---

yaml
---
r: 236180
b: refs/heads/master
c: 61044c4
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 16d691b60ea94be876cc12a62faa839803184a5e
+refs/heads/master: 61044c4cef8b0380e8ec4b06eff24884e4c7d9b9

trunk/drivers/staging/brcm80211/brcmsmac/wlc_ampdu.c

@@ -1178,8 +1178,7 @@ wlc_ampdu_dotxstatus_complete(struct ampdu_info *ampdu, struct scb *scb,
 	wlc_send_q(wlc, wlc->active_queue);
 
 	/* update rate state */
-	if (WLANTSEL_ENAB(wlc))
-		antselid = wlc_antsel_antsel2id(wlc->asi, mimoantsel);
+	antselid = wlc_antsel_antsel2id(wlc->asi, mimoantsel);
 
 	wlc_txfifo_complete(wlc, queue, ampdu->txpkt_weight);
 }

trunk/drivers/staging/brcm80211/brcmsmac/wlc_antsel.c

@@ -16,8 +16,6 @@
 
 #include <wlc_cfg.h>
 
-#ifdef WLANTSEL
-
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
@@ -327,5 +325,3 @@ static int wlc_antsel_cfgupd(struct antsel_info *asi, wlc_antselcfg_t *antsel)
 
 	return 0;
 }
-
-#endif				/* WLANTSEL */

trunk/drivers/staging/brcm80211/brcmsmac/wlc_bmac.c

@@ -2582,39 +2582,39 @@ static void wlc_gpio_init(struct wlc_info *wlc)
 	gc = gm = 0;
 
 	/* Allocate GPIOs for mimo antenna diversity feature */
-	if (WLANTSEL_ENAB(wlc)) {
-		if (wlc_hw->antsel_type == ANTSEL_2x3) {
-			/* Enable antenna diversity, use 2x3 mode */
-			wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN,
-				     MHF3_ANTSEL_EN, WLC_BAND_ALL);
-			wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE,
-				     MHF3_ANTSEL_MODE, WLC_BAND_ALL);
-
-			/* init superswitch control */
-			wlc_phy_antsel_init(wlc_hw->band->pi, false);
-
-		} else if (wlc_hw->antsel_type == ANTSEL_2x4) {
-			ASSERT((gm & BOARD_GPIO_12) == 0);
-			gm |= gc |= (BOARD_GPIO_12 | BOARD_GPIO_13);
-			/* The board itself is powered by these GPIOs (when not sending pattern)
-			 * So set them high
-			 */
-			OR_REG(osh, &regs->psm_gpio_oe,
-			       (BOARD_GPIO_12 | BOARD_GPIO_13));
-			OR_REG(osh, &regs->psm_gpio_out,
-			       (BOARD_GPIO_12 | BOARD_GPIO_13));
-
-			/* Enable antenna diversity, use 2x4 mode */
-			wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN,
-				     MHF3_ANTSEL_EN, WLC_BAND_ALL);
-			wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE, 0,
-				     WLC_BAND_ALL);
-
-			/* Configure the desired clock to be 4Mhz */
-			wlc_bmac_write_shm(wlc_hw, M_ANTSEL_CLKDIV,
-					   ANTSEL_CLKDIV_4MHZ);
-		}
+	if (wlc_hw->antsel_type == ANTSEL_2x3) {
+		/* Enable antenna diversity, use 2x3 mode */
+		wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN,
+			     MHF3_ANTSEL_EN, WLC_BAND_ALL);
+		wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE,
+			     MHF3_ANTSEL_MODE, WLC_BAND_ALL);
+
+		/* init superswitch control */
+		wlc_phy_antsel_init(wlc_hw->band->pi, false);
+
+	} else if (wlc_hw->antsel_type == ANTSEL_2x4) {
+		ASSERT((gm & BOARD_GPIO_12) == 0);
+		gm |= gc |= (BOARD_GPIO_12 | BOARD_GPIO_13);
+		/*
+		 * The board itself is powered by these GPIOs
+		 * (when not sending pattern) so set them high
+		 */
+		OR_REG(osh, &regs->psm_gpio_oe,
+		       (BOARD_GPIO_12 | BOARD_GPIO_13));
+		OR_REG(osh, &regs->psm_gpio_out,
+		       (BOARD_GPIO_12 | BOARD_GPIO_13));
+
+		/* Enable antenna diversity, use 2x4 mode */
+		wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_EN,
+			     MHF3_ANTSEL_EN, WLC_BAND_ALL);
+		wlc_bmac_mhf(wlc_hw, MHF3, MHF3_ANTSEL_MODE, 0,
+			     WLC_BAND_ALL);
+
+		/* Configure the desired clock to be 4Mhz */
+		wlc_bmac_write_shm(wlc_hw, M_ANTSEL_CLKDIV,
+				   ANTSEL_CLKDIV_4MHZ);
 	}
+
 	/* gpio 9 controls the PA.  ucode is responsible for wiggling out and oe */
 	if (wlc_hw->boardflags & BFL_PACTRL)
 		gm |= gc |= BOARD_GPIO_PACTRL;

trunk/drivers/staging/brcm80211/brcmsmac/wlc_cfg.h

@@ -69,10 +69,6 @@
 #define SSLPNCONF	SSLPNPHY_DEFAULT
 #endif
 
-#define BAND2G
-#define BAND5G
-#define WLANTSEL	1
-
 /********************************************************************
  * Phy/Core Configuration.  Defines macros to to check core phy/rev *
  * compile-time configuration.  Defines default core support.       *
@@ -281,6 +277,4 @@
 #define WLBANDINITDATA(_data)	_data
 #define WLBANDINITFN(_fn)	_fn
 
-#define WLANTSEL_ENAB(wlc)	1
-
 #endif				/* _wlc_cfg_h_ */

trunk/drivers/staging/brcm80211/brcmsmac/wlc_mac80211.c

@@ -861,8 +861,7 @@ void wlc_set_chanspec(struct wlc_info *wlc, chanspec_t chanspec)
 
 	/* init antenna selection */
 	if (CHSPEC_WLC_BW(old_chanspec) != CHSPEC_WLC_BW(chanspec)) {
-		if (WLANTSEL_ENAB(wlc))
-			wlc_antsel_init(wlc->asi);
+		wlc_antsel_init(wlc->asi);
 
 		/* Fix the hardware rateset based on bw.
 		 * Mainly add MCS32 for 40Mhz, remove MCS 32 for 20Mhz
@@ -1308,8 +1307,7 @@ static void WLBANDINITFN(wlc_bsinit) (struct wlc_info *wlc)
 	wlc_ucode_mac_upd(wlc);
 
 	/* init antenna selection */
-	if (WLANTSEL_ENAB(wlc))
-		wlc_antsel_init(wlc->asi);
+	wlc_antsel_init(wlc->asi);
 
 }
 
@@ -2003,15 +2001,13 @@ void *wlc_attach(void *wl, u16 vendor, u16 device, uint unit, bool piomode,
 	/* initialize radio_mpc_disable according to wlc->mpc */
 	wlc_radio_mpc_upd(wlc);
 
-	if (WLANTSEL_ENAB(wlc)) {
-		if ((wlc->pub->sih->chip) == BCM43235_CHIP_ID) {
-			if ((getintvar(wlc->pub->vars, "aa2g") == 7) ||
-			    (getintvar(wlc->pub->vars, "aa5g") == 7)) {
-				wlc_bmac_antsel_set(wlc->hw, 1);
-			}
-		} else {
-			wlc_bmac_antsel_set(wlc->hw, wlc->asi->antsel_avail);
+	if ((wlc->pub->sih->chip) == BCM43235_CHIP_ID) {
+		if ((getintvar(wlc->pub->vars, "aa2g") == 7) ||
+		    (getintvar(wlc->pub->vars, "aa5g") == 7)) {
+			wlc_bmac_antsel_set(wlc->hw, 1);
 		}
+	} else {
+		wlc_bmac_antsel_set(wlc->hw, wlc->asi->antsel_avail);
 	}
 
 	if (perr)
@@ -5753,11 +5749,9 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
 	u32 rate_val[2];
 	bool hwtkmic = false;
 	u16 mimo_ctlchbw = PHY_TXC1_BW_20MHZ;
-#ifdef WLANTSEL
 #define ANTCFG_NONE 0xFF
 	u8 antcfg = ANTCFG_NONE;
 	u8 fbantcfg = ANTCFG_NONE;
-#endif
 	uint phyctl1_stf = 0;
 	u16 durid = 0;
 	struct ieee80211_tx_rate *txrate[2];
@@ -5891,8 +5885,7 @@ wlc_d11hdrs_mac80211(struct wlc_info *wlc, struct ieee80211_hw *hw,
 			ASSERT(RSPEC_ACTIVE(rspec[k]));
 			rspec[k] = WLC_RATE_1M;
 		} else {
-			if (WLANTSEL_ENAB(wlc) &&
-			    !is_multicast_ether_addr(h->addr1)) {
+			if (!is_multicast_ether_addr(h->addr1)) {
 				/* set tx antenna config */
 				wlc_antsel_antcfg_get(wlc->asi, false, false, 0,
 						      0, &antcfg, &fbantcfg);