---

yaml
---
r: 323992
b: refs/heads/master
c: 050902c
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 3b29b03a462346473b7d0e6c6013fe093a4ac0d1
+refs/heads/master: 050902c011712ad4703038fa4489ec4edd87d396

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -210,15 +210,3 @@ Users:
 		firmware assigned instance number of the PCI
 		device that can help in understanding the firmware
 		intended order of the PCI device.
-
-What:		/sys/bus/pci/devices/.../d3cold_allowed
-Date:		July 2012
-Contact:	Huang Ying <ying.huang@intel.com>
-Description:
-		d3cold_allowed is bit to control whether the corresponding PCI
-		device can be put into D3Cold state.  If it is cleared, the
-		device will never be put into D3Cold state.  If it is set, the
-		device may be put into D3Cold state if other requirements are
-		satisfied too.  Reading this attribute will show the current
-		value of d3cold_allowed bit.  Writing this attribute will set
-		the value of d3cold_allowed bit.

trunk/Documentation/ABI/testing/sysfs-class-regulator

@@ -349,24 +349,3 @@ Description:
 
 		This will be one of the same strings reported by
 		the "state" attribute.
-
-What:		/sys/class/regulator/.../bypass
-Date:		September 2012
-KernelVersion:	3.7
-Contact:	Mark Brown <broonie@opensource.wolfsonmicro.com>
-Description:
-		Some regulator directories will contain a field called
-		bypass.  This indicates if the device is in bypass mode.
-
-		This will be one of the following strings:
-
-		'enabled'
-		'disabled'
-		'unknown'
-
-		'enabled' means the regulator is in bypass mode.
-
-		'disabled' means that the regulator is regulating.
-
-		'unknown' means software cannot determine the state, or
-		the reported state is invalid.

trunk/Documentation/ABI/testing/sysfs-driver-wacom

@@ -1,16 +1,3 @@
-WWhat:		/sys/class/hidraw/hidraw*/device/oled*_img
-Date:		June 2012
-Contact:	linux-bluetooth@vger.kernel.org
-Description:
-		The /sys/class/hidraw/hidraw*/device/oled*_img files control
-		OLED mocro displays on Intuos4 Wireless tablet. Accepted image
-		has to contain 256 bytes (64x32 px 1 bit colour). The format
-		is the same as PBM image 62x32px without header (64 bits per
-		horizontal line, 32 lines). An example of setting OLED No. 0:
-		dd bs=256 count=1 if=img_file of=[path to oled0_img]/oled0_img
-		The attribute is read only and no local copy of the image is
-		stored.
-
 What:		/sys/class/hidraw/hidraw*/device/speed
 Date:		April 2010
 Kernel Version:	2.6.35

trunk/Documentation/RCU/checklist.txt

@@ -310,12 +310,6 @@ over a rather long period of time, but improvements are always welcome!
 	code under the influence of preempt_disable(), you instead
 	need to use synchronize_irq() or synchronize_sched().
 
-	This same limitation also applies to synchronize_rcu_bh()
-	and synchronize_srcu(), as well as to the asynchronous and
-	expedited forms of the three primitives, namely call_rcu(),
-	call_rcu_bh(), call_srcu(), synchronize_rcu_expedited(),
-	synchronize_rcu_bh_expedited(), and synchronize_srcu_expedited().
-
 12.	Any lock acquired by an RCU callback must be acquired elsewhere
 	with softirq disabled, e.g., via spin_lock_irqsave(),
 	spin_lock_bh(), etc.  Failing to disable irq on a given

trunk/Documentation/RCU/stallwarn.txt

@@ -99,7 +99,7 @@ In kernels with CONFIG_RCU_FAST_NO_HZ, even more information is
 printed:
 
 	INFO: rcu_preempt detected stall on CPU
-	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer not pending
+	0: (64628 ticks this GP) idle=dd5/3fffffffffffffff/0 drain=0 . timer=-1
 	   (t=65000 jiffies)
 
 The "(64628 ticks this GP)" indicates that this CPU has taken more
@@ -116,13 +116,13 @@ number between the two "/"s is the value of the nesting, which will
 be a small positive number if in the idle loop and a very large positive
 number (as shown above) otherwise.
 
-For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the CPU is
-not in the process of trying to force itself into dyntick-idle state, the
-"." indicates that the CPU has not given up forcing RCU into dyntick-idle
-mode (it would be "H" otherwise), and the "timer not pending" indicates
-that the CPU has not recently forced RCU into dyntick-idle mode (it
-would otherwise indicate the number of microseconds remaining in this
-forced state).
+For CONFIG_RCU_FAST_NO_HZ kernels, the "drain=0" indicates that the
+CPU is not in the process of trying to force itself into dyntick-idle
+state, the "." indicates that the CPU has not given up forcing RCU
+into dyntick-idle mode (it would be "H" otherwise), and the "timer=-1"
+indicates that the CPU has not recented forced RCU into dyntick-idle
+mode (it would otherwise indicate the number of microseconds remaining
+in this forced state).
 
 
 Multiple Warnings From One Stall

trunk/Documentation/RCU/trace.txt

@@ -333,23 +333,23 @@ o	Each element of the form "1/1 0:127 ^0" represents one struct
 The output of "cat rcu/rcu_pending" looks as follows:
 
 rcu_sched:
-  0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nn=146741
-  1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nn=155792
-  2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nn=136629
-  3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nn=137723
-  4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nn=123110
-  5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nn=137456
-  6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nn=120834
-  7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nn=144888
+  0 np=255892 qsp=53936 rpq=85 cbr=0 cng=14417 gpc=10033 gps=24320 nf=6445 nn=146741
+  1 np=261224 qsp=54638 rpq=33 cbr=0 cng=25723 gpc=16310 gps=2849 nf=5912 nn=155792
+  2 np=237496 qsp=49664 rpq=23 cbr=0 cng=2762 gpc=45478 gps=1762 nf=1201 nn=136629
+  3 np=236249 qsp=48766 rpq=98 cbr=0 cng=286 gpc=48049 gps=1218 nf=207 nn=137723
+  4 np=221310 qsp=46850 rpq=7 cbr=0 cng=26 gpc=43161 gps=4634 nf=3529 nn=123110
+  5 np=237332 qsp=48449 rpq=9 cbr=0 cng=54 gpc=47920 gps=3252 nf=201 nn=137456
+  6 np=219995 qsp=46718 rpq=12 cbr=0 cng=50 gpc=42098 gps=6093 nf=4202 nn=120834
+  7 np=249893 qsp=49390 rpq=42 cbr=0 cng=72 gpc=38400 gps=17102 nf=41 nn=144888
 rcu_bh:
-  0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nn=145314
-  1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nn=143180
-  2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nn=117936
-  3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nn=134863
-  4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nn=110671
-  5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nn=133235
-  6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nn=110921
-  7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nn=118542
+  0 np=146741 qsp=1419 rpq=6 cbr=0 cng=6 gpc=0 gps=0 nf=2 nn=145314
+  1 np=155792 qsp=12597 rpq=3 cbr=0 cng=0 gpc=4 gps=8 nf=3 nn=143180
+  2 np=136629 qsp=18680 rpq=1 cbr=0 cng=0 gpc=7 gps=6 nf=0 nn=117936
+  3 np=137723 qsp=2843 rpq=0 cbr=0 cng=0 gpc=10 gps=7 nf=0 nn=134863
+  4 np=123110 qsp=12433 rpq=0 cbr=0 cng=0 gpc=4 gps=2 nf=0 nn=110671
+  5 np=137456 qsp=4210 rpq=1 cbr=0 cng=0 gpc=6 gps=5 nf=0 nn=133235
+  6 np=120834 qsp=9902 rpq=2 cbr=0 cng=0 gpc=6 gps=3 nf=2 nn=110921
+  7 np=144888 qsp=26336 rpq=0 cbr=0 cng=0 gpc=8 gps=2 nf=0 nn=118542
 
 As always, this is once again split into "rcu_sched" and "rcu_bh"
 portions, with CONFIG_TREE_PREEMPT_RCU kernels having an additional
@@ -377,6 +377,17 @@ o	"gpc" is the number of times that an old grace period had
 o	"gps" is the number of times that a new grace period had started,
 	but this CPU was not yet aware of it.
 
+o	"nf" is the number of times that this CPU suspected that the
+	current grace period had run for too long, and thus needed to
+	be forced.
+
+	Please note that "forcing" consists of sending resched IPIs
+	to holdout CPUs.  If that CPU really still is in an old RCU
+	read-side critical section, then we really do have to wait for it.
+	The assumption behing "forcing" is that the CPU is not still in
+	an old RCU read-side critical section, but has not yet responded
+	for some other reason.
+
 o	"nn" is the number of times that this CPU needed nothing.  Alert
 	readers will note that the rcu "nn" number for a given CPU very
 	closely matches the rcu_bh "np" number for that same CPU.  This

trunk/Documentation/RCU/whatisRCU.txt

@@ -873,7 +873,7 @@ d.	Do you need to treat NMI handlers, hardirq handlers,
 	and code segments with preemption disabled (whether
 	via preempt_disable(), local_irq_save(), local_bh_disable(),
 	or some other mechanism) as if they were explicit RCU readers?
-	If so, RCU-sched is the only choice that will work for you.
+	If so, you need RCU-sched.
 
 e.	Do you need RCU grace periods to complete even in the face
 	of softirq monopolization of one or more of the CPUs?  For
@@ -884,12 +884,7 @@ f.	Is your workload too update-intensive for normal use of
 	RCU, but inappropriate for other synchronization mechanisms?
 	If so, consider SLAB_DESTROY_BY_RCU.  But please be careful!
 
-g.	Do you need read-side critical sections that are respected
-	even though they are in the middle of the idle loop, during
-	user-mode execution, or on an offlined CPU?  If so, SRCU is the
-	only choice that will work for you.
-
-h.	Otherwise, use RCU.
+g.	Otherwise, use RCU.
 
 Of course, this all assumes that you have determined that RCU is in fact
 the right tool for your job.

trunk/Documentation/accounting/getdelays.c

@@ -98,9 +98,10 @@ static int create_nl_socket(int protocol)
 	if (rcvbufsz)
 		if (setsockopt(fd, SOL_SOCKET, SO_RCVBUF,
 				&rcvbufsz, sizeof(rcvbufsz)) < 0) {
-			fprintf(stderr, "Unable to set socket rcv buf size to %d\n",
+			fprintf(stderr, "Unable to set socket rcv buf size "
+					"to %d\n",
 				rcvbufsz);
-			goto error;
+			return -1;
 		}
 
 	memset(&local, 0, sizeof(local));

trunk/Documentation/devicetree/bindings/regulator/regulator.txt

@@ -11,13 +11,10 @@ Optional properties:
 - regulator-boot-on: bootloader/firmware enabled regulator
 - <name>-supply: phandle to the parent supply/regulator node
 - regulator-ramp-delay: ramp delay for regulator(in uV/uS)
-
-Deprecated properties:
 - regulator-compatible: If a regulator chip contains multiple
   regulators, and if the chip's binding contains a child node that
   describes each regulator, then this property indicates which regulator
-  this child node is intended to configure. If this property is missing,
-  the node's name will be used instead.
+  this child node is intended to configure.
 
 Example:
 

trunk/Documentation/devicetree/bindings/regulator/tps65217.txt

@@ -22,49 +22,66 @@ Example:
 		compatible = "ti,tps65217";
 
 		regulators {
-			dcdc1_reg: dcdc1 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			dcdc1_reg: regulator@0 {
+				reg = <0>;
+				regulator-compatible = "dcdc1";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			dcdc2_reg: dcdc2 {
+			dcdc2_reg: regulator@1 {
+				reg = <1>;
+				regulator-compatible = "dcdc2";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			dcdc3_reg: dcc3 {
+			dcdc3_reg: regulator@2 {
+				reg = <2>;
+				regulator-compatible = "dcdc3";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo1_reg: ldo1 {
+			ldo1_reg: regulator@3 {
+				reg = <3>;
+				regulator-compatible = "ldo1";
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo2_reg: ldo2 {
+			ldo2_reg: regulator@4 {
+				reg = <4>;
+				regulator-compatible = "ldo2";
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo3_reg: ldo3 {
+			ldo3_reg: regulator@5 {
+				reg = <5>;
+				regulator-compatible = "ldo3";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
 				regulator-always-on;
 			};
 
-			ldo4_reg: ldo4 {
+			ldo4_reg: regulator@6 {
+				reg = <6>;
+				regulator-compatible = "ldo4";
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;