---

yaml
---
r: 270615
b: refs/heads/master
c: 6d4baf0
h: refs/heads/master
i:
  270613: 6e9f3a1
  270611: 965b0f9
  270607: 8fe814c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 9430148d800dd929ad73da4c6afb67f793f8af43
+refs/heads/master: 6d4baf084f4d8dc43cf5d5a3c182018604afa80c

trunk/Documentation/DocBook/writing-an-alsa-driver.tmpl

@@ -4288,7 +4288,7 @@ struct _snd_pcm_runtime {
 <![CDATA[
   struct snd_rawmidi *rmidi;
   snd_mpu401_uart_new(card, 0, MPU401_HW_MPU401, port, info_flags,
-                      irq, &rmidi);
+                      irq, irq_flags, &rmidi);
 ]]>
           </programlisting>
         </informalexample>
@@ -4343,13 +4343,6 @@ struct _snd_pcm_runtime {
 	by itself to start processing the output stream in the irq handler.
 	</para>
 
-	<para>
-	If the MPU-401 interface shares its interrupt with the other logical
-	devices on the card, set <constant>MPU401_INFO_IRQ_HOOK</constant>
-	(see <link linkend="midi-interface-interrupt-handler"><citetitle>
-	below</citetitle></link>).
-	</para>
-
       <para>
         Usually, the port address corresponds to the command port and
         port + 1 corresponds to the data port. If not, you may change
@@ -4382,26 +4375,27 @@ struct _snd_pcm_runtime {
       </para>
 
       <para>
-	The 6th argument specifies the ISA irq number that will be
-	allocated.  If no interrupt is to be allocated (because your
-	code is already allocating a shared interrupt, or because the
-	device does not use interrupts), pass -1 instead.
-	For a MPU-401 device without an interrupt, a polling timer
-	will be used instead.
+        The 6th argument specifies the irq number for UART. If the irq
+      is already allocated, pass 0 to the 7th argument
+      (<parameter>irq_flags</parameter>). Otherwise, pass the flags
+      for irq allocation 
+      (<constant>SA_XXX</constant> bits) to it, and the irq will be
+      reserved by the mpu401-uart layer. If the card doesn't generate
+      UART interrupts, pass -1 as the irq number. Then a timer
+      interrupt will be invoked for polling. 
       </para>
     </section>
 
     <section id="midi-interface-interrupt-handler">
       <title>Interrupt Handler</title>
       <para>
         When the interrupt is allocated in
-      <function>snd_mpu401_uart_new()</function>, an exclusive ISA
-      interrupt handler is automatically used, hence you don't have
-      anything else to do than creating the mpu401 stuff.  Otherwise, you
-      have to set <constant>MPU401_INFO_IRQ_HOOK</constant>, and call
-      <function>snd_mpu401_uart_interrupt()</function> explicitly from your
-      own interrupt handler when it has determined that a UART interrupt
-      has occurred.
+      <function>snd_mpu401_uart_new()</function>, the private
+      interrupt handler is used, hence you don't have anything else to do
+      than creating the mpu401 stuff. Otherwise, you have to call
+      <function>snd_mpu401_uart_interrupt()</function> explicitly when
+      a UART interrupt is invoked and checked in your own interrupt
+      handler.  
       </para>
 
       <para>

trunk/Documentation/sound/alsa/ALSA-Configuration.txt

@@ -886,12 +886,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 		disable)
     power_save_controller - Reset HD-audio controller in power-saving mode
 		(default = on)
-    align_buffer_size - Force rounding of buffer/period sizes to multiples
-    		      of 128 bytes. This is more efficient in terms of memory
-		      access but isn't required by the HDA spec and prevents
-		      users from specifying exact period/buffer sizes.
-		      (default = on)
-    snoop	- Enable/disable snooping (default = on)
 
     This module supports multiple cards and autoprobe.
 

trunk/Documentation/sound/alsa/HD-Audio-Controls.txt

@@ -98,19 +98,3 @@ Conexant codecs
 
 * Auto-Mute Mode
   See Reatek codecs.
-
-
-Analog codecs
---------------
-
-* Channel Mode
-  This is an enum control to change the surround-channel setup,
-  appears only when the surround channels are available.
-  It gives the number of channels to be used, "2ch", "4ch" and "6ch".
-  According to the configuration, this also controls the
-  jack-retasking of multi-I/O jacks.
-
-* Independent HP
-  When this enum control is enabled, the headphone output is routed
-  from an individual stream (the third PCM such as hw:0,2) instead of
-  the primary stream.

trunk/Documentation/sound/alsa/HD-Audio-Models.txt

@@ -29,6 +29,9 @@ ALC880
 
 ALC260
 ======
+  hp		HP machines
+  hp-3013	HP machines (3013-variant)
+  hp-dc7600	HP DC7600
   fujitsu	Fujitsu S7020
   acer		Acer TravelMate
   will		Will laptops (PB V7900)
@@ -43,10 +46,15 @@ ALC260
 ALC262
 ======
   fujitsu	Fujitsu Laptop
+  hp-bpc	HP xw4400/6400/8400/9400 laptops
+  hp-bpc-d7000	HP BPC D7000
+  hp-tc-t5735	HP Thin Client T5735
+  hp-rp5700	HP RP5700
   benq		Benq ED8
   benq-t31	Benq T31
   hippo		Hippo (ATI) with jack detection, Sony UX-90s
   hippo_1	Hippo (Benq) with jack detection
+  sony-assamd	Sony ASSAMD
   toshiba-s06	Toshiba S06
   toshiba-rx1	Toshiba RX1
   tyan		Tyan Thunder n6650W (S2915-E)
@@ -58,15 +66,43 @@ ALC262
 
 ALC267/268
 ==========
-  N/A
+  quanta-il1	Quanta IL1 mini-notebook
+  3stack	3-stack model
+  toshiba	Toshiba A205
+  acer		Acer laptops
+  acer-dmic	Acer laptops with digital-mic
+  acer-aspire	Acer Aspire One
+  dell		Dell OEM laptops (Vostro 1200)
+  zepto		Zepto laptops
+  test		for testing/debugging purpose, almost all controls can
+		adjusted.  Appearing only when compiled with
+		$CONFIG_SND_DEBUG=y
+  auto		auto-config reading BIOS (default)
 
 ALC269
 ======
+  basic		Basic preset
+  quanta	Quanta FL1
   laptop-amic	Laptops with analog-mic input
   laptop-dmic	Laptops with digital-mic input
+  fujitsu	FSC Amilo
+  lifebook	Fujitsu Lifebook S6420
+  auto		auto-config reading BIOS (default)
 
 ALC662/663/272
 ==============
+  3stack-dig	3-stack (2-channel) with SPDIF
+  3stack-6ch	 3-stack (6-channel)
+  3stack-6ch-dig 3-stack (6-channel) with SPDIF
+  5stack-dig	 5-stack with SPDIF
+  lenovo-101e	 Lenovo laptop
+  eeepc-p701	ASUS Eeepc P701
+  eeepc-ep20	ASUS Eeepc EP20
+  ecs		ECS/Foxconn mobo
+  m51va		ASUS M51VA
+  g71v		ASUS G71V
+  h13		ASUS H13
+  g50v		ASUS G50V
   asus-mode1	ASUS
   asus-mode2	ASUS
   asus-mode3	ASUS
@@ -75,10 +111,15 @@ ALC662/663/272
   asus-mode6	ASUS
   asus-mode7	ASUS
   asus-mode8	ASUS
+  dell		Dell with ALC272
+  dell-zm1	Dell ZM1 with ALC272
+  samsung-nc10	Samsung NC10 mini notebook
+  auto		auto-config reading BIOS (default)
 
 ALC680
 ======
-  N/A
+  base		Base model (ASUS NX90)
+  auto		auto-config reading BIOS (default)
 
 ALC882/883/885/888/889
 ======================
@@ -134,11 +175,28 @@ ALC882/883/885/888/889
 
 ALC861/660
 ==========
-  N/A
+  3stack	3-jack
+  3stack-dig	3-jack with SPDIF I/O
+  6stack-dig	6-jack with SPDIF I/O
+  3stack-660	3-jack (for ALC660)
+  uniwill-m31	Uniwill M31 laptop
+  toshiba	Toshiba laptop support
+  asus		Asus laptop support
+  asus-laptop	ASUS F2/F3 laptops
+  auto		auto-config reading BIOS (default)
 
 ALC861VD/660VD
 ==============
-  N/A
+  3stack	3-jack
+  3stack-dig	3-jack with SPDIF OUT
+  6stack-dig	6-jack with SPDIF OUT
+  3stack-660	3-jack (for ALC660VD)
+  3stack-660-digout 3-jack with SPDIF OUT (for ALC660VD)
+  lenovo	Lenovo 3000 C200
+  dallas	Dallas laptops
+  hp		HP TX1000
+  asus-v1s	ASUS V1Sn
+  auto		auto-config reading BIOS (default)
 
 CMI9880
 =======
@@ -231,6 +289,7 @@ Conexant 5051
   hp-dv6736	HP dv6736
   hp-f700	HP Compaq Presario F700
   ideapad	Lenovo IdeaPad laptop
+  lenovo-x200	Lenovo X200 laptop
   toshiba	Toshiba Satellite M300
 
 Conexant 5066

trunk/Documentation/sound/alsa/HD-Audio.txt

@@ -447,10 +447,7 @@ The file needs to have a line `[codec]`.  The next line should contain
 three numbers indicating the codec vendor-id (0x12345678 in the
 example), the codec subsystem-id (0xabcd1234) and the address (2) of
 the codec.  The rest patch entries are applied to this specified codec
-until another codec entry is given.  Passing 0 or a negative number to
-the first or the second value will make the check of the corresponding
-field be skipped.  It'll be useful for really broken devices that don't
-initialize SSID properly.
+until another codec entry is given.
 
 The `[model]` line allows to change the model name of the each codec.
 In the example above, it will be changed to model=auto.
@@ -494,7 +491,7 @@ Also, the codec chip name can be rewritten via `[chip_name]` line.
 The hd-audio driver reads the file via request_firmware().  Thus,
 a patch file has to be located on the appropriate firmware path,
 typically, /lib/firmware.  For example, when you pass the option
-`patch=hda-init.fw`, the file /lib/firmware/hda-init.fw must be
+`patch=hda-init.fw`, the file /lib/firmware/hda-init-fw must be
 present.
 
 The patch module option is specific to each card instance, and you
@@ -527,54 +524,6 @@ power-saving.  See /sys/module/snd_hda_intel/parameters/power_save to
 check the current value.  If it's non-zero, the feature is turned on.
 
 
-Tracepoints
-~~~~~~~~~~~
-The hd-audio driver gives a few basic tracepoints.
-`hda:hda_send_cmd` traces each CORB write while `hda:hda_get_response`
-traces the response from RIRB (only when read from the codec driver).
-`hda:hda_bus_reset` traces the bus-reset due to fatal error, etc,
-`hda:hda_unsol_event` traces the unsolicited events, and
-`hda:hda_power_down` and `hda:hda_power_up` trace the power down/up
-via power-saving behavior.
-
-Enabling all tracepoints can be done like
-------------------------------------------------------------------------
-  # echo 1 > /sys/kernel/debug/tracing/events/hda/enable
-------------------------------------------------------------------------
-then after some commands, you can traces from
-/sys/kernel/debug/tracing/trace file.  For example, when you want to
-trace what codec command is sent, enable the tracepoint like:
-------------------------------------------------------------------------
-  # cat /sys/kernel/debug/tracing/trace
-  # tracer: nop
-  #
-  #       TASK-PID    CPU#    TIMESTAMP  FUNCTION
-  #          | |       |          |         |
-         <...>-7807  [002] 105147.774889: hda_send_cmd: [0:0] val=e3a019
-         <...>-7807  [002] 105147.774893: hda_send_cmd: [0:0] val=e39019
-         <...>-7807  [002] 105147.999542: hda_send_cmd: [0:0] val=e3a01a
-         <...>-7807  [002] 105147.999543: hda_send_cmd: [0:0] val=e3901a
-         <...>-26764 [001] 349222.837143: hda_send_cmd: [0:0] val=e3a019
-         <...>-26764 [001] 349222.837148: hda_send_cmd: [0:0] val=e39019
-         <...>-26764 [001] 349223.058539: hda_send_cmd: [0:0] val=e3a01a
-         <...>-26764 [001] 349223.058541: hda_send_cmd: [0:0] val=e3901a
-------------------------------------------------------------------------
-Here `[0:0]` indicates the card number and the codec address, and
-`val` shows the value sent to the codec, respectively.  The value is
-a packed value, and you can decode it via hda-decode-verb program
-included in hda-emu package below.  For example, the value e3a019 is
-to set the left output-amp value to 25.
-------------------------------------------------------------------------
-  % hda-decode-verb 0xe3a019
-  raw value = 0x00e3a019
-  cid = 0, nid = 0x0e, verb = 0x3a0, parm = 0x19
-  raw value: verb = 0x3a0, parm = 0x19
-  verbname = set_amp_gain_mute
-  amp raw val = 0xa019
-  output, left, idx=0, mute=0, val=25
-------------------------------------------------------------------------
-
-
 Development Tree
 ~~~~~~~~~~~~~~~~
 The latest development codes for HD-audio are found on sound git tree:

trunk/MAINTAINERS

@@ -5990,7 +5990,7 @@ M:	Jaroslav Kysela <perex@perex.cz>
 M:	Takashi Iwai <tiwai@suse.de>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 W:	http://www.alsa-project.org/
-T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound.git
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6.git
 T:	git git://git.alsa-project.org/alsa-kernel.git
 S:	Maintained
 F:	Documentation/sound/

trunk/include/linux/input.h

@@ -814,7 +814,6 @@ struct input_keymap_entry {
 #define SW_KEYPAD_SLIDE		0x0a  /* set = keypad slide out */
 #define SW_FRONT_PROXIMITY	0x0b  /* set = front proximity sensor active */
 #define SW_ROTATE_LOCK		0x0c  /* set = rotate locked/disabled */
-#define SW_LINEIN_INSERT	0x0d  /* set = inserted */
 #define SW_MAX			0x0f
 #define SW_CNT			(SW_MAX+1)
 

trunk/include/linux/usb/ch9.h

@@ -377,23 +377,18 @@ struct usb_endpoint_descriptor {
 #define USB_ENDPOINT_NUMBER_MASK	0x0f	/* in bEndpointAddress */
 #define USB_ENDPOINT_DIR_MASK		0x80
 
-#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
-#define USB_ENDPOINT_XFER_CONTROL	0
-#define USB_ENDPOINT_XFER_ISOC		1
-#define USB_ENDPOINT_XFER_BULK		2
-#define USB_ENDPOINT_XFER_INT		3
-#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
-
 #define USB_ENDPOINT_SYNCTYPE		0x0c
 #define USB_ENDPOINT_SYNC_NONE		(0 << 2)
 #define USB_ENDPOINT_SYNC_ASYNC		(1 << 2)
 #define USB_ENDPOINT_SYNC_ADAPTIVE	(2 << 2)
 #define USB_ENDPOINT_SYNC_SYNC		(3 << 2)
 
-#define USB_ENDPOINT_USAGE_MASK		0x30
-#define USB_ENDPOINT_USAGE_DATA		0x00
-#define USB_ENDPOINT_USAGE_FEEDBACK	0x10
-#define USB_ENDPOINT_USAGE_IMPLICIT_FB	0x20	/* Implicit feedback Data endpoint */
+#define USB_ENDPOINT_XFERTYPE_MASK	0x03	/* in bmAttributes */
+#define USB_ENDPOINT_XFER_CONTROL	0
+#define USB_ENDPOINT_XFER_ISOC		1
+#define USB_ENDPOINT_XFER_BULK		2
+#define USB_ENDPOINT_XFER_INT		3
+#define USB_ENDPOINT_MAX_ADJUSTABLE	0x80
 
 /*-------------------------------------------------------------------------*/
 

trunk/include/sound/asound.h

@@ -706,7 +706,7 @@ struct snd_timer_tread {
  *                                                                          *
  ****************************************************************************/
 
-#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 7)
+#define SNDRV_CTL_VERSION		SNDRV_PROTOCOL_VERSION(2, 0, 6)
 
 struct snd_ctl_card_info {
 	int card;			/* card number */
@@ -803,8 +803,6 @@ struct snd_ctl_elem_info {
 			unsigned int items;	/* R: number of items */
 			unsigned int item;	/* W: item number */
 			char name[64];		/* R: value name */
-			__u64 names_ptr;	/* W: names list (ELEM_ADD only) */
-			unsigned int names_length;
 		} enumerated;
 		unsigned char reserved[128];
 	} value;

trunk/include/sound/initval.h

@@ -62,7 +62,7 @@ static int snd_legacy_find_free_irq(int *irq_table)
 {
 	while (*irq_table != -1) {
 		if (!request_irq(*irq_table, snd_legacy_empty_irq_handler,
-				 IRQF_PROBE_SHARED, "ALSA Test IRQ",
+				 IRQF_DISABLED | IRQF_PROBE_SHARED, "ALSA Test IRQ",
 				 (void *) irq_table)) {
 			free_irq(*irq_table, (void *) irq_table);
 			return *irq_table;

trunk/include/sound/jack.h

@@ -42,7 +42,6 @@ enum snd_jack_types {
 	SND_JACK_MECHANICAL	= 0x0008, /* If detected separately */
 	SND_JACK_VIDEOOUT	= 0x0010,
 	SND_JACK_AVOUT		= SND_JACK_LINEOUT | SND_JACK_VIDEOOUT,
-	SND_JACK_LINEIN		= 0x0020,
 
 	/* Kept separate from switches to facilitate implementation */
 	SND_JACK_BTN_0		= 0x4000,