __user *)r0, fd, 2*sizeof(int)))
 			error = -EFAULT;
-		}
 	}
 	return error;
 }

trunk/arch/s390/Kconfig

@@ -430,13 +430,6 @@ config CMM_IUCV
 	  Select this option to enable the special message interface to
 	  the cooperative memory management.
 
-config PAGE_STATES
-	bool "Unused page notification"
-	help
-	  This enables the notification of unused pages to the
-	  hypervisor. The ESSA instruction is used to do the states
-	  changes between a page that has content and the unused state.
-
 config VIRT_TIMER
 	bool "Virtual CPU timer support"
 	help

trunk/arch/s390/kernel/compat_wrapper.S

@@ -121,7 +121,7 @@ sys32_ptrace_wrapper:
 	lgfr	%r3,%r3			# long
 	llgtr	%r4,%r4			# long
 	llgfr	%r5,%r5			# long
-	jg	compat_sys_ptrace	# branch to system call
+	jg	sys_ptrace		# branch to system call
 
 	.globl	sys32_alarm_wrapper
 sys32_alarm_wrapper:

trunk/arch/s390/kernel/entry.S

@@ -279,6 +279,8 @@ sysc_do_restart:
 	st	%r2,SP_R2(%r15)   # store return value (change R2 on stack)
 
 sysc_return:
+	tm	SP_PSW+1(%r15),0x01	# returning to user ?
+	bno	BASED(sysc_restore)
 	tm	__TI_flags+3(%r9),_TIF_WORK_SVC
 	bnz	BASED(sysc_work)  # there is work to do (signals etc.)
 sysc_restore:
@@ -310,8 +312,6 @@ sysc_work_loop:
 # One of the work bits is on. Find out which one.
 #
 sysc_work:
-	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-	bno	BASED(sysc_restore)
 	tm	__TI_flags+3(%r9),_TIF_MCCK_PENDING
 	bo	BASED(sysc_mcck_pending)
 	tm	__TI_flags+3(%r9),_TIF_NEED_RESCHED
@@ -602,6 +602,12 @@ io_no_vtime:
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	basr	%r14,%r1		# branch to standard irq handler
 io_return:
+	tm	SP_PSW+1(%r15),0x01	# returning to user ?
+#ifdef CONFIG_PREEMPT
+	bno	BASED(io_preempt)	# no -> check for preemptive scheduling
+#else
+	bno	BASED(io_restore)	# no-> skip resched & signal
+#endif
 	tm	__TI_flags+3(%r9),_TIF_WORK_INT
 	bnz	BASED(io_work)		# there is work to do (signals etc.)
 io_restore:
@@ -623,18 +629,10 @@ io_restore_trace_psw:
 	.long	0, io_restore_trace + 0x80000000
 #endif
 
-#
-# switch to kernel stack, then check the TIF bits
-#
-io_work:
-	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-#ifndef CONFIG_PREEMPT
-	bno	BASED(io_restore)	# no-> skip resched & signal
-#else
-	bnz	BASED(io_work_user)	# no -> check for preemptive scheduling
-	# check for preemptive scheduling
+#ifdef CONFIG_PREEMPT
+io_preempt:
 	icm	%r0,15,__TI_precount(%r9)
-	bnz	BASED(io_restore)	# preemption disabled
+	bnz	BASED(io_restore)
 	l	%r1,SP_R15(%r15)
 	s	%r1,BASED(.Lc_spsize)
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
@@ -648,7 +646,10 @@ io_resume_loop:
 	br	%r1			# call schedule
 #endif
 
-io_work_user:
+#
+# switch to kernel stack, then check the TIF bits
+#
+io_work:
 	l	%r1,__LC_KERNEL_STACK
 	s	%r1,BASED(.Lc_spsize)
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)

trunk/arch/s390/kernel/entry64.S

@@ -271,6 +271,8 @@ sysc_noemu:
 	stg	%r2,SP_R2(%r15) # store return value (change R2 on stack)
 
 sysc_return:
+	tm	SP_PSW+1(%r15),0x01	# returning to user ?
+	jno	sysc_restore
 	tm	__TI_flags+7(%r9),_TIF_WORK_SVC
 	jnz	sysc_work	# there is work to do (signals etc.)
 sysc_restore:
@@ -302,8 +304,6 @@ sysc_work_loop:
 # One of the work bits is on. Find out which one.
 #
 sysc_work:
-	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-	jno	sysc_restore
 	tm	__TI_flags+7(%r9),_TIF_MCCK_PENDING
 	jo	sysc_mcck_pending
 	tm	__TI_flags+7(%r9),_TIF_NEED_RESCHED
@@ -585,6 +585,12 @@ io_no_vtime:
 	la	%r2,SP_PTREGS(%r15)	# address of register-save area
 	brasl	%r14,do_IRQ		# call standard irq handler
 io_return:
+	tm	SP_PSW+1(%r15),0x01	# returning to user ?
+#ifdef CONFIG_PREEMPT
+	jno	io_preempt		# no -> check for preemptive scheduling
+#else
+	jno	io_restore		# no-> skip resched & signal
+#endif
 	tm	__TI_flags+7(%r9),_TIF_WORK_INT
 	jnz	io_work 		# there is work to do (signals etc.)
 io_restore:
@@ -606,41 +612,10 @@ io_restore_trace_psw:
 	.quad	0, io_restore_trace
 #endif
 
-#
-# There is work todo, we need to check if we return to userspace, then
-# check, if we are in SIE, if yes leave it
-#
-io_work:
-	tm	SP_PSW+1(%r15),0x01	# returning to user ?
-#ifndef CONFIG_PREEMPT
-#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
-	jnz	io_work_user		# yes -> no need to check for SIE
-	la	%r1, BASED(sie_opcode)	# we return to kernel here
-	lg	%r2, SP_PSW+8(%r15)
-	clc	0(2,%r1), 0(%r2)	# is current instruction = SIE?
-	jne	io_restore		# no-> return to kernel
-	lg	%r1, SP_PSW+8(%r15)	# yes-> add 4 bytes to leave SIE
-	aghi	%r1, 4
-	stg	%r1, SP_PSW+8(%r15)
-	j	io_restore		# return to kernel
-#else
-	jno	io_restore		# no-> skip resched & signal
-#endif
-#else
-	jnz	io_work_user		# yes -> do resched & signal
-#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
-	la	%r1, BASED(sie_opcode)
-	lg	%r2, SP_PSW+8(%r15)
-	clc	0(2,%r1), 0(%r2)	# is current instruction = SIE?
-	jne	0f			# no -> leave PSW alone
-	lg	%r1, SP_PSW+8(%r15)	# yes-> add 4 bytes to leave SIE
-	aghi	%r1, 4
-	stg	%r1, SP_PSW+8(%r15)
-0:
-#endif
-	# check for preemptive scheduling
+#ifdef CONFIG_PREEMPT
+io_preempt:
 	icm	%r0,15,__TI_precount(%r9)
-	jnz	io_restore		# preemption is disabled
+	jnz	io_restore
 	# switch to kernel stack
 	lg	%r1,SP_R15(%r15)
 	aghi	%r1,-SP_SIZE
@@ -654,7 +629,10 @@ io_resume_loop:
 	jg	preempt_schedule_irq
 #endif
 
-io_work_user:
+#
+# switch to kernel stack, then check TIF bits
+#
+io_work:
 	lg	%r1,__LC_KERNEL_STACK
 	aghi	%r1,-SP_SIZE
 	mvc	SP_PTREGS(__PT_SIZE,%r1),SP_PTREGS(%r15)
@@ -675,11 +653,6 @@ io_work_loop:
 	j	io_restore
 io_work_done:
 
-#if defined(CONFIG_KVM) || defined(CONFIG_KVM_MODULE)
-sie_opcode:
-	.long 0xb2140000
-#endif
-
 #
 # _TIF_MCCK_PENDING is set, call handler
 #