Merge tag 'imx-soc-3.14' of git://git.linaro.org/people/shawnguo/linu…

…x-2.6 into next/soc

From Shawn Guo:
i.MX SoC changes for 3.14:
 - Add the initial i.MX50 SoC support
 - Support device tree boot for i.MX35
 - Move imx5 clock driver to use macros for clock ID
 - Some random updates and non-critical fixes on clock drivers
 - A few defconfig updates and minor cleanups

* tag 'imx-soc-3.14' of git://git.linaro.org/people/shawnguo/linux-2.6: (37 commits)
  ARM: imx: improve the comment of CCM lpm SW workaround
  ARM: imx: improve status check of clock gate
  ARM: imx: add necessary interface for pfd
  ARM: imx_v6_v7_defconfig: Select CONFIG_REGULATOR_PFUZE100
  ARM: imx_v6_v7_defconfig: Select MX35 and MX50 device tree support
  ARM: imx: Add cpu frequency scaling support
  ARM i.MX35: Add devicetree support.
  ARM: imx: update imx_v6_v7_defconfig
  ARM: imx6sl: Add missing spba clock to clock tree
  ARM: imx6sl: Add missing pll4_audio_div to the clock tree
  ARM: imx6: Derive spdif clock from pll3_pfd3_454m
  ARM: imx: use __initconst for const init definition
  ARM i.MX5: fix obvious typo in ldb_di0_gate clk definition
  ARM i.MX5: set CAN peripheral clock to 24 MHz parent
  ARM: imx: pllv1: Fix PLL calculation for i.MX27
  ARM i.MX5: fix "shift" value for lp_apm_sel on i.MX50 and i.MX53
  ARM: imx: imx53: Add SATA PHY clock
  ARM: imx_v6_v7_defconfig: Enable STMPE touchscreen
  ARM: imx: rename IMX6SL_CLK_CLK_END to IMX6SL_CLK_END
  ARM: imx: select PINCTRL at sub-architecure level
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/clock/imx35-clock.txt

@@ -0,0 +1,113 @@
+* Clock bindings for Freescale i.MX35
+
+Required properties:
+- compatible: Should be "fsl,imx35-ccm"
+- reg: Address and length of the register set
+- interrupts: Should contain CCM interrupt
+- #clock-cells: Should be <1>
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell.  The following is a full list of i.MX35
+clocks and IDs.
+
+	Clock			ID
+	---------------------------
+	ckih			0
+	mpll			1
+	ppll			2
+	mpll_075		3
+	arm			4
+	hsp			5
+	hsp_div			6
+	hsp_sel			7
+	ahb			8
+	ipg			9
+	arm_per_div		10
+	ahb_per_div		11
+	ipg_per			12
+	uart_sel		13
+	uart_div		14
+	esdhc_sel		15
+	esdhc1_div		16
+	esdhc2_div		17
+	esdhc3_div		18
+	spdif_sel		19
+	spdif_div_pre		20
+	spdif_div_post		21
+	ssi_sel			22
+	ssi1_div_pre		23
+	ssi1_div_post		24
+	ssi2_div_pre		25
+	ssi2_div_post		26
+	usb_sel			27
+	usb_div			28
+	nfc_div			29
+	asrc_gate		30
+	pata_gate		31
+	audmux_gate		32
+	can1_gate		33
+	can2_gate		34
+	cspi1_gate		35
+	cspi2_gate		36
+	ect_gate		37
+	edio_gate		38
+	emi_gate		39
+	epit1_gate		40
+	epit2_gate		41
+	esai_gate		42
+	esdhc1_gate		43
+	esdhc2_gate		44
+	esdhc3_gate		45
+	fec_gate		46
+	gpio1_gate		47
+	gpio2_gate		48
+	gpio3_gate		49
+	gpt_gate		50
+	i2c1_gate		51
+	i2c2_gate		52
+	i2c3_gate		53
+	iomuxc_gate		54
+	ipu_gate		55
+	kpp_gate		56
+	mlb_gate		57
+	mshc_gate		58
+	owire_gate		59
+	pwm_gate		60
+	rngc_gate		61
+	rtc_gate		62
+	rtic_gate		63
+	scc_gate		64
+	sdma_gate		65
+	spba_gate		66
+	spdif_gate		67
+	ssi1_gate		68
+	ssi2_gate		69
+	uart1_gate		70
+	uart2_gate		71
+	uart3_gate		72
+	usbotg_gate		73
+	wdog_gate		74
+	max_gate		75
+	admux_gate		76
+	csi_gate		77
+	csi_div			78
+	csi_sel			79
+	iim_gate		80
+	gpu2d_gate		81
+
+Examples:
+
+clks: ccm@53f80000 {
+	compatible = "fsl,imx35-ccm";
+	reg = <0x53f80000 0x4000>;
+	interrupts = <31>;
+	#clock-cells = <1>;
+};
+
+esdhc1: esdhc@53fb4000 {
+	compatible = "fsl,imx35-esdhc";
+	reg = <0x53fb4000 0x4000>;
+	interrupts = <7>;
+	clocks = <&clks 9>, <&clks 8>, <&clks 43>;
+	clock-names = "ipg", "ahb", "per";
+};

Documentation/devicetree/bindings/clock/imx5-clock.txt

@@ -7,197 +7,8 @@ Required properties:
 - #clock-cells: Should be <1>
 
 The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.  The following is a full list of i.MX5
-clocks and IDs.
-
-	Clock			ID
-	---------------------------
-	dummy			0
-	ckil			1
-	osc			2
-	ckih1			3
-	ckih2			4
-	ahb			5
-	ipg			6
-	axi_a			7
-	axi_b			8
-	uart_pred		9
-	uart_root		10
-	esdhc_a_pred		11
-	esdhc_b_pred		12
-	esdhc_c_s		13
-	esdhc_d_s		14
-	emi_sel			15
-	emi_slow_podf		16
-	nfc_podf		17
-	ecspi_pred		18
-	ecspi_podf		19
-	usboh3_pred		20
-	usboh3_podf		21
-	usb_phy_pred		22
-	usb_phy_podf		23
-	cpu_podf		24
-	di_pred			25
-	tve_s			27
-	uart1_ipg_gate		28
-	uart1_per_gate		29
-	uart2_ipg_gate		30
-	uart2_per_gate		31
-	uart3_ipg_gate		32
-	uart3_per_gate		33
-	i2c1_gate		34
-	i2c2_gate		35
-	gpt_ipg_gate		36
-	pwm1_ipg_gate		37
-	pwm1_hf_gate		38
-	pwm2_ipg_gate		39
-	pwm2_hf_gate		40
-	gpt_hf_gate		41
-	fec_gate		42
-	usboh3_per_gate		43
-	esdhc1_ipg_gate		44
-	esdhc2_ipg_gate		45
-	esdhc3_ipg_gate		46
-	esdhc4_ipg_gate		47
-	ssi1_ipg_gate		48
-	ssi2_ipg_gate		49
-	ssi3_ipg_gate		50
-	ecspi1_ipg_gate		51
-	ecspi1_per_gate		52
-	ecspi2_ipg_gate		53
-	ecspi2_per_gate		54
-	cspi_ipg_gate		55
-	sdma_gate		56
-	emi_slow_gate		57
-	ipu_s			58
-	ipu_gate		59
-	nfc_gate		60
-	ipu_di1_gate		61
-	vpu_s			62
-	vpu_gate		63
-	vpu_reference_gate	64
-	uart4_ipg_gate		65
-	uart4_per_gate		66
-	uart5_ipg_gate		67
-	uart5_per_gate		68
-	tve_gate		69
-	tve_pred		70
-	esdhc1_per_gate		71
-	esdhc2_per_gate		72
-	esdhc3_per_gate		73
-	esdhc4_per_gate		74
-	usb_phy_gate		75
-	hsi2c_gate		76
-	mipi_hsc1_gate		77
-	mipi_hsc2_gate		78
-	mipi_esc_gate		79
-	mipi_hsp_gate		80
-	ldb_di1_div_3_5		81
-	ldb_di1_div		82
-	ldb_di0_div_3_5		83
-	ldb_di0_div		84
-	ldb_di1_gate		85
-	can2_serial_gate	86
-	can2_ipg_gate		87
-	i2c3_gate		88
-	lp_apm			89
-	periph_apm		90
-	main_bus		91
-	ahb_max			92
-	aips_tz1		93
-	aips_tz2		94
-	tmax1			95
-	tmax2			96
-	tmax3			97
-	spba			98
-	uart_sel		99
-	esdhc_a_sel		100
-	esdhc_b_sel		101
-	esdhc_a_podf		102
-	esdhc_b_podf		103
-	ecspi_sel		104
-	usboh3_sel		105
-	usb_phy_sel		106
-	iim_gate		107
-	usboh3_gate		108
-	emi_fast_gate		109
-	ipu_di0_gate		110
-	gpc_dvfs		111
-	pll1_sw			112
-	pll2_sw			113
-	pll3_sw			114
-	ipu_di0_sel		115
-	ipu_di1_sel		116
-	tve_ext_sel		117
-	mx51_mipi		118
-	pll4_sw			119
-	ldb_di1_sel		120
-	di_pll4_podf		121
-	ldb_di0_sel		122
-	ldb_di0_gate		123
-	usb_phy1_gate		124
-	usb_phy2_gate		125
-	per_lp_apm		126
-	per_pred1		127
-	per_pred2		128
-	per_podf		129
-	per_root		130
-	ssi_apm			131
-	ssi1_root_sel		132
-	ssi2_root_sel		133
-	ssi3_root_sel		134
-	ssi_ext1_sel		135
-	ssi_ext2_sel		136
-	ssi_ext1_com_sel	137
-	ssi_ext2_com_sel	138
-	ssi1_root_pred		139
-	ssi1_root_podf		140
-	ssi2_root_pred		141
-	ssi2_root_podf		142
-	ssi_ext1_pred		143
-	ssi_ext1_podf		144
-	ssi_ext2_pred		145
-	ssi_ext2_podf		146
-	ssi1_root_gate		147
-	ssi2_root_gate		148
-	ssi3_root_gate		149
-	ssi_ext1_gate		150
-	ssi_ext2_gate		151
-	epit1_ipg_gate		152
-	epit1_hf_gate		153
-	epit2_ipg_gate		154
-	epit2_hf_gate		155
-	can_sel			156
-	can1_serial_gate	157
-	can1_ipg_gate		158
-	owire_gate		159
-	gpu3d_s			160
-	gpu2d_s			161
-	gpu3d_gate		162
-	gpu2d_gate		163
-	garb_gate		164
-	cko1_sel		165
-	cko1_podf		166
-	cko1			167
-	cko2_sel		168
-	cko2_podf		169
-	cko2			170
-	srtc_gate		171
-	pata_gate		172
-	sata_gate		173
-	spdif_xtal_sel		174
-	spdif0_sel		175
-	spdif1_sel		176
-	spdif0_pred		177
-	spdif0_podf		178
-	spdif1_pred		179
-	spdif1_podf		180
-	spdif0_com_sel		181
-	spdif1_com_sel		182
-	spdif0_gate		183
-	spdif1_gate		184
-	spdif_ipg_gate		185
-	ocram			186
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+for the full list of i.MX5 clock IDs.
 
 Examples (for mx53):
 
@@ -212,7 +23,7 @@ can1: can@53fc8000 {
 	compatible = "fsl,imx53-flexcan", "fsl,p1010-flexcan";
 	reg = <0x53fc8000 0x4000>;
 	interrupts = <82>;
-	clocks = <&clks 158>, <&clks 157>;
+	clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
 	clock-names = "ipg", "per";
 	status = "disabled";
 };

arch/arm/Kconfig.debug

@@ -263,6 +263,13 @@ choice
 		  Say Y here if you want kernel low-level debugging support
 		  on i.MX35.
 
+	config DEBUG_IMX50_UART
+		bool "i.MX50 Debug UART"
+		depends on SOC_IMX50
+		help
+		  Say Y here if you want kernel low-level debugging support
+		  on i.MX50.
+
 	config DEBUG_IMX51_UART
 		bool "i.MX51 Debug UART"
 		depends on SOC_IMX51
@@ -905,6 +912,7 @@ config DEBUG_IMX_UART_PORT
 						DEBUG_IMX21_IMX27_UART || \
 						DEBUG_IMX31_UART || \
 						DEBUG_IMX35_UART || \
+						DEBUG_IMX50_UART || \
 						DEBUG_IMX51_UART || \
 						DEBUG_IMX53_UART || \
 						DEBUG_IMX6Q_UART || \
@@ -939,6 +947,7 @@ config DEBUG_LL_INCLUDE
 				 DEBUG_IMX21_IMX27_UART || \
 				 DEBUG_IMX31_UART || \
 				 DEBUG_IMX35_UART || \
+				 DEBUG_IMX50_UART || \
 				 DEBUG_IMX51_UART || \
 				 DEBUG_IMX53_UART ||\
 				 DEBUG_IMX6Q_UART || \

arch/arm/configs/imx_v4_v5_defconfig

@@ -91,6 +91,7 @@ CONFIG_SMSC911X=y
 CONFIG_SMSC_PHY=y
 # CONFIG_INPUT_MOUSEDEV is not set
 CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
 CONFIG_KEYBOARD_IMX=y
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_INPUT_TOUCHSCREEN=y
@@ -118,6 +119,7 @@ CONFIG_IMX2_WDT=y
 CONFIG_MFD_MC13XXX_SPI=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_GPIO=y
 CONFIG_REGULATOR_MC13783=y
 CONFIG_REGULATOR_MC13892=y
 CONFIG_MEDIA_SUPPORT=y