ARM: S3C2440: move mach-s3c2440/* into mach-s3c24xx/

This patch moves S3C2440 stuff into mach-s3c24xx/ directory
so that we can merge the s3c24 series' directories to the
just one mach-s3c24xx/ directory.

And this patch is including following.
- re-ordered alphabetically by option text at Kconfig and Makefile

Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/mach-s3c2440/Kconfig

@@ -2,35 +2,6 @@
 #
 # Licensed under GPLv2
 
-config CPU_S3C2440
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select S3C2440_DMA if S3C2410_DMA
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2440 Samsung Mobile CPU based systems.
-
-config CPU_S3C2442
-	bool
-	select CPU_ARM920T
-	select S3C2410_CLOCK
-	select S3C2410_PM if PM
-	select CPU_S3C244X
-	select CPU_LLSERIAL_S3C2440
-	help
-	  Support for S3C2442 Samsung Mobile CPU based systems.
-
-config CPU_S3C244X
-	bool
-	depends on CPU_S3C2440 || CPU_S3C2442
-	help
-	  Support for S3C2440 and S3C2442 Samsung Mobile CPU based systems.
-
-
-
 config S3C2440_CPUFREQ
 	bool "S3C2440/S3C2442 CPU Frequency scaling support"
 	depends on CPU_FREQ_S3C24XX && (CPU_S3C2440 || CPU_S3C2442)
@@ -64,139 +35,3 @@ config S3C2440_PLL_16934400
 	default y if CPU_FREQ_S3C24XX_PLL
 	help
 	  PLL tables for S3C2440 or S3C2442 CPUs with 16.934MHz crystals.
-
-config S3C2440_DMA
-	bool
-	depends on CPU_S3C2440
-	help
-	  Support for S3C2440 specific DMA code5A
-
-menu "S3C2440 and S3C2442 Machines"
-
-config MACH_ANUBIS
-	bool "Simtec Electronics ANUBIS"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select HAVE_PATA_PLATFORM
-	select S3C24XX_GPIO_EXTRA64
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here if you are using the Simtec Electronics ANUBIS
-	  development system
-
-config MACH_NEO1973_GTA02
-	bool "Openmoko GTA02 / Freerunner phone"
-	select CPU_S3C2442
-	select MFD_PCF50633
-	select PCF50633_GPIO
-	select I2C
-	select POWER_SUPPLY
-	select MACH_NEO1973
-	select S3C2410_PWM
-	select S3C_DEV_USB_HOST
-	help
-	   Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
-
-config MACH_OSIRIS
-	bool "Simtec IM2440D20 (OSIRIS) module"
-	select CPU_S3C2440
-	select S3C24XX_DCLK
-	select PM_SIMTEC if PM
-	select S3C24XX_GPIO_EXTRA128
-	select S3C2440_XTAL_12000000
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the Simtec IM2440D20 module, also
-	  known as the Osiris.
-
-config MACH_OSIRIS_DVS
-	tristate "Simtec IM2440D20 (OSIRIS) Dynamic Voltage Scaling driver"
-	depends on MACH_OSIRIS
-	select TPS65010
-	help
-	  Say Y/M here if you want to have dynamic voltage scaling support
-	  on the Simtec IM2440D20 (OSIRIS) module via the TPS65011.
-
-	  The DVS driver alters the voltage supplied to the ARM core
-	  depending on the frequency it is running at. The driver itself
-	  does not do any of the frequency alteration, which is left up
-	  to the cpufreq driver.
-
-config MACH_RX3715
-	bool "HP iPAQ rx3715"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select PM_H1940 if PM
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the HP iPAQ rx3715.
-
-config ARCH_S3C2440
-	bool "SMDK2440"
-	select CPU_S3C2440
-	select S3C2440_XTAL_16934400
-	select MACH_SMDK
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the SMDK2440.
-
-config MACH_NEXCODER_2440
- 	bool "NexVision NEXCODER 2440 Light Board"
- 	select CPU_S3C2440
-	select S3C2440_XTAL_12000000
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
- 	  Say Y here if you are using the Nex Vision NEXCODER 2440 Light Board
-
-config SMDK2440_CPU2440
-	bool "SMDK2440 with S3C2440 CPU module"
-	default y if ARCH_S3C2440
-	select S3C2440_XTAL_16934400
-	select CPU_S3C2440
-
-config SMDK2440_CPU2442
-	bool "SMDM2440 with S3C2442 CPU module"
-	select CPU_S3C2442
-
-config MACH_AT2440EVB
-	bool "Avantech AT2440EVB development board"
-	select CPU_S3C2440
-	select S3C_DEV_USB_HOST
-	select S3C_DEV_NAND
-	help
-	  Say Y here if you are using the AT2440EVB development board
-
-config MACH_MINI2440
-	bool "MINI2440 development board"
-	select CPU_S3C2440
-	select EEPROM_AT24
-	select NEW_LEDS
-	select LEDS_CLASS
-	select LEDS_TRIGGER
-	select LEDS_TRIGGER_BACKLIGHT
-	select S3C_DEV_NAND
-	select S3C_DEV_USB_HOST
-	help
-	  Say Y here to select support for the MINI2440. Is a 10cm x 10cm board
-	  available via various sources. It can come with a 3.5" or 7" touch LCD.
-
-config MACH_RX1950
-	bool "HP iPAQ rx1950"
-	select CPU_S3C2442
-	select S3C24XX_DCLK
-	select PM_H1940 if PM
-	select I2C
-	select S3C2410_PWM
-	select S3C_DEV_NAND
-	select S3C2410_IOTIMING if S3C2440_CPUFREQ
-	select S3C2440_XTAL_16934400
-	help
-	   Say Y here if you're using HP iPAQ rx1950
-
-endmenu

arch/arm/mach-s3c2440/Makefile

@@ -9,33 +9,9 @@ obj-m				:=
 obj-n				:=
 obj-				:=
 
-obj-$(CONFIG_CPU_S3C2440)	+= s3c2440.o dsc.o
-obj-$(CONFIG_CPU_S3C2442)	+= s3c2442.o
+obj-$(CONFIG_CPU_S3C2440)	+= dsc.o
 
-obj-$(CONFIG_CPU_S3C2440)	+= irq.o
-obj-$(CONFIG_CPU_S3C2440)	+= clock.o
-obj-$(CONFIG_S3C2440_DMA)	+= dma.o
-
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-irq.o
-obj-$(CONFIG_CPU_S3C244X)	+= s3c244x-clock.o
 obj-$(CONFIG_S3C2440_CPUFREQ)	+= s3c2440-cpufreq.o
 
 obj-$(CONFIG_S3C2440_PLL_12000000) += s3c2440-pll-12000000.o
 obj-$(CONFIG_S3C2440_PLL_16934400) += s3c2440-pll-16934400.o
-
-# Machine support
-
-obj-$(CONFIG_MACH_ANUBIS)	+= mach-anubis.o
-obj-$(CONFIG_MACH_OSIRIS)	+= mach-osiris.o
-obj-$(CONFIG_MACH_RX3715)	+= mach-rx3715.o
-obj-$(CONFIG_ARCH_S3C2440)	+= mach-smdk2440.o
-obj-$(CONFIG_MACH_NEXCODER_2440) += mach-nexcoder.o
-obj-$(CONFIG_MACH_AT2440EVB) += mach-at2440evb.o
-obj-$(CONFIG_MACH_MINI2440) += mach-mini2440.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-obj-$(CONFIG_MACH_RX1950) += mach-rx1950.o
-
-# extra machine support
-
-obj-$(CONFIG_MACH_OSIRIS_DVS)	+= mach-osiris-dvs.o