Merge branch 'from-linus' into upstream

Documentation/serial/driver

@@ -214,12 +214,13 @@ hardware.
 	The interaction of the iflag bits is as follows (parity error
 	given as an example):
 	Parity error	INPCK	IGNPAR
-	None		n/a	n/a	character received
-	Yes		n/a	0	character discarded
-	Yes		0	1	character received, marked as
+	n/a		0	n/a	character received, marked as
 					TTY_NORMAL
-	Yes		1	1	character received, marked as
+	None		1	n/a	character received, marked as
+					TTY_NORMAL
+	Yes		1	0	character received, marked as
 					TTY_PARITY
+	Yes		1	1	character discarded
 
 	Other flags may be used (eg, xon/xoff characters) if your
 	hardware supports hardware "soft" flow control.

MAINTAINERS

@@ -565,7 +565,7 @@ BROADBAND PROCESSOR ARCHITECTURE
 P:	Arnd Bergmann
 M:	arnd@arndb.de
 L:	linuxppc-dev@ozlabs.org
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
 S:	Supported
 
 BTTV VIDEO4LINUX DRIVER
@@ -1716,7 +1716,7 @@ M:	paulus@au.ibm.com
 P:	Anton Blanchard
 M:	anton@samba.org
 M:	anton@au.ibm.com
-W:	http://linuxppc64.org
+W:	http://www.penguinppc.org/ppc64/
 L:	linuxppc-dev@ozlabs.org
 S:	Supported
 
@@ -1899,6 +1899,12 @@ M:	James.Bottomley@HansenPartnership.com
 L:	linux-scsi@vger.kernel.org
 S:	Maintained
 
+NETEM NETWORK EMULATOR
+P:	Stephen Hemminger
+M:	shemminger@osdl.org
+L:	netem@osdl.org
+S:	Maintained
+
 NETFILTER/IPTABLES/IPCHAINS
 P:	Rusty Russell
 P:	Marc Boucher

arch/arm/mach-ixp23xx/core.c

@@ -178,8 +178,12 @@ static int ixp23xx_irq_set_type(unsigned int irq, unsigned int type)
 
 static void ixp23xx_irq_mask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
 
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg &= ~(1 << (irq % 32));
 }
 
@@ -199,17 +203,25 @@ static void ixp23xx_irq_ack(unsigned int irq)
  */
 static void ixp23xx_irq_level_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
 
 	ixp23xx_irq_ack(irq);
 
+	if (irq >= 56)
+		irq += 8;
+
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }
 
 static void ixp23xx_irq_edge_unmask(unsigned int irq)
 {
-	volatile unsigned long *intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
+	volatile unsigned long *intr_reg;
+
+	if (irq >= 56)
+		irq += 8;
 
+	intr_reg = IXP23XX_INTR_EN1 + (irq / 32);
 	*intr_reg |= (1 << (irq % 32));
 }
 

arch/arm/mm/mm-armv.c

@@ -376,7 +376,7 @@ void __init build_mem_type_table(void)
 		ecc_mask = 0;
 	}
 
-	if (cpu_arch <= CPU_ARCH_ARMv5TEJ) {
+	if (cpu_arch <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale()) {
 		for (i = 0; i < ARRAY_SIZE(mem_types); i++) {
 			if (mem_types[i].prot_l1)
 				mem_types[i].prot_l1 |= PMD_BIT4;
@@ -631,7 +631,7 @@ void setup_mm_for_reboot(char mode)
 		pgd = init_mm.pgd;
 
 	base_pmdval = PMD_SECT_AP_WRITE | PMD_SECT_AP_READ | PMD_TYPE_SECT;
-	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ)
+	if (cpu_architecture() <= CPU_ARCH_ARMv5TEJ && !cpu_is_xscale())
 		base_pmdval |= PMD_BIT4;
 
 	for (i = 0; i < FIRST_USER_PGD_NR + USER_PTRS_PER_PGD; i++, pgd++) {

arch/arm/mm/proc-xsc3.S

@@ -427,12 +427,13 @@ __xsc3_setup:
 #endif
 	mcr	p15, 0, r0, c1, c0, 1		@ set auxiliary control reg
 	mrc	p15, 0, r0, c1, c0, 0		@ get control register
-	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	bic	r0, r0, #0x0002			@ .... .... .... ..A.
 	orr	r0, r0, #0x0005			@ .... .... .... .C.M
 #if BTB_ENABLE
+	bic	r0, r0, #0x0200			@ .... ..R. .... ....
 	orr	r0, r0, #0x3900			@ ..VI Z..S .... ....
 #else
+	bic	r0, r0, #0x0a00			@ .... Z.R. .... ....
 	orr	r0, r0, #0x3100			@ ..VI ...S .... ....
 #endif
 #if L2_CACHE_ENABLE

arch/i386/kernel/acpi/boot.c

@@ -1066,14 +1066,6 @@ static struct dmi_system_id __initdata acpi_dmi_table[] = {
 		     DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 360"),
 		     },
 	 },
-	{
-	 .callback = disable_acpi_pci,
-	 .ident = "HP xw9300",
-	 .matches = {
-		    DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"),
-		    DMI_MATCH(DMI_PRODUCT_NAME, "HP xw9300 Workstation"),
-		    },
-	},
 	{}
 };
 

arch/i386/kernel/syscall_table.S

@@ -315,3 +315,4 @@ ENTRY(sys_call_table)
 	.long sys_splice
 	.long sys_sync_file_range
 	.long sys_tee			/* 315 */
+	.long sys_vmsplice

arch/i386/mach-generic/probe.c

@@ -93,9 +93,11 @@ int __init mps_oem_check(struct mp_config_table *mpc, char *oem, char *productid
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->mps_oem_check(mpc,oem,productid)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	} 
@@ -107,9 +109,11 @@ int __init acpi_madt_oem_check(char *oem_id, char *oem_table_id)
 	int i;
 	for (i = 0; apic_probe[i]; ++i) { 
 		if (apic_probe[i]->acpi_madt_oem_check(oem_id, oem_table_id)) { 
-			genapic = apic_probe[i];
-			printk(KERN_INFO "Switched to APIC driver `%s'.\n", 
-			       genapic->name);
+			if (!cmdline_apic) {
+				genapic = apic_probe[i];
+				printk(KERN_INFO "Switched to APIC driver `%s'.\n",
+				       genapic->name);
+			}
 			return 1;
 		} 
 	}