---

yaml --- r: 322595 b: refs/heads/master c: 749c59f h: refs/heads/master i: 322593: d0342e6 322591: 21c4313 v: v3
git-mirror · Sep 4, 2012 · de6fe94 · de6fe94
1 parent 257af8d
commit de6fe94
Show file tree

Hide file tree

Showing 119 changed files with 244 additions and 763 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 44346cfe4d5e1c78279c11f36fd4a854e0ec456a
+refs/heads/master: 749c59fd15b2c18dd6c15c353a899fb6ac49b865
diff --git a/trunk/Documentation/ABI/testing/sysfs-bus-pci b/trunk/Documentation/ABI/testing/sysfs-bus-pci
@@ -210,15 +210,3 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
-
-What:		/sys/bus/pci/devices/.../d3cold_allowed
-Date:		July 2012
-Contact:	Huang Ying <ying.huang@intel.com>
-Description:
-		d3cold_allowed is bit to control whether the corresponding PCI
-		device can be put into D3Cold state.  If it is cleared, the
-		device will never be put into D3Cold state.  If it is set, the
-		device may be put into D3Cold state if other requirements are
-		satisfied too.  Reading this attribute will show the current
-		value of d3cold_allowed bit.  Writing this attribute will set
-		the value of d3cold_allowed bit.
diff --git a/trunk/Documentation/feature-removal-schedule.txt b/trunk/Documentation/feature-removal-schedule.txt
@@ -579,7 +579,7 @@ Why:	KVM tracepoints provide mostly equivalent information in a much more
 ----------------------------
 
 What:	at91-mci driver ("CONFIG_MMC_AT91")
-When:	3.8
+When:	3.7
 Why:	There are two mci drivers: at91-mci and atmel-mci. The PDC support
 	was added to atmel-mci as a first step to support more chips.
 	Then at91-mci was kept only for old IP versions (on at91rm9200 and

diff --git a/trunk/Documentation/i2c/busses/i2c-i801 b/trunk/Documentation/i2c/busses/i2c-i801
@@ -21,7 +21,6 @@ Supported adapters:
   * Intel DH89xxCC (PCH)
   * Intel Panther Point (PCH)
   * Intel Lynx Point (PCH)
-  * Intel Lynx Point-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 6
 SUBLEVEL = 0
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc4
 NAME = Saber-toothed Squirrel
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/arm/Kconfig b/trunk/arch/arm/Kconfig
@@ -6,7 +6,7 @@ config ARM
 	select HAVE_DMA_API_DEBUG
 	select HAVE_IDE if PCI || ISA || PCMCIA
 	select HAVE_DMA_ATTRS
-	select HAVE_DMA_CONTIGUOUS if MMU
+	select HAVE_DMA_CONTIGUOUS if (CPU_V6 || CPU_V6K || CPU_V7)
 	select HAVE_MEMBLOCK
 	select RTC_LIB
 	select SYS_SUPPORTS_APM_EMULATION

diff --git a/trunk/arch/arm/boot/dts/at91sam9g25ek.dts b/trunk/arch/arm/boot/dts/at91sam9g25ek.dts
@@ -15,7 +15,7 @@
 	compatible = "atmel,at91sam9g25ek", "atmel,at91sam9x5ek", "atmel,at91sam9x5", "atmel,at91sam9";
 
 	chosen {
-		bootargs = "console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
+		bootargs = "128M console=ttyS0,115200 root=/dev/mtdblock1 rw rootfstype=ubifs ubi.mtd=1 root=ubi0:rootfs";
 	};
 
 	ahb {

diff --git a/trunk/arch/arm/configs/armadillo800eva_defconfig b/trunk/arch/arm/configs/armadillo800eva_defconfig
@@ -33,7 +33,7 @@ CONFIG_AEABI=y
 CONFIG_FORCE_MAX_ZONEORDER=13
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096 rw"
+CONFIG_CMDLINE="console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp nfsroot=,rsize=4096,wsize=4096"
 CONFIG_CMDLINE_FORCE=y
 CONFIG_KEXEC=y
 CONFIG_VFP=y

diff --git a/trunk/arch/arm/include/asm/dma-mapping.h b/trunk/arch/arm/include/asm/dma-mapping.h
@@ -202,13 +202,6 @@ static inline void dma_free_writecombine(struct device *dev, size_t size,
 	return dma_free_attrs(dev, size, cpu_addr, dma_handle, &attrs);
 }
 
-/*
- * This can be called during early boot to increase the size of the atomic
- * coherent DMA pool above the default value of 256KiB. It must be called
- * before postcore_initcall.
- */
-extern void __init init_dma_coherent_pool_size(unsigned long size);
-
 /*
  * This can be called during boot to increase the size of the consistent
  * DMA region above it's default value of 2MB. It must be called before the

diff --git a/trunk/arch/arm/mach-at91/at91rm9200_time.c b/trunk/arch/arm/mach-at91/at91rm9200_time.c
@@ -197,7 +197,7 @@ void __init at91rm9200_timer_init(void)
 	at91_st_read(AT91_ST_SR);
 
 	/* Make IRQs happen for the system timer */
-	setup_irq(NR_IRQS_LEGACY + AT91_ID_SYS, &at91rm9200_timer_irq);
+	setup_irq(AT91_ID_SYS, &at91rm9200_timer_irq);
 
 	/* The 32KiHz "Slow Clock" (tick every 30517.58 nanoseconds) is used
 	 * directly for the clocksource and all clockevents, after adjusting

diff --git a/trunk/arch/arm/mach-at91/at91sam9260_devices.c b/trunk/arch/arm/mach-at91/at91sam9260_devices.c
@@ -726,8 +726,6 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
 	},
 };
 
@@ -746,12 +744,10 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9260_rtt_device.num_resources = 3;
+	at91sam9260_rtt_device.num_resources = 2;
 	rtt_resources[1].start = AT91SAM9260_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
-	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
-	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

diff --git a/trunk/arch/arm/mach-at91/at91sam9261_devices.c b/trunk/arch/arm/mach-at91/at91sam9261_devices.c
@@ -609,8 +609,6 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -628,12 +626,10 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9261_rtt_device.num_resources = 3;
+	at91sam9261_rtt_device.num_resources = 2;
 	rtt_resources[1].start = AT91SAM9261_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
-	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
-	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

diff --git a/trunk/arch/arm/mach-at91/at91sam9263_devices.c b/trunk/arch/arm/mach-at91/at91sam9263_devices.c
@@ -990,8 +990,6 @@ static struct resource rtt0_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1008,8 +1006,6 @@ static struct resource rtt1_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1031,14 +1027,14 @@ static void __init at91_add_device_rtt_rtc(void)
 		 * The second resource is needed only for the chosen RTT:
 		 * GPBR will serve as the storage for RTC time offset
 		 */
-		at91sam9263_rtt0_device.num_resources = 3;
+		at91sam9263_rtt0_device.num_resources = 2;
 		at91sam9263_rtt1_device.num_resources = 1;
 		pdev = &at91sam9263_rtt0_device;
 		r = rtt0_resources;
 		break;
 	case 1:
 		at91sam9263_rtt0_device.num_resources = 1;
-		at91sam9263_rtt1_device.num_resources = 3;
+		at91sam9263_rtt1_device.num_resources = 2;
 		pdev = &at91sam9263_rtt1_device;
 		r = rtt1_resources;
 		break;
@@ -1051,8 +1047,6 @@ static void __init at91_add_device_rtt_rtc(void)
 	pdev->name = "rtc-at91sam9";
 	r[1].start = AT91SAM9263_BASE_GPBR + 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	r[1].end = r[1].start + 3;
-	r[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
-	r[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

diff --git a/trunk/arch/arm/mach-at91/at91sam9g45_devices.c b/trunk/arch/arm/mach-at91/at91sam9g45_devices.c
@@ -1293,8 +1293,6 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -1312,12 +1310,10 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9g45_rtt_device.num_resources = 3;
+	at91sam9g45_rtt_device.num_resources = 2;
 	rtt_resources[1].start = AT91SAM9G45_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
-	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
-	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

diff --git a/trunk/arch/arm/mach-at91/at91sam9rl_devices.c b/trunk/arch/arm/mach-at91/at91sam9rl_devices.c
@@ -688,8 +688,6 @@ static struct resource rtt_resources[] = {
 		.flags	= IORESOURCE_MEM,
 	}, {
 		.flags	= IORESOURCE_MEM,
-	}, {
-		.flags  = IORESOURCE_IRQ,
 	}
 };
 
@@ -707,12 +705,10 @@ static void __init at91_add_device_rtt_rtc(void)
 	 * The second resource is needed:
 	 * GPBR will serve as the storage for RTC time offset
 	 */
-	at91sam9rl_rtt_device.num_resources = 3;
+	at91sam9rl_rtt_device.num_resources = 2;
 	rtt_resources[1].start = AT91SAM9RL_BASE_GPBR +
 				 4 * CONFIG_RTC_DRV_AT91SAM9_GPBR;
 	rtt_resources[1].end = rtt_resources[1].start + 3;
-	rtt_resources[2].start = NR_IRQS_LEGACY + AT91_ID_SYS;
-	rtt_resources[2].end = NR_IRQS_LEGACY + AT91_ID_SYS;
 }
 #else
 static void __init at91_add_device_rtt_rtc(void)

diff --git a/trunk/arch/arm/mach-at91/clock.c b/trunk/arch/arm/mach-at91/clock.c
@@ -63,12 +63,6 @@ EXPORT_SYMBOL_GPL(at91_pmc_base);
 
 #define cpu_has_300M_plla()	(cpu_is_at91sam9g10())
 
-#define cpu_has_240M_plla()	(cpu_is_at91sam9261() \
-				|| cpu_is_at91sam9263() \
-				|| cpu_is_at91sam9rl())
-
-#define cpu_has_210M_plla()	(cpu_is_at91sam9260())
-
 #define cpu_has_pllb()		(!(cpu_is_at91sam9rl() \
 				|| cpu_is_at91sam9g45() \
 				|| cpu_is_at91sam9x5() \
@@ -712,12 +706,6 @@ static int __init at91_pmc_init(unsigned long main_clock)
 	} else if (cpu_has_800M_plla()) {
 		if (plla.rate_hz > 800000000)
 			pll_overclock = true;
-	} else if (cpu_has_240M_plla()) {
-		if (plla.rate_hz > 240000000)
-			pll_overclock = true;
-	} else if (cpu_has_210M_plla()) {
-		if (plla.rate_hz > 210000000)
-			pll_overclock = true;
 	} else {
 		if (plla.rate_hz > 209000000)
 			pll_overclock = true;

diff --git a/trunk/arch/arm/mach-gemini/irq.c b/trunk/arch/arm/mach-gemini/irq.c
@@ -17,7 +17,6 @@
 #include <linux/sched.h>
 #include <asm/irq.h>
 #include <asm/mach/irq.h>
-#include <asm/system_misc.h>
 #include <mach/hardware.h>
 
 #define IRQ_SOURCE(base_addr)	(base_addr + 0x00)

diff --git a/trunk/arch/arm/mach-kirkwood/common.c b/trunk/arch/arm/mach-kirkwood/common.c
@@ -517,13 +517,6 @@ void __init kirkwood_wdt_init(void)
 void __init kirkwood_init_early(void)
 {
 	orion_time_set_base(TIMER_VIRT_BASE);
-
-	/*
-	 * Some Kirkwood devices allocate their coherent buffers from atomic
-	 * context. Increase size of atomic coherent pool to make sure such
-	 * the allocations won't fail.
-	 */
-	init_dma_coherent_pool_size(SZ_1M);
 }
 
 int kirkwood_tclk;

diff --git a/trunk/arch/arm/mach-kirkwood/db88f6281-bp-setup.c b/trunk/arch/arm/mach-kirkwood/db88f6281-bp-setup.c
@@ -10,7 +10,6 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/sizes.h>
 #include <linux/platform_device.h>
 #include <linux/mtd/partitions.h>
 #include <linux/ata_platform.h>

diff --git a/trunk/arch/arm/mach-shmobile/board-armadillo800eva.c b/trunk/arch/arm/mach-shmobile/board-armadillo800eva.c
@@ -520,14 +520,13 @@ static struct platform_device hdmi_lcdc_device = {
 };
 
 /* GPIO KEY */
-#define GPIO_KEY(c, g, d, ...) \
-	{ .code = c, .gpio = g, .desc = d, .active_low = 1, __VA_ARGS__ }
+#define GPIO_KEY(c, g, d) { .code = c, .gpio = g, .desc = d, .active_low = 1 }
 
 static struct gpio_keys_button gpio_buttons[] = {
-	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW3", .wakeup = 1),
-	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW4"),
-	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW5"),
-	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW6"),
+	GPIO_KEY(KEY_POWER,	GPIO_PORT99,	"SW1"),
+	GPIO_KEY(KEY_BACK,	GPIO_PORT100,	"SW2"),
+	GPIO_KEY(KEY_MENU,	GPIO_PORT97,	"SW3"),
+	GPIO_KEY(KEY_HOME,	GPIO_PORT98,	"SW4"),
 };
 
 static struct gpio_keys_platform_data gpio_key_info = {
@@ -902,8 +901,8 @@ static struct platform_device *eva_devices[] __initdata = {
 	&camera_device,
 	&ceu0_device,
 	&fsi_device,
-	&fsi_wm8978_device,
 	&fsi_hdmi_device,
+	&fsi_wm8978_device,
 };
 
 static void __init eva_clock_init(void)

diff --git a/trunk/arch/arm/mach-shmobile/board-mackerel.c b/trunk/arch/arm/mach-shmobile/board-mackerel.c
@@ -695,7 +695,6 @@ static struct platform_device usbhs0_device = {
  *  - J30 "open"
  *  - modify usbhs1_get_id() USBHS_HOST -> USBHS_GADGET
  *  - add .get_vbus = usbhs_get_vbus in usbhs1_private
- *  - check usbhs0_device(pio)/usbhs1_device(irq) order in mackerel_devices.
  */
 #define IRQ8 evt2irq(0x0300)
 #define USB_PHY_MODE		(1 << 4)
@@ -1326,8 +1325,8 @@ static struct platform_device *mackerel_devices[] __initdata = {
 	&nor_flash_device,
 	&smc911x_device,
 	&lcdc_device,
-	&usbhs0_device,
 	&usbhs1_device,
+	&usbhs0_device,
 	&leds_device,
 	&fsi_device,
 	&fsi_ak4643_device,

diff --git a/trunk/arch/arm/mach-shmobile/board-marzen.c b/trunk/arch/arm/mach-shmobile/board-marzen.c
@@ -67,7 +67,7 @@ static struct smsc911x_platform_config smsc911x_platdata = {
 
 static struct platform_device eth_device = {
 	.name		= "smsc911x",
-	.id		= -1,
+	.id		= 0,
 	.dev  = {
 		.platform_data = &smsc911x_platdata,
 	},

diff --git a/trunk/arch/arm/mach-shmobile/intc-sh73a0.c b/trunk/arch/arm/mach-shmobile/intc-sh73a0.c
@@ -259,9 +259,9 @@ static int sh73a0_set_wake(struct irq_data *data, unsigned int on)
 	return 0; /* always allow wakeup */
 }
 
-#define RELOC_BASE 0x1200
+#define RELOC_BASE 0x1000
 
-/* INTCA IRQ pins at INTCS + RELOC_BASE to make space for GIC+INTC handling */
+/* INTCA IRQ pins at INTCS + 0x1000 to make space for GIC+INTC handling */
 #define INTCS_VECT_RELOC(n, vect) INTCS_VECT((n), (vect) + RELOC_BASE)
 
 INTC_IRQ_PINS_32(intca_irq_pins, 0xe6900000,