---

yaml
---
r: 349003
b: refs/heads/master
c: ed06ef3
h: refs/heads/master
i:
  349001: b10da6b
  348999: 56c58f2
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: acb8fb04b74e1c26117b89945dc058b52b28ccb9
+refs/heads/master: ed06ef318a7ddde3823966f808f39b515eae1862

trunk/Documentation/filesystems/f2fs.txt

@@ -175,9 +175,9 @@ consists of multiple segments as described below.
                                             align with the zone size <-|
                  |-> align with the segment size
      _________________________________________________________________________
-    |            |            |    Node     |   Segment   |   Segment  |      |
-    | Superblock | Checkpoint |   Address   |    Info.    |   Summary  | Main |
-    |    (SB)    |   (CP)     | Table (NAT) | Table (SIT) | Area (SSA) |      |
+    |            |            |   Segment   |    Node     |   Segment  |      |
+    | Superblock | Checkpoint |    Info.    |   Address   |   Summary  | Main |
+    |    (SB)    |   (CP)     | Table (SIT) | Table (NAT) | Area (SSA) |      |
     |____________|_____2______|______N______|______N______|______N_____|__N___|
                                                                        .      .
                                                              .                .
@@ -200,14 +200,14 @@ consists of multiple segments as described below.
  : It contains file system information, bitmaps for valid NAT/SIT sets, orphan
    inode lists, and summary entries of current active segments.
 
-- Node Address Table (NAT)
- : It is composed of a block address table for all the node blocks stored in
-   Main area.
-
 - Segment Information Table (SIT)
  : It contains segment information such as valid block count and bitmap for the
    validity of all the blocks.
 
+- Node Address Table (NAT)
+ : It is composed of a block address table for all the node blocks stored in
+   Main area.
+
 - Segment Summary Area (SSA)
  : It contains summary entries which contains the owner information of all the
    data and node blocks stored in Main area.
@@ -236,13 +236,13 @@ For file system consistency, each CP points to which NAT and SIT copies are
 valid, as shown as below.
 
   +--------+----------+---------+
-  |   CP   |    NAT   |   SIT   |
+  |   CP   |    SIT   |   NAT   |
   +--------+----------+---------+
   .         .          .          .
   .            .              .              .
   .               .                 .                 .
   +-------+-------+--------+--------+--------+--------+
-  | CP #0 | CP #1 | NAT #0 | NAT #1 | SIT #0 | SIT #1 |
+  | CP #0 | CP #1 | SIT #0 | SIT #1 | NAT #0 | NAT #1 |
   +-------+-------+--------+--------+--------+--------+
      |             ^                          ^
      |             |                          |

trunk/MAINTAINERS

@@ -228,7 +228,7 @@ S:	Maintained
 F:	drivers/platform/x86/acerhdf.c
 
 ACER WMI LAPTOP EXTRAS
-M:	Joey Lee <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/acer-wmi.c
@@ -648,7 +648,7 @@ F:	arch/arm/
 
 ARM SUB-ARCHITECTURES
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	MAINTAINED
+S:	Maintained
 F:	arch/arm/mach-*/
 F:	arch/arm/plat-*/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc.git
@@ -1351,6 +1351,14 @@ W:	http://wireless.kernel.org/en/users/Drivers/ath9k
 S:	Supported
 F:	drivers/net/wireless/ath/ath9k/
 
+WILOCITY WIL6210 WIRELESS DRIVER
+M:	Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
+L:	linux-wireless@vger.kernel.org
+L:	wil6210@qca.qualcomm.com
+S:	Supported
+W:	http://wireless.kernel.org/en/users/Drivers/wil6210
+F:	drivers/net/wireless/ath/wil6210/
+
 CARL9170 LINUX COMMUNITY WIRELESS DRIVER
 M:	Christian Lamparter <chunkeey@googlemail.com>
 L:	linux-wireless@vger.kernel.org
@@ -1964,9 +1972,9 @@ S:	Maintained
 F:	drivers/usb/host/ohci-ep93xx.c
 
 CIRRUS LOGIC CS4270 SOUND DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
-S:	Supported
+S:	Odd Fixes
 F:	sound/soc/codecs/cs4270*
 
 CLEANCACHE API
@@ -3183,9 +3191,9 @@ F:	include/uapi/video/
 F:	include/uapi/linux/fb.h
 
 FREESCALE DIU FRAMEBUFFER DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linux-fbdev@vger.kernel.org
-S:	Supported
+S:	Maintained
 F:	drivers/video/fsl-diu-fb.*
 
 FREESCALE DMA DRIVER
@@ -3220,9 +3228,8 @@ F:	drivers/net/ethernet/freescale/fs_enet/
 F:	include/linux/fs_enet_pd.h
 
 FREESCALE QUICC ENGINE LIBRARY
-M:	Timur Tabi <timur@freescale.com>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Orphan
 F:	arch/powerpc/sysdev/qe_lib/
 F:	arch/powerpc/include/asm/*qe.h
 
@@ -3241,16 +3248,16 @@ S:	Maintained
 F:	drivers/net/ethernet/freescale/ucc_geth*
 
 FREESCALE QUICC ENGINE UCC UART DRIVER
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	drivers/tty/serial/ucc_uart.c
 
 FREESCALE SOC SOUND DRIVERS
-M:	Timur Tabi <timur@freescale.com>
+M:	Timur Tabi <timur@tabi.org>
 L:	alsa-devel@alsa-project.org (moderated for non-subscribers)
 L:	linuxppc-dev@lists.ozlabs.org
-S:	Supported
+S:	Maintained
 F:	sound/soc/fsl/fsl*
 F:	sound/soc/fsl/mpc8610_hpcd.c
 
@@ -5077,7 +5084,7 @@ S:	Maintained
 F:	drivers/media/radio/radio-mr800.c
 
 MSI LAPTOP SUPPORT
-M:	"Lee, Chun-Yi" <jlee@novell.com>
+M:	"Lee, Chun-Yi" <jlee@suse.com>
 L:	platform-driver-x86@vger.kernel.org
 S:	Maintained
 F:	drivers/platform/x86/msi-laptop.c
@@ -5507,8 +5514,7 @@ M:	Benoît Cousson <b-cousson@ti.com>
 M:	Paul Walmsley <paul@pwsan.com>
 L:	linux-omap@vger.kernel.org
 S:	Maintained
-F:	arch/arm/mach-omap2/omap_hwmod.c
-F:	arch/arm/plat-omap/include/plat/omap_hwmod.h
+F:	arch/arm/mach-omap2/omap_hwmod.*
 
 OMAP HWMOD DATA FOR OMAP4-BASED DEVICES
 M:	Benoît Cousson <b-cousson@ti.com>
@@ -7334,7 +7340,7 @@ S:	Odd Fixes
 F:	drivers/staging/speakup/
 
 STAGING - TI DSP BRIDGE DRIVERS
-M:	Omar Ramirez Luna <omar.ramirez@ti.com>
+M:	Omar Ramirez Luna <omar.ramirez@copitl.com>
 S:	Odd Fixes
 F:	drivers/staging/tidspbridge/
 
@@ -8526,7 +8532,7 @@ F:	Documentation/x86/
 F:	arch/x86/
 
 X86 PLATFORM DRIVERS
-M:	Matthew Garrett <mjg@redhat.com>
+M:	Matthew Garrett <matthew.garrett@nebula.com>
 L:	platform-driver-x86@vger.kernel.org
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86.git
 S:	Maintained

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 8
 SUBLEVEL = 0
-EXTRAVERSION = -rc2
+EXTRAVERSION = -rc4
 NAME = Terrified Chipmunk
 
 # *DOCUMENTATION*

trunk/arch/arm/boot/dts/Makefile

@@ -155,6 +155,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \
 dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
 
 targets += dtbs
+targets += $(dtb-y)
 endif
 
 # *.dtb used to be generated in the directory above. Clean out the

trunk/arch/arm/boot/dts/at91sam9260.dtsi

@@ -306,6 +306,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 16 0x1 0x0	/* PB16 periph A */
+							 1 17 0x1 0x0	/* PB17 periph A */
+							 1 18 0x1 0x0>;	/* PB18 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 19 0x1 0x0	/* PB19 periph A */
+							 1 20 0x1 0x0	/* PB20 periph A */
+							 1 21 0x1 0x0>;	/* PB21 periph A */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -450,6 +466,8 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfffbc000 0x4000>;
 				interrupts = <14 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 

trunk/arch/arm/boot/dts/at91sam9263.dtsi

@@ -271,6 +271,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<1 0 0x2 0x0	/* PB0 periph B */
+							 1 1 0x2 0x0	/* PB1 periph B */
+							 1 2 0x2 0x0>;	/* PB2 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<1 3 0x2 0x0	/* PB3 periph B */
+							 1 4 0x2 0x0	/* PB4 periph B */
+							 1 5 0x2 0x0>;	/* PB5 periph B */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<1 6 0x1 0x0	/* PB6 periph A */
+							 1 7 0x1 0x0	/* PB7 periph A */
+							 1 8 0x1 0x0>;	/* PB8 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<1 9 0x1 0x0	/* PB9 periph A */
+							 1 10 0x1 0x0	/* PB10 periph A */
+							 1 11 0x1 0x0>;	/* PB11 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -368,13 +400,17 @@
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff98000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
 			ssc1: ssc@fff9c000 {
 				compatible = "atmel,at91rm9200-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 

trunk/arch/arm/boot/dts/at91sam9g45.dtsi

@@ -290,6 +290,38 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<3 0 0x1 0x0	/* PD0 periph A */
+							 3 1 0x1 0x0	/* PD1 periph A */
+							 3 2 0x1 0x0>;	/* PD2 periph A */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<3 3 0x1 0x0	/* PD3 periph A */
+							 3 4 0x1 0x0	/* PD4 periph A */
+							 3 5 0x1 0x0>;	/* PD5 periph A */
+					};
+				};
+
+				ssc1 {
+					pinctrl_ssc1_tx: ssc1_tx-0 {
+						atmel,pins =
+							<3 10 0x1 0x0	/* PD10 periph A */
+							 3 11 0x1 0x0	/* PD11 periph A */
+							 3 12 0x1 0x0>;	/* PD12 periph A */
+					};
+
+					pinctrl_ssc1_rx: ssc1_rx-0 {
+						atmel,pins =
+							<3 13 0x1 0x0	/* PD13 periph A */
+							 3 14 0x1 0x0	/* PD14 periph A */
+							 3 15 0x1 0x0>;	/* PD15 periph A */
+					};
+				};
+
 				pioA: gpio@fffff200 {
 					compatible = "atmel,at91rm9200-gpio";
 					reg = <0xfffff200 0x200>;
@@ -425,13 +457,17 @@
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfff9c000 0x4000>;
 				interrupts = <16 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
 				status = "disabled";
 			};
 
 			ssc1: ssc@fffa0000 {
 				compatible = "atmel,at91sam9g45-ssc";
 				reg = <0xfffa0000 0x4000>;
 				interrupts = <17 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc1_tx &pinctrl_ssc1_rx>;
 				status = "disabled";
 			};
 

trunk/arch/arm/boot/dts/at91sam9n12.dtsi

@@ -28,6 +28,7 @@
 		tcb1 = &tcb1;
 		i2c0 = &i2c0;
 		i2c1 = &i2c1;
+		ssc0 = &ssc0;
 	};
 	cpus {
 		cpu@0 {
@@ -244,6 +245,22 @@
 					};
 				};
 
+				ssc0 {
+					pinctrl_ssc0_tx: ssc0_tx-0 {
+						atmel,pins =
+							<0 24 0x2 0x0	/* PA24 periph B */
+							 0 25 0x2 0x0	/* PA25 periph B */
+							 0 26 0x2 0x0>;	/* PA26 periph B */
+					};
+
+					pinctrl_ssc0_rx: ssc0_rx-0 {
+						atmel,pins =
+							<0 27 0x2 0x0	/* PA27 periph B */
+							 0 28 0x2 0x0	/* PA28 periph B */
+							 0 29 0x2 0x0>;	/* PA29 periph B */
+					};
+				};
+
 				pioA: gpio@fffff400 {
 					compatible = "atmel,at91sam9x5-gpio", "atmel,at91rm9200-gpio";
 					reg = <0xfffff400 0x200>;
@@ -294,6 +311,15 @@
 				status = "disabled";
 			};
 
+			ssc0: ssc@f0010000 {
+				compatible = "atmel,at91sam9g45-ssc";
+				reg = <0xf0010000 0x4000>;
+				interrupts = <28 4 5>;
+				pinctrl-names = "default";
+				pinctrl-0 = <&pinctrl_ssc0_tx &pinctrl_ssc0_rx>;
+				status = "disabled";
+			};
+
 			usart0: serial@f801c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xf801c000 0x4000>;