[SCSI] mvsas: split driver into multiple files

Split mvsas driver into multiple source codes, based on the split
and function distribution found in Marvell's mvsas update.

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/mvsas/Makefile

@@ -22,5 +22,6 @@
 # USA
 
 obj-$(CONFIG_SCSI_MVSAS) += mvsas.o
-mvsas-y +=  mv_sas.o
-
+mvsas-y +=  mv_init.o  \
+           mv_sas.o   \
+           mv_64xx.o

drivers/scsi/mvsas/mv_64xx.c

@@ -0,0 +1,184 @@
+/*
+	mv_64xx.c - Marvell 88SE6440 SAS/SATA support
+
+	Copyright 2007 Red Hat, Inc.
+	Copyright 2008 Marvell. <kewei@marvell.com>
+
+	This program is free software; you can redistribute it and/or
+	modify it under the terms of the GNU General Public License as
+	published by the Free Software Foundation; either version 2,
+	or (at your option) any later version.
+
+	This program is distributed in the hope that it will be useful,
+	but WITHOUT ANY WARRANTY; without even the implied warranty
+	of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+	See the GNU General Public License for more details.
+
+	You should have received a copy of the GNU General Public
+	License along with this program; see the file COPYING.	If not,
+	write to the Free Software Foundation, 675 Mass Ave, Cambridge,
+	MA 02139, USA.
+
+ */
+
+#include "mv_sas.h"
+#include "mv_64xx.h"
+#include "mv_chips.h"
+
+void mvs_detect_porttype(struct mvs_info *mvi, int i)
+{
+	void __iomem *regs = mvi->regs;
+	u32 reg;
+	struct mvs_phy *phy = &mvi->phy[i];
+
+	/* TODO check & save device type */
+	reg = mr32(GBL_PORT_TYPE);
+
+	if (reg & MODE_SAS_SATA & (1 << i))
+		phy->phy_type |= PORT_TYPE_SAS;
+	else
+		phy->phy_type |= PORT_TYPE_SATA;
+}
+
+void mvs_enable_xmt(struct mvs_info *mvi, int PhyId)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(PCS);
+	if (mvi->chip->n_phy <= 4)
+		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT);
+	else
+		tmp |= 1 << (PhyId + PCS_EN_PORT_XMT_SHIFT2);
+	mw32(PCS, tmp);
+}
+
+void __devinit mvs_phy_hacks(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	/* workaround for SATA R-ERR, to ignore phy glitch */
+	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+	tmp &= ~(1 << 9);
+	tmp |= (1 << 10);
+	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+
+	/* enable retry 127 times */
+	mvs_cw32(regs, CMD_SAS_CTL1, 0x7f7f);
+
+	/* extend open frame timeout to max */
+	tmp = mvs_cr32(regs, CMD_SAS_CTL0);
+	tmp &= ~0xffff;
+	tmp |= 0x3fff;
+	mvs_cw32(regs, CMD_SAS_CTL0, tmp);
+
+	/* workaround for WDTIMEOUT , set to 550 ms */
+	mvs_cw32(regs, CMD_WD_TIMER, 0x86470);
+
+	/* not to halt for different port op during wideport link change */
+	mvs_cw32(regs, CMD_APP_ERR_CONFIG, 0xffefbf7d);
+
+	/* workaround for Seagate disk not-found OOB sequence, recv
+	 * COMINIT before sending out COMWAKE */
+	tmp = mvs_cr32(regs, CMD_PHY_MODE_21);
+	tmp &= 0x0000ffff;
+	tmp |= 0x00fa0000;
+	mvs_cw32(regs, CMD_PHY_MODE_21, tmp);
+
+	tmp = mvs_cr32(regs, CMD_PHY_TIMER);
+	tmp &= 0x1fffffff;
+	tmp |= (2U << 29);	/* 8 ms retry */
+	mvs_cw32(regs, CMD_PHY_TIMER, tmp);
+
+	/* TEST - for phy decoding error, adjust voltage levels */
+	mw32(P0_VSR_ADDR + 0, 0x8);
+	mw32(P0_VSR_DATA + 0, 0x2F0);
+
+	mw32(P0_VSR_ADDR + 8, 0x8);
+	mw32(P0_VSR_DATA + 8, 0x2F0);
+
+	mw32(P0_VSR_ADDR + 16, 0x8);
+	mw32(P0_VSR_DATA + 16, 0x2F0);
+
+	mw32(P0_VSR_ADDR + 24, 0x8);
+	mw32(P0_VSR_DATA + 24, 0x2F0);
+
+}
+
+void mvs_hba_interrupt_enable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(GBL_CTL);
+
+	mw32(GBL_CTL, tmp | INT_EN);
+}
+
+void mvs_hba_interrupt_disable(struct mvs_info *mvi)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp;
+
+	tmp = mr32(GBL_CTL);
+
+	mw32(GBL_CTL, tmp & ~INT_EN);
+}
+
+void mvs_free_reg_set(struct mvs_info *mvi, struct mvs_port *port)
+{
+	void __iomem *regs = mvi->regs;
+	u32 tmp, offs;
+	u8 *tfs = &port->taskfileset;
+
+	if (*tfs == MVS_ID_NOT_MAPPED)
+		return;
+
+	offs = 1U << ((*tfs & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+	if (*tfs < 16) {
+		tmp = mr32(PCS);
+		mw32(PCS, tmp & ~offs);
+	} else {
+		tmp = mr32(CTL);
+		mw32(CTL, tmp & ~offs);
+	}
+
+	tmp = mr32(INT_STAT_SRS) & (1U << *tfs);
+	if (tmp)
+		mw32(INT_STAT_SRS, tmp);
+
+	*tfs = MVS_ID_NOT_MAPPED;
+}
+
+u8 mvs_assign_reg_set(struct mvs_info *mvi, struct mvs_port *port)
+{
+	int i;
+	u32 tmp, offs;
+	void __iomem *regs = mvi->regs;
+
+	if (port->taskfileset != MVS_ID_NOT_MAPPED)
+		return 0;
+
+	tmp = mr32(PCS);
+
+	for (i = 0; i < mvi->chip->srs_sz; i++) {
+		if (i == 16)
+			tmp = mr32(CTL);
+		offs = 1U << ((i & 0x0f) + PCS_EN_SATA_REG_SHIFT);
+		if (!(tmp & offs)) {
+			port->taskfileset = i;
+
+			if (i < 16)
+				mw32(PCS, tmp | offs);
+			else
+				mw32(CTL, tmp | offs);
+			tmp = mr32(INT_STAT_SRS) & (1U << i);
+			if (tmp)
+				mw32(INT_STAT_SRS, tmp);
+			return 0;
+		}
+	}
+	return MVS_ID_NOT_MAPPED;
+}
+

drivers/scsi/mvsas/mv_64xx.h

@@ -0,0 +1,92 @@
+#ifndef _MVS64XX_REG_H_
+#define _MVS64XX_REG_H_
+
+/* enhanced mode registers (BAR4) */
+enum hw_registers {
+	MVS_GBL_CTL		= 0x04,  /* global control */
+	MVS_GBL_INT_STAT	= 0x08,  /* global irq status */
+	MVS_GBL_PI		= 0x0C,  /* ports implemented bitmask */
+	MVS_GBL_PORT_TYPE	= 0xa0,  /* port type */
+
+	MVS_CTL			= 0x100, /* SAS/SATA port configuration */
+	MVS_PCS			= 0x104, /* SAS/SATA port control/status */
+	MVS_CMD_LIST_LO		= 0x108, /* cmd list addr */
+	MVS_CMD_LIST_HI		= 0x10C,
+	MVS_RX_FIS_LO		= 0x110, /* RX FIS list addr */
+	MVS_RX_FIS_HI		= 0x114,
+
+	MVS_TX_CFG		= 0x120, /* TX configuration */
+	MVS_TX_LO		= 0x124, /* TX (delivery) ring addr */
+	MVS_TX_HI		= 0x128,
+
+	MVS_TX_PROD_IDX		= 0x12C, /* TX producer pointer */
+	MVS_TX_CONS_IDX		= 0x130, /* TX consumer pointer (RO) */
+	MVS_RX_CFG		= 0x134, /* RX configuration */
+	MVS_RX_LO		= 0x138, /* RX (completion) ring addr */
+	MVS_RX_HI		= 0x13C,
+	MVS_RX_CONS_IDX		= 0x140, /* RX consumer pointer (RO) */
+
+	MVS_INT_COAL		= 0x148, /* Int coalescing config */
+	MVS_INT_COAL_TMOUT	= 0x14C, /* Int coalescing timeout */
+	MVS_INT_STAT		= 0x150, /* Central int status */
+	MVS_INT_MASK		= 0x154, /* Central int enable */
+	MVS_INT_STAT_SRS	= 0x158, /* SATA register set status */
+	MVS_INT_MASK_SRS	= 0x15C,
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_INT_STAT		= 0x160, /* port0 interrupt status */
+	MVS_P0_INT_MASK		= 0x164, /* port0 interrupt mask */
+	MVS_P4_INT_STAT		= 0x200, /* Port 4 interrupt status */
+	MVS_P4_INT_MASK		= 0x204, /* Port 4 interrupt enable mask */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_SER_CTLSTAT	= 0x180, /* port0 serial control/status */
+	MVS_P4_SER_CTLSTAT	= 0x220, /* port4 serial control/status */
+
+	MVS_CMD_ADDR		= 0x1B8, /* Command register port (addr) */
+	MVS_CMD_DATA		= 0x1BC, /* Command register port (data) */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_CFG_ADDR		= 0x1C0, /* port0 phy register address */
+	MVS_P0_CFG_DATA		= 0x1C4, /* port0 phy register data */
+	MVS_P4_CFG_ADDR		= 0x230, /* Port 4 config address */
+	MVS_P4_CFG_DATA		= 0x234, /* Port 4 config data */
+
+					 /* ports 1-3 follow after this */
+	MVS_P0_VSR_ADDR		= 0x1E0, /* port0 VSR address */
+	MVS_P0_VSR_DATA		= 0x1E4, /* port0 VSR data */
+	MVS_P4_VSR_ADDR		= 0x250, /* port 4 VSR addr */
+	MVS_P4_VSR_DATA		= 0x254, /* port 4 VSR data */
+};
+
+enum pci_cfg_registers {
+	PCR_PHY_CTL		= 0x40,
+	PCR_PHY_CTL2		= 0x90,
+	PCR_DEV_CTRL		= 0xE8,
+};
+
+/*  SAS/SATA Vendor Specific Port Registers */
+enum sas_sata_vsp_regs {
+	VSR_PHY_STAT		= 0x00, /* Phy Status */
+	VSR_PHY_MODE1		= 0x01, /* phy tx */
+	VSR_PHY_MODE2		= 0x02, /* tx scc */
+	VSR_PHY_MODE3		= 0x03, /* pll */
+	VSR_PHY_MODE4		= 0x04, /* VCO */
+	VSR_PHY_MODE5		= 0x05, /* Rx */
+	VSR_PHY_MODE6		= 0x06, /* CDR */
+	VSR_PHY_MODE7		= 0x07, /* Impedance */
+	VSR_PHY_MODE8		= 0x08, /* Voltage */
+	VSR_PHY_MODE9		= 0x09, /* Test */
+	VSR_PHY_MODE10		= 0x0A, /* Power */
+	VSR_PHY_MODE11		= 0x0B, /* Phy Mode */
+	VSR_PHY_VS0		= 0x0C, /* Vednor Specific 0 */
+	VSR_PHY_VS1		= 0x0D, /* Vednor Specific 1 */
+};
+
+struct mvs_prd {
+	__le64			addr;		/* 64-bit buffer address */
+	__le32			reserved;
+	__le32			len;		/* 16-bit length */
+};
+
+#endif