Merge branch 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git…

…/paulus/powerpc

* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc:
  [PATCH] powerpc: update cell_defconfig
  [PATCH] spufs: Disable local interrupts for SPE hash_page calls.
  [PATCH] powerpc: Add cputable entry for POWER6
  [PATCH] ppc32 CPM_UART: Fixed odd address translations
  [PATCH] ppc32: Update board-specific code of the CPM UART users
  [PATCH] ppc32 CPM_UART: Convert to use platform devices
  [PATCH] ppc32: odd fixes and improvements in ppc_sys
  [PATCH] powerpc: Wire up *at syscalls
  [PATCH] ppc32: add 440GX erratum 440_43 workaround
  [PATCH] powerpc: Use check_legacy_ioport() on ppc32 too.
  [PATCH] powerpc64: Fix loading of modules without a .toc section
  [PATCH] sound/ppc: snd_pmac_toonie_init should be __init
  powerpc/pseries: Tell firmware our capabilities on new machines
  [PATCH] powerpc: Fix pagetable bloat for hugepages

arch/powerpc/configs/cell_defconfig

@@ -9,6 +9,7 @@ CONFIG_PPC_MERGE=y
 CONFIG_MMU=y
 CONFIG_GENERIC_HARDIRQS=y
 CONFIG_RWSEM_XCHGADD_ALGORITHM=y
+CONFIG_GENERIC_HWEIGHT=y
 CONFIG_GENERIC_CALIBRATE_DELAY=y
 CONFIG_PPC=y
 CONFIG_EARLY_PRINTK=y
@@ -55,6 +56,7 @@ CONFIG_SYSCTL=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 # CONFIG_CPUSETS is not set
+# CONFIG_RELAY is not set
 CONFIG_INITRAMFS_SOURCE=""
 CONFIG_CC_OPTIMIZE_FOR_SIZE=y
 # CONFIG_EMBEDDED is not set
@@ -69,10 +71,6 @@ CONFIG_BASE_FULL=y
 CONFIG_FUTEX=y
 CONFIG_EPOLL=y
 CONFIG_SHMEM=y
-CONFIG_CC_ALIGN_FUNCTIONS=0
-CONFIG_CC_ALIGN_LABELS=0
-CONFIG_CC_ALIGN_LOOPS=0
-CONFIG_CC_ALIGN_JUMPS=0
 CONFIG_SLAB=y
 # CONFIG_TINY_SHMEM is not set
 CONFIG_BASE_SMALL=0
@@ -84,7 +82,6 @@ CONFIG_BASE_SMALL=0
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_MODULE_FORCE_UNLOAD is not set
-CONFIG_OBSOLETE_MODPARM=y
 # CONFIG_MODVERSIONS is not set
 # CONFIG_MODULE_SRCVERSION_ALL is not set
 CONFIG_KMOD=y
@@ -93,6 +90,7 @@ CONFIG_STOP_MACHINE=y
 #
 # Block layer
 #
+# CONFIG_BLK_DEV_IO_TRACE is not set
 
 #
 # IO Schedulers
@@ -126,6 +124,7 @@ CONFIG_RTAS_FLASH=y
 CONFIG_MMIO_NVRAM=y
 CONFIG_CELL_IIC=y
 # CONFIG_PPC_MPC106 is not set
+# CONFIG_PPC_970_NAP is not set
 # CONFIG_CPU_FREQ is not set
 # CONFIG_WANT_EARLY_SERIAL is not set
 
@@ -167,7 +166,6 @@ CONFIG_HAVE_MEMORY_PRESENT=y
 CONFIG_SPARSEMEM_EXTREME=y
 # CONFIG_MEMORY_HOTPLUG is not set
 CONFIG_SPLIT_PTLOCK_CPUS=4
-CONFIG_MIGRATION=y
 # CONFIG_PPC_64K_PAGES is not set
 CONFIG_SCHED_SMT=y
 CONFIG_PROC_DEVICETREE=y
@@ -184,7 +182,6 @@ CONFIG_GENERIC_ISA_DMA=y
 # CONFIG_PPC_INDIRECT_PCI is not set
 CONFIG_PCI=y
 CONFIG_PCI_DOMAINS=y
-CONFIG_PCI_LEGACY_PROC=y
 # CONFIG_PCI_DEBUG is not set
 
 #
@@ -226,6 +223,7 @@ CONFIG_SYN_COOKIES=y
 # CONFIG_INET_AH is not set
 # CONFIG_INET_ESP is not set
 # CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
 CONFIG_INET_TUNNEL=y
 CONFIG_INET_DIAG=y
 CONFIG_INET_TCP_DIAG=y
@@ -242,6 +240,7 @@ CONFIG_IPV6=y
 CONFIG_INET6_AH=m
 CONFIG_INET6_ESP=m
 CONFIG_INET6_IPCOMP=m
+CONFIG_INET6_XFRM_TUNNEL=m
 CONFIG_INET6_TUNNEL=m
 CONFIG_IPV6_TUNNEL=m
 CONFIG_NETFILTER=y
@@ -632,6 +631,7 @@ CONFIG_SERIAL_NONSTANDARD=y
 #
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_PCI=y
 CONFIG_SERIAL_8250_NR_UARTS=4
 CONFIG_SERIAL_8250_RUNTIME_UARTS=4
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -717,7 +717,6 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_I2C_PARPORT_LIGHT is not set
 # CONFIG_I2C_PROSAVAGE is not set
 # CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_SCx200_ACB is not set
 # CONFIG_I2C_SIS5595 is not set
 # CONFIG_I2C_SIS630 is not set
 # CONFIG_I2C_SIS96X is not set
@@ -736,9 +735,7 @@ CONFIG_I2C_ALGOBIT=y
 # CONFIG_SENSORS_PCF8574 is not set
 # CONFIG_SENSORS_PCA9539 is not set
 # CONFIG_SENSORS_PCF8591 is not set
-# CONFIG_SENSORS_RTC8564 is not set
 # CONFIG_SENSORS_MAX6875 is not set
-# CONFIG_RTC_X1205_I2C is not set
 # CONFIG_I2C_DEBUG_CORE is not set
 # CONFIG_I2C_DEBUG_ALGO is not set
 # CONFIG_I2C_DEBUG_BUS is not set
@@ -765,10 +762,6 @@ CONFIG_I2C_ALGOBIT=y
 # Misc devices
 #
 
-#
-# Multimedia Capabilities Port drivers
-#
-
 #
 # Multimedia devices
 #
@@ -817,6 +810,19 @@ CONFIG_USB_ARCH_HAS_EHCI=y
 #
 # CONFIG_MMC is not set
 
+#
+# LED devices
+#
+# CONFIG_NEW_LEDS is not set
+
+#
+# LED drivers
+#
+
+#
+# LED Triggers
+#
+
 #
 # InfiniBand support
 #
@@ -833,6 +839,11 @@ CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y
 # EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
 #
 
+#
+# Real Time Clock
+#
+# CONFIG_RTC_CLASS is not set
+
 #
 # File systems
 #
@@ -889,7 +900,6 @@ CONFIG_TMPFS=y
 CONFIG_HUGETLBFS=y
 CONFIG_HUGETLB_PAGE=y
 CONFIG_RAMFS=y
-# CONFIG_RELAYFS_FS is not set
 # CONFIG_CONFIGFS_FS is not set
 
 #

arch/powerpc/kernel/cputable.c

@@ -57,6 +57,8 @@ extern void __setup_cpu_ppc970(unsigned long offset, struct cpu_spec* spec);
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_POWER5_PLUS	(COMMON_USER_PPC64 | PPC_FEATURE_POWER5_PLUS|\
 				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
+#define COMMON_USER_POWER6	(COMMON_USER_PPC64 | PPC_FEATURE_ARCH_2_05 |\
+				 PPC_FEATURE_SMT | PPC_FEATURE_ICACHE_SNOOP)
 #define COMMON_USER_BOOKE	(PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU | \
 				 PPC_FEATURE_BOOKE)
 
@@ -263,6 +265,20 @@ struct cpu_spec	cpu_specs[] = {
 		.oprofile_type		= PPC_OPROFILE_POWER4,
 		.platform		= "power5+",
 	},
+	{	/* Power6 */
+		.pvr_mask		= 0xffff0000,
+		.pvr_value		= 0x003e0000,
+		.cpu_name		= "POWER6",
+		.cpu_features		= CPU_FTRS_POWER6,
+		.cpu_user_features	= COMMON_USER_POWER6,
+		.icache_bsize		= 128,
+		.dcache_bsize		= 128,
+		.num_pmcs		= 6,
+		.cpu_setup		= __setup_cpu_power4,
+		.oprofile_cpu_type	= "ppc64/power6",
+		.oprofile_type		= PPC_OPROFILE_POWER4,
+		.platform		= "power6",
+	},
 	{	/* Cell Broadband Engine */
 		.pvr_mask		= 0xffff0000,
 		.pvr_value		= 0x00700000,

arch/powerpc/kernel/module_64.c

@@ -191,11 +191,19 @@ int module_frob_arch_sections(Elf64_Ehdr *hdr,
 				 (void *)hdr
 				 + sechdrs[sechdrs[i].sh_link].sh_offset);
 	}
-	if (!me->arch.stubs_section || !me->arch.toc_section) {
-		printk("%s: doesn't contain .toc or .stubs.\n", me->name);
+
+	if (!me->arch.stubs_section) {
+		printk("%s: doesn't contain .stubs.\n", me->name);
 		return -ENOEXEC;
 	}
 
+	/* If we don't have a .toc, just use .stubs.  We need to set r2
+	   to some reasonable value in case the module calls out to
+	   other functions via a stub, or if a function pointer escapes
+	   the module by some means.  */
+	if (!me->arch.toc_section)
+		me->arch.toc_section = me->arch.stubs_section;
+
 	/* Override the stubs size */
 	sechdrs[me->arch.stubs_section].sh_size = get_stubs_size(hdr, sechdrs);
 	return 0;
@@ -342,7 +350,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			break;
 
 		case R_PPC64_TOC16:
-			/* Subtact TOC pointer */
+			/* Subtract TOC pointer */
 			value -= my_r2(sechdrs, me);
 			if (value + 0x8000 > 0xffff) {
 				printk("%s: bad TOC16 relocation (%lu)\n",
@@ -355,7 +363,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs,
 			break;
 
 		case R_PPC64_TOC16_DS:
-			/* Subtact TOC pointer */
+			/* Subtract TOC pointer */
 			value -= my_r2(sechdrs, me);
 			if ((value & 3) != 0 || value + 0x8000 > 0xffff) {
 				printk("%s: bad TOC16_DS relocation (%lu)\n",

arch/powerpc/kernel/prom_init.c

@@ -636,10 +636,96 @@ static void __init early_cmdline_parse(void)
 
 #ifdef CONFIG_PPC_PSERIES
 /*
- * To tell the firmware what our capabilities are, we have to pass
- * it a fake 32-bit ELF header containing a couple of PT_NOTE sections
- * that contain structures that contain the actual values.
+ * There are two methods for telling firmware what our capabilities are.
+ * Newer machines have an "ibm,client-architecture-support" method on the
+ * root node.  For older machines, we have to call the "process-elf-header"
+ * method in the /packages/elf-loader node, passing it a fake 32-bit
+ * ELF header containing a couple of PT_NOTE sections that contain
+ * structures that contain various information.
  */
+
+/*
+ * New method - extensible architecture description vector.
+ *
+ * Because the description vector contains a mix of byte and word
+ * values, we declare it as an unsigned char array, and use this
+ * macro to put word values in.
+ */
+#define W(x)	((x) >> 24) & 0xff, ((x) >> 16) & 0xff, \
+		((x) >> 8) & 0xff, (x) & 0xff
+
+/* Option vector bits - generic bits in byte 1 */
+#define OV_IGNORE		0x80	/* ignore this vector */
+#define OV_CESSATION_POLICY	0x40	/* halt if unsupported option present*/
+
+/* Option vector 1: processor architectures supported */
+#define OV1_PPC_2_00		0x80	/* set if we support PowerPC 2.00 */
+#define OV1_PPC_2_01		0x40	/* set if we support PowerPC 2.01 */
+#define OV1_PPC_2_02		0x20	/* set if we support PowerPC 2.02 */
+#define OV1_PPC_2_03		0x10	/* set if we support PowerPC 2.03 */
+#define OV1_PPC_2_04		0x08	/* set if we support PowerPC 2.04 */
+#define OV1_PPC_2_05		0x04	/* set if we support PowerPC 2.05 */
+
+/* Option vector 2: Open Firmware options supported */
+#define OV2_REAL_MODE		0x20	/* set if we want OF in real mode */
+
+/* Option vector 3: processor options supported */
+#define OV3_FP			0x80	/* floating point */
+#define OV3_VMX			0x40	/* VMX/Altivec */
+
+/* Option vector 5: PAPR/OF options supported */
+#define OV5_LPAR		0x80	/* logical partitioning supported */
+#define OV5_SPLPAR		0x40	/* shared-processor LPAR supported */
+/* ibm,dynamic-reconfiguration-memory property supported */
+#define OV5_DRCONF_MEMORY	0x20
+#define OV5_LARGE_PAGES		0x10	/* large pages supported */
+
+/*
+ * The architecture vector has an array of PVR mask/value pairs,
+ * followed by # option vectors - 1, followed by the option vectors.
+ */
+static unsigned char ibm_architecture_vec[] = {
+	W(0xfffe0000), W(0x003a0000),	/* POWER5/POWER5+ */
+	W(0xffff0000), W(0x003e0000),	/* POWER6 */
+	W(0xfffffffe), W(0x0f000001),	/* all 2.04-compliant and earlier */
+	5 - 1,				/* 5 option vectors */
+
+	/* option vector 1: processor architectures supported */
+	3 - 1,				/* length */
+	0,				/* don't ignore, don't halt */
+	OV1_PPC_2_00 | OV1_PPC_2_01 | OV1_PPC_2_02 | OV1_PPC_2_03 |
+	OV1_PPC_2_04 | OV1_PPC_2_05,
+
+	/* option vector 2: Open Firmware options supported */
+	34 - 1,				/* length */
+	OV2_REAL_MODE,
+	0, 0,
+	W(0xffffffff),			/* real_base */
+	W(0xffffffff),			/* real_size */
+	W(0xffffffff),			/* virt_base */
+	W(0xffffffff),			/* virt_size */
+	W(0xffffffff),			/* load_base */
+	W(64),				/* 128MB min RMA */
+	W(0xffffffff),			/* full client load */
+	0,				/* min RMA percentage of total RAM */
+	48,				/* max log_2(hash table size) */
+
+	/* option vector 3: processor options supported */
+	3 - 1,				/* length */
+	0,				/* don't ignore, don't halt */
+	OV3_FP | OV3_VMX,
+
+	/* option vector 4: IBM PAPR implementation */
+	2 - 1,				/* length */
+	0,				/* don't halt */
+
+	/* option vector 5: PAPR/OF options */
+	3 - 1,				/* length */
+	0,				/* don't ignore, don't halt */
+	OV5_LPAR | OV5_SPLPAR | OV5_LARGE_PAGES,
+};
+
+/* Old method - ELF header with PT_NOTE sections */
 static struct fake_elf {
 	Elf32_Ehdr	elfhdr;
 	Elf32_Phdr	phdr[2];
@@ -728,8 +814,26 @@ static struct fake_elf {
 
 static void __init prom_send_capabilities(void)
 {
-	ihandle elfloader;
+	ihandle elfloader, root;
+	prom_arg_t ret;
+
+	root = call_prom("open", 1, 1, ADDR("/"));
+	if (root != 0) {
+		/* try calling the ibm,client-architecture-support method */
+		if (call_prom_ret("call-method", 3, 2, &ret,
+				  ADDR("ibm,client-architecture-support"),
+				  ADDR(ibm_architecture_vec)) == 0) {
+			/* the call exists... */
+			if (ret)
+				prom_printf("WARNING: ibm,client-architecture"
+					    "-support call FAILED!\n");
+			call_prom("close", 1, 0, root);
+			return;
+		}
+		call_prom("close", 1, 0, root);
+	}
 
+	/* no ibm,client-architecture-support call, try the old way */
 	elfloader = call_prom("open", 1, 1, ADDR("/packages/elf-loader"));
 	if (elfloader == 0) {
 		prom_printf("couldn't open /packages/elf-loader\n");

arch/powerpc/kernel/setup-common.c

@@ -516,3 +516,11 @@ void probe_machine(void)
 
 	printk(KERN_INFO "Using %s machine description\n", ppc_md.name);
 }
+
+int check_legacy_ioport(unsigned long base_port)
+{
+	if (ppc_md.check_legacy_ioport == NULL)
+		return 0;
+	return ppc_md.check_legacy_ioport(base_port);
+}
+EXPORT_SYMBOL(check_legacy_ioport);

arch/powerpc/kernel/setup_64.c

@@ -594,14 +594,6 @@ void ppc64_terminate_msg(unsigned int src, const char *msg)
 	printk("[terminate]%04x %s\n", src, msg);
 }
 
-int check_legacy_ioport(unsigned long base_port)
-{
-	if (ppc_md.check_legacy_ioport == NULL)
-		return 0;
-	return ppc_md.check_legacy_ioport(base_port);
-}
-EXPORT_SYMBOL(check_legacy_ioport);
-
 void cpu_die(void)
 {
 	if (ppc_md.cpu_die)