---

yaml
---
r: 256745
b: refs/heads/master
c: e4c8308
h: refs/heads/master
i:
  256743: e421030
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 626a96db11698119a67eeda130488e869aa6f14e
+refs/heads/master: e4c8308c852e6b3fa49215052a5b9e99597dee99

trunk/drivers/spi/Kconfig

@@ -86,9 +86,6 @@ config SPI_BFIN_SPORT
 	help
 	  Enable support for a SPI bus via the Blackfin SPORT peripheral.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called spi_bfin_sport.
-
 config SPI_AU1550
 	tristate "Au1550/Au12x0 SPI Controller"
 	depends on (SOC_AU1550 || SOC_AU1200) && EXPERIMENTAL
@@ -97,9 +94,6 @@ config SPI_AU1550
 	  If you say yes to this option, support will be included for the
 	  Au1550 SPI controller (may also work with Au1200,Au1210,Au1250).
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called au1550_spi.
-
 config SPI_BITBANG
 	tristate "Utilities for Bitbanging SPI masters"
 	help
@@ -130,29 +124,20 @@ config SPI_COLDFIRE_QSPI
 	  This enables support for the Coldfire QSPI controller in master
 	  mode.
 
-	  This driver can also be built as a module.  If so, the module
-	  will be called coldfire_qspi.
-
 config SPI_DAVINCI
 	tristate "Texas Instruments DaVinci/DA8x/OMAP-L/AM1x SoC SPI controller"
 	depends on SPI_MASTER && ARCH_DAVINCI
 	select SPI_BITBANG
 	help
 	  SPI master controller for DaVinci/DA8x/OMAP-L/AM1x SPI modules.
 
-	  This driver can also be built as a module. The module will be called
-	  davinci_spi.
-
 config SPI_EP93XX
 	tristate "Cirrus Logic EP93xx SPI controller"
 	depends on ARCH_EP93XX
 	help
 	  This enables using the Cirrus EP93xx SPI controller in master
 	  mode.
 
-	  To compile this driver as a module, choose M here. The module will be
-	  called ep93xx_spi.
-
 config SPI_GPIO
 	tristate "GPIO-based bitbanging SPI Master"
 	depends on GENERIC_GPIO
@@ -385,16 +370,16 @@ config SPI_TI_SSP
 	  This selects an SPI master implementation using a TI sequencer
 	  serial port.
 
-	  To compile this driver as a module, choose M here: the
-	  module will be called ti-ssp-spi.
-
 config SPI_TOPCLIFF_PCH
-	tristate "Topcliff PCH SPI Controller"
+	tristate "Intel EG20T PCH/OKI SEMICONDUCTOR ML7213 IOH SPI controller"
 	depends on PCI
 	help
 	  SPI driver for the Topcliff PCH (Platform Controller Hub) SPI bus
 	  used in some x86 embedded processors.
 
+	  This driver also supports the ML7213, a companion chip for the
+	  Atom E6xx series and compatible with the Intel EG20T PCH.
+
 config SPI_TXX9
 	tristate "Toshiba TXx9 SPI controller"
 	depends on GENERIC_GPIO && CPU_TX49XX

trunk/drivers/spi/Makefile

@@ -7,68 +7,56 @@ ccflags-$(CONFIG_SPI_DEBUG) := -DDEBUG
 # small core, mostly translating board-specific
 # config declarations into driver model code
 obj-$(CONFIG_SPI_MASTER)		+= spi.o
+obj-$(CONFIG_SPI_SPIDEV)		+= spidev.o
 
 # SPI master controller drivers (bus)
-obj-$(CONFIG_SPI_ALTERA)		+= spi_altera.o
-obj-$(CONFIG_SPI_ATMEL)			+= atmel_spi.o
-obj-$(CONFIG_SPI_ATH79)			+= ath79_spi.o
-obj-$(CONFIG_SPI_BFIN)			+= spi_bfin5xx.o
-obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi_bfin_sport.o
-obj-$(CONFIG_SPI_BITBANG)		+= spi_bitbang.o
-obj-$(CONFIG_SPI_AU1550)		+= au1550_spi.o
-obj-$(CONFIG_SPI_BUTTERFLY)		+= spi_butterfly.o
-obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= coldfire_qspi.o
-obj-$(CONFIG_SPI_DAVINCI)		+= davinci_spi.o
-obj-$(CONFIG_SPI_DESIGNWARE)		+= dw_spi.o
-obj-$(CONFIG_SPI_DW_PCI)		+= dw_spi_midpci.o
-dw_spi_midpci-objs			:= dw_spi_pci.o dw_spi_mid.o
-obj-$(CONFIG_SPI_DW_MMIO)		+= dw_spi_mmio.o
-obj-$(CONFIG_SPI_EP93XX)		+= ep93xx_spi.o
-obj-$(CONFIG_SPI_GPIO)			+= spi_gpio.o
-obj-$(CONFIG_SPI_IMX)			+= spi_imx.o
-obj-$(CONFIG_SPI_LM70_LLP)		+= spi_lm70llp.o
-obj-$(CONFIG_SPI_PXA2XX)		+= pxa2xx_spi.o
-obj-$(CONFIG_SPI_PXA2XX_PCI)		+= pxa2xx_spi_pci.o
-obj-$(CONFIG_SPI_OC_TINY)		+= spi_oc_tiny.o
-obj-$(CONFIG_SPI_OMAP_UWIRE)		+= omap_uwire.o
-obj-$(CONFIG_SPI_OMAP24XX)		+= omap2_mcspi.o
-obj-$(CONFIG_SPI_OMAP_100K)		+= omap_spi_100k.o
-obj-$(CONFIG_SPI_ORION)			+= orion_spi.o
-obj-$(CONFIG_SPI_PL022)			+= amba-pl022.o
-obj-$(CONFIG_SPI_MPC512x_PSC)		+= mpc512x_psc_spi.o
-obj-$(CONFIG_SPI_MPC52xx_PSC)		+= mpc52xx_psc_spi.o
-obj-$(CONFIG_SPI_MPC52xx)		+= mpc52xx_spi.o
-obj-$(CONFIG_SPI_FSL_LIB)		+= spi_fsl_lib.o
-obj-$(CONFIG_SPI_FSL_ESPI)		+= spi_fsl_espi.o
-obj-$(CONFIG_SPI_FSL_SPI)		+= spi_fsl_spi.o
-obj-$(CONFIG_SPI_PPC4xx)		+= spi_ppc4xx.o
-obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi_s3c24xx_gpio.o
-obj-$(CONFIG_SPI_S3C24XX)		+= spi_s3c24xx_hw.o
-obj-$(CONFIG_SPI_S3C64XX)		+= spi_s3c64xx.o
-obj-$(CONFIG_SPI_TEGRA)			+= spi_tegra.o
-obj-$(CONFIG_SPI_TI_SSP)		+= ti-ssp-spi.o
-obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi_topcliff_pch.o
-obj-$(CONFIG_SPI_TXX9)			+= spi_txx9.o
-obj-$(CONFIG_SPI_XILINX)		+= xilinx_spi.o
-obj-$(CONFIG_SPI_SH)			+= spi_sh.o
-obj-$(CONFIG_SPI_SH_SCI)		+= spi_sh_sci.o
-obj-$(CONFIG_SPI_SH_MSIOF)		+= spi_sh_msiof.o
-obj-$(CONFIG_SPI_STMP3XXX)		+= spi_stmp.o
-obj-$(CONFIG_SPI_NUC900)		+= spi_nuc900.o
+obj-$(CONFIG_SPI_ALTERA)		+= spi-altera.o
+obj-$(CONFIG_SPI_ATMEL)			+= spi-atmel.o
+obj-$(CONFIG_SPI_ATH79)			+= spi-ath79.o
+obj-$(CONFIG_SPI_AU1550)		+= spi-au1550.o
+obj-$(CONFIG_SPI_BFIN)			+= spi-bfin5xx.o
+obj-$(CONFIG_SPI_BFIN_SPORT)		+= spi-bfin-sport.o
+obj-$(CONFIG_SPI_BITBANG)		+= spi-bitbang.o
+obj-$(CONFIG_SPI_BUTTERFLY)		+= spi-butterfly.o
+obj-$(CONFIG_SPI_COLDFIRE_QSPI)		+= spi-coldfire-qspi.o
+obj-$(CONFIG_SPI_DAVINCI)		+= spi-davinci.o
+obj-$(CONFIG_SPI_DESIGNWARE)		+= spi-dw.o
+obj-$(CONFIG_SPI_DW_MMIO)		+= spi-dw-mmio.o
+obj-$(CONFIG_SPI_DW_PCI)		+= spi-dw-midpci.o
+spi-dw-midpci-objs			:= spi-dw-pci.o spi-dw-mid.o
+obj-$(CONFIG_SPI_EP93XX)		+= spi-ep93xx.o
+obj-$(CONFIG_SPI_FSL_LIB)		+= spi-fsl-lib.o
+obj-$(CONFIG_SPI_FSL_ESPI)		+= spi-fsl-espi.o
+obj-$(CONFIG_SPI_FSL_SPI)		+= spi-fsl-spi.o
+obj-$(CONFIG_SPI_GPIO)			+= spi-gpio.o
+obj-$(CONFIG_SPI_IMX)			+= spi-imx.o
+obj-$(CONFIG_SPI_LM70_LLP)		+= spi-lm70llp.o
+obj-$(CONFIG_SPI_MPC512x_PSC)		+= spi-mpc512x-psc.o
+obj-$(CONFIG_SPI_MPC52xx_PSC)		+= spi-mpc52xx-psc.o
+obj-$(CONFIG_SPI_MPC52xx)		+= spi-mpc52xx.o
+obj-$(CONFIG_SPI_NUC900)		+= spi-nuc900.o
+obj-$(CONFIG_SPI_OC_TINY)		+= spi-oc-tiny.o
+obj-$(CONFIG_SPI_OMAP_UWIRE)		+= spi-omap-uwire.o
+obj-$(CONFIG_SPI_OMAP_100K)		+= spi-omap-100k.o
+obj-$(CONFIG_SPI_OMAP24XX)		+= spi-omap2-mcspi.o
+obj-$(CONFIG_SPI_ORION)			+= spi-orion.o
+obj-$(CONFIG_SPI_PL022)			+= spi-pl022.o
+obj-$(CONFIG_SPI_PPC4xx)		+= spi-ppc4xx.o
+obj-$(CONFIG_SPI_PXA2XX)		+= spi-pxa2xx.o
+obj-$(CONFIG_SPI_PXA2XX_PCI)		+= spi-pxa2xx-pci.o
+obj-$(CONFIG_SPI_S3C24XX_GPIO)		+= spi-s3c24xx-gpio.o
+obj-$(CONFIG_SPI_S3C24XX)		+= spi-s3c24xx-hw.o
+spi-s3c24xx-hw-y			:= spi-s3c24xx.o
+spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
+obj-$(CONFIG_SPI_S3C64XX)		+= spi-s3c64xx.o
+obj-$(CONFIG_SPI_SH)			+= spi-sh.o
+obj-$(CONFIG_SPI_SH_MSIOF)		+= spi-sh-msiof.o
+obj-$(CONFIG_SPI_SH_SCI)		+= spi-sh-sci.o
+obj-$(CONFIG_SPI_STMP3XXX)		+= spi-stmp.o
+obj-$(CONFIG_SPI_TEGRA)			+= spi-tegra.o
+obj-$(CONFIG_SPI_TI_SSP)		+= spi-ti-ssp.o
+obj-$(CONFIG_SPI_TLE62X0)		+= spi-tle62x0.o
+obj-$(CONFIG_SPI_TOPCLIFF_PCH)		+= spi-topcliff-pch.o
+obj-$(CONFIG_SPI_TXX9)			+= spi-txx9.o
+obj-$(CONFIG_SPI_XILINX)		+= spi-xilinx.o
 
-# special build for s3c24xx spi driver with fiq support
-spi_s3c24xx_hw-y			:= spi_s3c24xx.o
-spi_s3c24xx_hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi_s3c24xx_fiq.o
-
-# 	... add above this line ...
-
-# SPI protocol drivers (device/link on bus)
-obj-$(CONFIG_SPI_SPIDEV)	+= spidev.o
-obj-$(CONFIG_SPI_TLE62X0)	+= tle62x0.o
-# 	... add above this line ...
-
-# SPI slave controller drivers (upstream link)
-# 	... add above this line ...
-
-# SPI slave drivers (protocol for that link)
-# 	... add above this line ...