Merge tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-…

…2.6 into next/dt From Shawn Guo <shawn.guo@linaro.org>: It's based on imx/multiplatform branch. Most of them are dts changes. There are also a few imx6 improvement patches in there. * tag 'imx-dt-3.8' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx6q: select ARM and PL310 errata ARM: imx6q: print silicon version on boot ARM i.MX dts: Consistently add labels to devicenodes ARM: dts: imx6q-sabresd: add volume up/down gpio keys ARM: dts: imx53: pinctl update ARM: imx: enable cpufreq for imx6q ARM: dts: imx6q: enable snvs lp rtc ARM: dts: imx6q-sabreauto: Add basic support ARM: imx6q: let users input debug uart port number ARM: dts: imx53-qsb: Make DA9053 regulator functional ARM: dts: imx53-qsb: Use pinctrl for gpio-led ARM i.MX dtsi: Add default bus-width property for esdhc controller Signed-off-by: Arnd Bregmann <arnd@arndb.de>
git-mirror · Nov 16, 2012 · e014f77 · e014f77
2 parents 9336352 + 96efb44
commit e014f77
Show file tree

Hide file tree

Showing 16 changed files with 389 additions and 139 deletions.
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -41,6 +41,10 @@ i.MX6 Quad SABRE Smart Device Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabresd", "fsl,imx6q";
 
+i.MX6 Quad SABRE Automotive Board
+Required root node properties:
+    - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
+
 Generic i.MX boards
 -------------------
 

diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
@@ -226,20 +226,12 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX50 or i.MX53.
 
-	config DEBUG_IMX6Q_UART2
-		bool "i.MX6Q Debug UART2"
+	config DEBUG_IMX6Q_UART
+		bool "i.MX6Q Debug UART"
 		depends on SOC_IMX6Q
 		help
 		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q UART2. This is correct for e.g. the SabreLite
-                  board.
-
-	config DEBUG_IMX6Q_UART4
-		bool "i.MX6Q Debug UART4"
-		depends on SOC_IMX6Q
-		help
-		  Say Y here if you want kernel low-level debugging support
-		  on i.MX6Q UART4.
+		  on i.MX6Q.
 
 	config DEBUG_MMP_UART2
 		bool "Kernel low-level debugging message via MMP UART2"
@@ -426,6 +418,15 @@ choice
 
 endchoice
 
+config DEBUG_IMX6Q_UART_PORT
+	int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART
+	range 1 5
+	default 1
+	depends on SOC_IMX6Q
+	help
+	  Choose UART port on which kernel low-level debug messages
+	  should be output.
+
 config DEBUG_LL_INCLUDE
 	string
 	default "debug/icedcc.S" if DEBUG_ICEDCC
@@ -435,8 +436,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX31_IMX35_UART || \
 				 DEBUG_IMX51_UART || \
 				 DEBUG_IMX50_IMX53_UART ||\
-				 DEBUG_IMX6Q_UART2 || \
-				 DEBUG_IMX6Q_UART4
+				 DEBUG_IMX6Q_UART
 	default "debug/highbank.S" if DEBUG_HIGHBANK_UART
 	default "debug/mvebu.S" if DEBUG_MVEBU_UART
 	default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART

diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
@@ -51,6 +51,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx51-babbage.dtb \
 	imx53-qsb.dtb \
 	imx53-smd.dtb \
 	imx6q-arm2.dtb \
+	imx6q-sabreauto.dtb \
 	imx6q-sabrelite.dtb \
 	imx6q-sabresd.dtb
 dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \

diff --git a/arch/arm/boot/dts/imx27.dtsi b/arch/arm/boot/dts/imx27.dtsi
@@ -58,7 +58,7 @@
 			reg = <0x10000000 0x10000000>;
 			ranges;
 
-			wdog@10002000 {
+			wdog: wdog@10002000 {
 				compatible = "fsl,imx27-wdt", "fsl,imx21-wdt";
 				reg = <0x10002000 0x4000>;
 				interrupts = <27>;
@@ -218,7 +218,8 @@
 				status = "disabled";
 			};
 		};
-		nand@d8000000 {
+
+		nfc: nand@d8000000 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 

diff --git a/arch/arm/boot/dts/imx51.dtsi b/arch/arm/boot/dts/imx51.dtsi
@@ -76,17 +76,18 @@
 				reg = <0x70000000 0x40000>;
 				ranges;
 
-				esdhc@70004000 { /* ESDHC1 */
+				esdhc1: esdhc@70004000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70004000 0x4000>;
 					interrupts = <1>;
 					status = "disabled";
 				};
 
-				esdhc@70008000 { /* ESDHC2 */
+				esdhc2: esdhc@70008000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70008000 0x4000>;
 					interrupts = <2>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
@@ -97,7 +98,7 @@
 					status = "disabled";
 				};
 
-				ecspi@70010000 { /* ECSPI1 */
+				ecspi1: ecspi@70010000 {
 					#address-cells = <1>;
 					#size-cells = <0>;
 					compatible = "fsl,imx51-ecspi";
@@ -115,43 +116,45 @@
 					status = "disabled";
 				};
 
-				esdhc@70020000 { /* ESDHC3 */
+				esdhc3: esdhc@70020000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70020000 0x4000>;
 					interrupts = <3>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 
-				esdhc@70024000 { /* ESDHC4 */
+				esdhc4: esdhc@70024000 {
 					compatible = "fsl,imx51-esdhc";
 					reg = <0x70024000 0x4000>;
 					interrupts = <4>;
+					bus-width = <4>;
 					status = "disabled";
 				};
 			};
 
-			usb@73f80000 {
+			usbotg: usb@73f80000 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80000 0x0200>;
 				interrupts = <18>;
 				status = "disabled";
 			};
 
-			usb@73f80200 {
+			usbh1: usb@73f80200 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80200 0x0200>;
 				interrupts = <14>;
 				status = "disabled";
 			};
 
-			usb@73f80400 {
+			usbh2: usb@73f80400 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80400 0x0200>;
 				interrupts = <16>;
 				status = "disabled";
 			};
 
-			usb@73f80600 {
+			usbh3: usb@73f80600 {
 				compatible = "fsl,imx51-usb", "fsl,imx27-usb";
 				reg = <0x73f80600 0x0200>;
 				interrupts = <17>;
@@ -198,20 +201,20 @@
 				#interrupt-cells = <2>;
 			};
 
-			wdog@73f98000 { /* WDOG1 */
+			wdog1: wdog@73f98000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f98000 0x4000>;
 				interrupts = <58>;
 			};
 
-			wdog@73f9c000 { /* WDOG2 */
+			wdog2: wdog@73f9c000 {
 				compatible = "fsl,imx51-wdt", "fsl,imx21-wdt";
 				reg = <0x73f9c000 0x4000>;
 				interrupts = <59>;
 				status = "disabled";
 			};
 
-			iomuxc@73fa8000 {
+			iomuxc: iomuxc@73fa8000 {
 				compatible = "fsl,imx51-iomuxc";
 				reg = <0x73fa8000 0x4000>;
 
@@ -349,7 +352,7 @@
 			reg = <0x80000000 0x10000000>;
 			ranges;
 
-			ecspi@83fac000 { /* ECSPI2 */
+			ecspi2: ecspi@83fac000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-ecspi";
@@ -358,14 +361,14 @@
 				status = "disabled";
 			};
 
-			sdma@83fb0000 {
+			sdma: sdma@83fb0000 {
 				compatible = "fsl,imx51-sdma", "fsl,imx35-sdma";
 				reg = <0x83fb0000 0x4000>;
 				interrupts = <6>;
 				fsl,sdma-ram-script-name = "imx/sdma/sdma-imx51.bin";
 			};
 
-			cspi@83fc0000 {
+			cspi: cspi@83fc0000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
@@ -374,7 +377,7 @@
 				status = "disabled";
 			};
 
-			i2c@83fc4000 { /* I2C2 */
+			i2c2: i2c@83fc4000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -383,7 +386,7 @@
 				status = "disabled";
 			};
 
-			i2c@83fc8000 { /* I2C1 */
+			i2c1: i2c@83fc8000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
 				compatible = "fsl,imx51-i2c", "fsl,imx21-i2c";
@@ -401,13 +404,13 @@
 				status = "disabled";
 			};
 
-			audmux@83fd0000 {
+			audmux: audmux@83fd0000 {
 				compatible = "fsl,imx51-audmux", "fsl,imx31-audmux";
 				reg = <0x83fd0000 0x4000>;
 				status = "disabled";
 			};
 
-			nand@83fdb000 {
+			nfc: nand@83fdb000 {
 				compatible = "fsl,imx51-nand";
 				reg = <0x83fdb000 0x1000 0xcfff0000 0x10000>;
 				interrupts = <8>;
@@ -423,7 +426,7 @@
 				status = "disabled";
 			};
 
-			ethernet@83fec000 {
+			fec: ethernet@83fec000 {
 				compatible = "fsl,imx51-fec", "fsl,imx27-fec";
 				reg = <0x83fec000 0x4000>;
 				interrupts = <87>;