---

yaml
---
r: 21309
b: refs/heads/master
c: 651be26
h: refs/heads/master
i:
  21307: 9c56583
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 71de1f3dd14e3e39cef929506a9526779f5a447d
+refs/heads/master: 651be26f2daf31e61faf4b55ada709cf39ec76a2

trunk/Documentation/networking/README.ipw2200

@@ -30,6 +30,7 @@ Index
 2.   Ad-Hoc Networking
 3.   Interacting with Wireless Tools
 3.1. iwconfig mode
+3.2. iwconfig sens
 4.   About the Version Numbers
 5.   Firmware installation
 6.   Support
@@ -383,6 +384,15 @@ When configuring the mode of the adapter, all run-time configured parameters
 are reset to the value used when the module was loaded.  This includes
 channels, rates, ESSID, etc.
 
+3.2 iwconfig sens
+-----------------------------------------------
+
+The 'iwconfig ethX sens XX' command will not set the signal sensitivity
+threshold, as described in iwconfig documentation, but rather the number
+of consecutive missed beacons that will trigger handover, i.e. roaming
+to another access point. At the same time, it will set the disassociation
+threshold to 3 times the given value.
+
 
 4.   About the Version Numbers
 -----------------------------------------------

trunk/drivers/net/wireless/ipw2200.c

@@ -8608,6 +8608,52 @@ static int ipw_wx_get_nick(struct net_device *dev,
 	return 0;
 }
 
+static int ipw_wx_set_sens(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *extra)
+{
+	struct ipw_priv *priv = ieee80211_priv(dev);
+	int err = 0;
+
+	IPW_DEBUG_WX("Setting roaming threshold to %d\n", wrqu->sens.value);
+	IPW_DEBUG_WX("Setting disassociate threshold to %d\n", 3*wrqu->sens.value);
+	mutex_lock(&priv->mutex);
+
+	if (wrqu->sens.fixed == 0)
+	{
+		priv->roaming_threshold = IPW_MB_ROAMING_THRESHOLD_DEFAULT;
+		priv->disassociate_threshold = IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT;
+		goto out;
+	}
+	if ((wrqu->sens.value > IPW_MB_ROAMING_THRESHOLD_MAX) ||
+	    (wrqu->sens.value < IPW_MB_ROAMING_THRESHOLD_MIN)) {
+		err = -EINVAL;
+		goto out;
+	}
+
+	priv->roaming_threshold = wrqu->sens.value;
+	priv->disassociate_threshold = 3*wrqu->sens.value;
+      out:
+	mutex_unlock(&priv->mutex);
+	return err;
+}
+
+static int ipw_wx_get_sens(struct net_device *dev,
+			    struct iw_request_info *info,
+			    union iwreq_data *wrqu, char *extra)
+{
+	struct ipw_priv *priv = ieee80211_priv(dev);
+	mutex_lock(&priv->mutex);
+	wrqu->sens.fixed = 1;
+	wrqu->sens.value = priv->roaming_threshold;
+	mutex_unlock(&priv->mutex);
+
+	IPW_DEBUG_WX("GET roaming threshold -> %s %d \n",
+		     wrqu->power.disabled ? "OFF" : "ON", wrqu->power.value);
+
+	return 0;
+}
+
 static int ipw_wx_set_rate(struct net_device *dev,
 			   struct iw_request_info *info,
 			   union iwreq_data *wrqu, char *extra)
@@ -9429,6 +9475,8 @@ static iw_handler ipw_wx_handlers[] = {
 	IW_IOCTL(SIOCGIWFREQ) = ipw_wx_get_freq,
 	IW_IOCTL(SIOCSIWMODE) = ipw_wx_set_mode,
 	IW_IOCTL(SIOCGIWMODE) = ipw_wx_get_mode,
+	IW_IOCTL(SIOCSIWSENS) = ipw_wx_set_sens,
+	IW_IOCTL(SIOCGIWSENS) = ipw_wx_get_sens,
 	IW_IOCTL(SIOCGIWRANGE) = ipw_wx_get_range,
 	IW_IOCTL(SIOCSIWAP) = ipw_wx_set_wap,
 	IW_IOCTL(SIOCGIWAP) = ipw_wx_get_wap,

trunk/drivers/net/wireless/ipw2200.h

@@ -246,8 +246,10 @@ enum connection_manager_assoc_states {
 #define HOST_NOTIFICATION_S36_MEASUREMENT_REFUSED       31
 
 #define HOST_NOTIFICATION_STATUS_BEACON_MISSING         1
-#define IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT           24
+#define IPW_MB_ROAMING_THRESHOLD_MIN                    1
 #define IPW_MB_ROAMING_THRESHOLD_DEFAULT                8
+#define IPW_MB_ROAMING_THRESHOLD_MAX                    30
+#define IPW_MB_DISASSOCIATE_THRESHOLD_DEFAULT           3*IPW_MB_ROAMING_THRESHOLD_DEFAULT
 #define IPW_REAL_RATE_RX_PACKET_THRESHOLD               300
 
 #define MACADRR_BYTE_LEN                     6