---

yaml
---
r: 98113
b: refs/heads/master
c: a167607
h: refs/heads/master
i:
  98111: e3476f6
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 7775c9753b94fe429dc4323360d6502c95e0dd6e
+refs/heads/master: a1676072558854b95336c8f7db76b0504e909a0a

trunk/.gitignore

@@ -52,7 +52,6 @@ series
 
 # cscope files
 cscope.*
-ncscope.*
 
 *.orig
 *~

trunk/Documentation/ABI/testing/sysfs-class-bdi

@@ -14,10 +14,6 @@ MAJOR:MINOR
 	non-block filesystems which provide their own BDI, such as NFS
 	and FUSE.
 
-MAJOR:MINOR-fuseblk
-
-	Value of st_dev on fuseblk filesystems.
-
 default
 
 	The default backing dev, used for non-block device backed

trunk/Documentation/DocBook/kernel-locking.tmpl

@@ -703,31 +703,6 @@
 </sect1>
 </chapter>
 
-<chapter id="trylock-functions">
- <title>The trylock Functions</title>
-  <para>
-   There are functions that try to acquire a lock only once and immediately
-   return a value telling about success or failure to acquire the lock.
-   They can be used if you need no access to the data protected with the lock
-   when some other thread is holding the lock. You should acquire the lock
-   later if you then need access to the data protected with the lock.
-  </para>
-
-  <para>
-    <function>spin_trylock()</function> does not spin but returns non-zero if
-    it acquires the spinlock on the first try or 0 if not. This function can
-    be used in all contexts like <function>spin_lock</function>: you must have
-    disabled the contexts that might interrupt you and acquire the spin lock.
-  </para>
-
-  <para>
-    <function>mutex_trylock()</function> does not suspend your task
-    but returns non-zero if it could lock the mutex on the first try
-    or 0 if not. This function cannot be safely used in hardware or software
-    interrupt contexts despite not sleeping.
-  </para>
-</chapter>
-
   <chapter id="Examples">
    <title>Common Examples</title>
     <para>

trunk/Documentation/SubmittingPatches

@@ -327,52 +327,6 @@ Some people also put extra tags at the end.  They'll just be ignored for
 now, but you can do this to mark internal company procedures or just
 point out some special detail about the sign-off. 
 
-If you are a subsystem or branch maintainer, sometimes you need to slightly
-modify patches you receive in order to merge them, because the code is not
-exactly the same in your tree and the submitters'. If you stick strictly to
-rule (c), you should ask the submitter to rediff, but this is a totally
-counter-productive waste of time and energy. Rule (b) allows you to adjust
-the code, but then it is very impolite to change one submitter's code and
-make him endorse your bugs. To solve this problem, it is recommended that
-you add a line between the last Signed-off-by header and yours, indicating
-the nature of your changes. While there is nothing mandatory about this, it
-seems like prepending the description with your mail and/or name, all
-enclosed in square brackets, is noticeable enough to make it obvious that
-you are responsible for last-minute changes. Example :
-
-	Signed-off-by: Random J Developer <random@developer.example.org>
-	[lucky@maintainer.example.org: struct foo moved from foo.c to foo.h]
-	Signed-off-by: Lucky K Maintainer <lucky@maintainer.example.org>
-
-This practise is particularly helpful if you maintain a stable branch and
-want at the same time to credit the author, track changes, merge the fix,
-and protect the submitter from complaints. Note that under no circumstances
-can you change the author's identity (the From header), as it is the one
-which appears in the changelog.
-
-Special note to back-porters: It seems to be a common and useful practise
-to insert an indication of the origin of a patch at the top of the commit
-message (just after the subject line) to facilitate tracking. For instance,
-here's what we see in 2.6-stable :
-
-    Date:   Tue May 13 19:10:30 2008 +0000
-
-        SCSI: libiscsi regression in 2.6.25: fix nop timer handling
-
-        commit 4cf1043593db6a337f10e006c23c69e5fc93e722 upstream
-
-And here's what appears in 2.4 :
-
-    Date:   Tue May 13 22:12:27 2008 +0200
-
-        wireless, airo: waitbusy() won't delay
-
-        [backport of 2.6 commit b7acbdfbd1f277c1eb23f344f899cfa4cd0bf36a]
-
-Whatever the format, this information provides a valuable help to people
-tracking your trees, and to people trying to trouble-shoot bugs in your
-tree.
-
 
 13) When to use Acked-by: and Cc:
 

trunk/Documentation/cciss.txt

@@ -21,11 +21,6 @@ This driver is known to work with the following cards:
 	* SA E200
 	* SA E200i
 	* SA E500
-	* SA P212
-	* SA P410
-	* SA P410i
-	* SA P411
-	* SA P812
 
 Detecting drive failures:
 -------------------------

trunk/Documentation/cpu-freq/governors.txt

@@ -129,6 +129,14 @@ to its default value of '80' it means that between the checking
 intervals the CPU needs to be on average more than 80% in use to then
 decide that the CPU frequency needs to be increased.  
 
+sampling_down_factor: this parameter controls the rate that the CPU
+makes a decision on when to decrease the frequency.  When set to its
+default value of '5' it means that at 1/5 the sampling_rate the kernel
+makes a decision to lower the frequency.  Five "lower rate" decisions
+have to be made in a row before the CPU frequency is actually lower.
+If set to '1' then the frequency decreases as quickly as it increases,
+if set to '2' it decreases at half the rate of the increase.
+
 ignore_nice_load: this parameter takes a value of '0' or '1'. When
 set to '0' (its default), all processes are counted towards the
 'cpu utilisation' value.  When set to '1', the processes that are

trunk/Documentation/cpusets.txt

@@ -199,7 +199,7 @@ using the sched_setaffinity, mbind and set_mempolicy system calls.
 The following rules apply to each cpuset:
 
  - Its CPUs and Memory Nodes must be a subset of its parents.
- - It can't be marked exclusive unless its parent is.
+ - It can only be marked exclusive if its parent is.
  - If its cpu or memory is exclusive, they may not overlap any sibling.
 
 These rules, and the natural hierarchy of cpusets, enable efficient
@@ -345,7 +345,7 @@ is modified to perform an inline check for this PF_SPREAD_PAGE task
 flag, and if set, a call to a new routine cpuset_mem_spread_node()
 returns the node to prefer for the allocation.
 
-Similarly, setting 'memory_spread_slab' turns on the flag
+Similarly, setting 'memory_spread_cache' turns on the flag
 PF_SPREAD_SLAB, and appropriately marked slab caches will allocate
 pages from the node returned by cpuset_mem_spread_node().
 
@@ -709,10 +709,7 @@ Now you want to do something with this cpuset.
 
 In this directory you can find several files:
 # ls
-cpu_exclusive  memory_migrate      mems                      tasks
-cpus           memory_pressure     notify_on_release
-mem_exclusive  memory_spread_page  sched_load_balance
-mem_hardwall   memory_spread_slab  sched_relax_domain_level
+cpus  cpu_exclusive  mems  mem_exclusive mem_hardwall  tasks
 
 Reading them will give you information about the state of this cpuset:
 the CPUs and Memory Nodes it can use, the processes that are using

trunk/Documentation/filesystems/ext4.txt

@@ -139,16 +139,8 @@ commit=nrsec	(*)	Ext4 can be told to sync all its data and metadata
 			Setting it to very large values will improve
 			performance.
 
-barrier=<0|1(*)>	This enables/disables the use of write barriers in
-			the jbd code.  barrier=0 disables, barrier=1 enables.
-			This also requires an IO stack which can support
-			barriers, and if jbd gets an error on a barrier
-			write, it will disable again with a warning.
-			Write barriers enforce proper on-disk ordering
-			of journal commits, making volatile disk write caches
-			safe to use, at some performance penalty.  If
-			your disks are battery-backed in one way or another,
-			disabling barriers may safely improve performance.
+barrier=1		This enables/disables barriers.  barrier=0 disables
+			it, barrier=1 enables it.
 
 orlov		(*)	This enables the new Orlov block allocator. It is
 			enabled by default.

trunk/Documentation/kernel-doc-nano-HOWTO.txt

@@ -1,105 +1,6 @@
 kernel-doc nano-HOWTO
 =====================
 
-How to format kernel-doc comments
----------------------------------
-
-In order to provide embedded, 'C' friendly, easy to maintain,
-but consistent and extractable documentation of the functions and
-data structures in the Linux kernel, the Linux kernel has adopted
-a consistent style for documenting functions and their parameters,
-and structures and their members.
-
-The format for this documentation is called the kernel-doc format.
-It is documented in this Documentation/kernel-doc-nano-HOWTO.txt file.
-
-This style embeds the documentation within the source files, using
-a few simple conventions.  The scripts/kernel-doc perl script, some
-SGML templates in Documentation/DocBook, and other tools understand
-these conventions, and are used to extract this embedded documentation
-into various documents.
-
-In order to provide good documentation of kernel functions and data
-structures, please use the following conventions to format your
-kernel-doc comments in Linux kernel source.
-
-We definitely need kernel-doc formatted documentation for functions
-that are exported to loadable modules using EXPORT_SYMBOL.
-
-We also look to provide kernel-doc formatted documentation for
-functions externally visible to other kernel files (not marked
-"static").
-
-We also recommend providing kernel-doc formatted documentation
-for private (file "static") routines, for consistency of kernel
-source code layout.  But this is lower priority and at the
-discretion of the MAINTAINER of that kernel source file.
-
-Data structures visible in kernel include files should also be
-documented using kernel-doc formatted comments.
-
-The opening comment mark "/**" is reserved for kernel-doc comments.
-Only comments so marked will be considered by the kernel-doc scripts,
-and any comment so marked must be in kernel-doc format.  Do not use
-"/**" to be begin a comment block unless the comment block contains
-kernel-doc formatted comments.  The closing comment marker for
-kernel-doc comments can be either "*/" or "**/".
-
-Kernel-doc comments should be placed just before the function
-or data structure being described.
-
-Example kernel-doc function comment:
-
-/**
- * foobar() - short function description of foobar
- * @arg1:	Describe the first argument to foobar.
- * @arg2:	Describe the second argument to foobar.
- *		One can provide multiple line descriptions
- *		for arguments.
- *
- * A longer description, with more discussion of the function foobar()
- * that might be useful to those using or modifying it.  Begins with
- * empty comment line, and may include additional embedded empty
- * comment lines.
- *
- * The longer description can have multiple paragraphs.
- **/
-
-The first line, with the short description, must be on a single line.
-
-The @argument descriptions must begin on the very next line following
-this opening short function description line, with no intervening
-empty comment lines.
-
-Example kernel-doc data structure comment.
-
-/**
- * struct blah - the basic blah structure
- * @mem1:	describe the first member of struct blah
- * @mem2:	describe the second member of struct blah,
- *		perhaps with more lines and words.
- *
- * Longer description of this structure.
- **/
-
-The kernel-doc function comments describe each parameter to the
-function, in order, with the @name lines.
-
-The kernel-doc data structure comments describe each structure member
-in the data structure, with the @name lines.
-
-The longer description formatting is "reflowed", losing your line
-breaks.  So presenting carefully formatted lists within these
-descriptions won't work so well; derived documentation will lose
-the formatting.
-
-See the section below "How to add extractable documentation to your
-source files" for more details and notes on how to format kernel-doc
-comments.
-
-Components of the kernel-doc system
------------------------------------
-
 Many places in the source tree have extractable documentation in the
 form of block comments above functions.  The components of this system
 are:

trunk/Documentation/kernel-docs.txt

@@ -715,14 +715,14 @@
 
      * Name: "Gary's Encyclopedia - The Linux Kernel"
        Author: Gary (I suppose...).
-       URL: http://slencyclopedia.berlios.de/index.html
-       Keywords: linux, community, everything!
+       URL: http://www.lisoleg.net/cgi-bin/lisoleg.pl?view=kernel.htm
+       Keywords: links, not found here?.
        Description: Gary's Encyclopedia exists to allow the rapid finding
        of documentation and other information of interest to GNU/Linux
        users. It has about 4000 links to external pages in 150 major
        categories. This link is for kernel-specific links, documents,
-       sites...  This list is now hosted by developer.Berlios.de,
-       but seems not to have been updated since sometime in 1999.
+       sites... Look there if you could not find here what you were
+       looking for.
 
      * Name: "The home page of Linux-MM"
        Author: The Linux-MM team.

trunk/Documentation/kobject.txt

@@ -305,7 +305,7 @@ should not be manipulated by any other user.
 
 A kset keeps its children in a standard kernel linked list.  Kobjects point
 back to their containing kset via their kset field. In almost all cases,
-the kobjects belonging to a kset have that kset (or, strictly, its embedded
+the kobjects belonging to a ket have that kset (or, strictly, its embedded
 kobject) in their parent.
 
 As a kset contains a kobject within it, it should always be dynamically

trunk/Documentation/laptops/thinkpad-acpi.txt

@@ -503,7 +503,7 @@ generate input device EV_KEY events.
 In addition to the EV_KEY events, thinkpad-acpi may also issue EV_SW
 events for switches:
 
-SW_RFKILL_ALL	T60 and later hardare rfkill rocker switch
+SW_RADIO	T60 and later hardare rfkill rocker switch
 SW_TABLET_MODE	Tablet ThinkPads HKEY events 0x5009 and 0x500A
 
 Non hot-key ACPI HKEY event map: