---

yaml
---
r: 201809
b: refs/heads/master
c: 786d783
h: refs/heads/master
i:
  201807: 61db427
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c939f9f9d225972a60181c95df8a9aa50f8b1701
+refs/heads/master: 786d78318586cbdc8aec539fe5a4942490267fef

trunk/.gitignore

@@ -28,7 +28,6 @@ modules.builtin
 *.gz
 *.bz2
 *.lzma
-*.lzo
 *.patch
 *.gcno
 

trunk/Documentation/00-INDEX

@@ -32,6 +32,8 @@ DocBook/
 	- directory with DocBook templates etc. for kernel documentation.
 HOWTO
 	- the process and procedures of how to do Linux kernel development.
+IO-mapping.txt
+	- how to access I/O mapped memory from within device drivers.
 IPMI.txt
 	- info on Linux Intelligent Platform Management Interface (IPMI) Driver.
 IRQ-affinity.txt
@@ -82,8 +84,6 @@ blockdev/
 	- info on block devices & drivers
 btmrvl.txt
 	- info on Marvell Bluetooth driver usage.
-bus-virt-phys-mapping.txt
-	- how to access I/O mapped memory from within device drivers.
 cachetlb.txt
 	- describes the cache/TLB flushing interfaces Linux uses.
 cdrom/
@@ -168,8 +168,6 @@ initrd.txt
 	- how to use the RAM disk as an initial/temporary root filesystem.
 input/
 	- info on Linux input device support.
-io-mapping.txt
-	- description of io_mapping functions in linux/io-mapping.h
 io_ordering.txt
 	- info on ordering I/O writes to memory-mapped addresses.
 ioctl/

trunk/Documentation/ABI/testing/sysfs-bus-pci

@@ -133,6 +133,46 @@ Description:
 		The symbolic link points to the PCI device sysfs entry of the
 		Physical Function this device associates with.
 
+
+What:		/sys/bus/pci/slots/...
+Date:		April 2005 (possibly older)
+KernelVersion:	2.6.12 (possibly older)
+Contact:	linux-pci@vger.kernel.org
+Description:
+		When the appropriate driver is loaded, it will create a
+		directory per claimed physical PCI slot in
+		/sys/bus/pci/slots/.  The names of these directories are
+		specific to the driver, which in turn, are specific to the
+		platform, but in general, should match the label on the
+		machine's physical chassis.
+
+		The drivers that can create slot directories include the
+		PCI hotplug drivers, and as of 2.6.27, the pci_slot driver.
+
+		The slot directories contain, at a minimum, a file named
+		'address' which contains the PCI bus:device:function tuple.
+		Other files may appear as well, but are specific to the
+		driver.
+
+What:		/sys/bus/pci/slots/.../function[0-7]
+Date:		March 2010
+KernelVersion:	2.6.35
+Contact:	linux-pci@vger.kernel.org
+Description:
+		If PCI slot directories (as described above) are created,
+		and the physical slot is actually populated with a device,
+		symbolic links in the slot directory pointing to the
+		device's PCI functions are created as well.
+
+What:		/sys/bus/pci/devices/.../slot
+Date:		March 2010
+KernelVersion:	2.6.35
+Contact:	linux-pci@vger.kernel.org
+Description:
+		If PCI slot directories (as described above) are created,
+		a symbolic link pointing to the slot directory will be
+		created as well.
+
 What:		/sys/bus/pci/slots/.../module
 Date:		June 2009
 Contact:	linux-pci@vger.kernel.org

trunk/Documentation/DocBook/drm.tmpl

@@ -389,7 +389,7 @@
       </para>
       <para>
 	If your driver supports memory management (it should!), you'll
-	need to set that up at load time as well.  How you initialize
+	need to set that up at load time as well.  How you intialize
 	it depends on which memory manager you're using, TTM or GEM.
       </para>
       <sect3>
@@ -399,7 +399,7 @@
 	  aperture space for graphics devices. TTM supports both UMA devices
 	  and devices with dedicated video RAM (VRAM), i.e. most discrete
 	  graphics devices.  If your device has dedicated RAM, supporting
-	  TTM is desirable.  TTM also integrates tightly with your
+	  TTM is desireable.  TTM also integrates tightly with your
 	  driver specific buffer execution function.  See the radeon
 	  driver for examples.
 	</para>
@@ -443,7 +443,7 @@
 	  likely eventually calling ttm_bo_global_init and
 	  ttm_bo_global_release, respectively.  Also like the previous
 	  object, ttm_global_item_ref is used to create an initial reference
-	  count for the TTM, which will call your initialization function.
+	  count for the TTM, which will call your initalization function.
 	</para>
       </sect3>
       <sect3>
@@ -557,7 +557,7 @@ void intel_crt_init(struct drm_device *dev)
 	  CRT connector and encoder combination is created.  A device
 	  specific i2c bus is also created, for fetching EDID data and
 	  performing monitor detection.  Once the process is complete,
-	  the new connector is registered with sysfs, to make its
+	  the new connector is regsitered with sysfs, to make its
 	  properties available to applications.
 	</para>
 	<sect4>
@@ -581,12 +581,12 @@ void intel_crt_init(struct drm_device *dev)
 	<para>
 	  For each encoder, CRTC and connector, several functions must
 	  be provided, depending on the object type.  Encoder objects
-	  need to provide a DPMS (basically on/off) function, mode fixup
+	  need should provide a DPMS (basically on/off) function, mode fixup
 	  (for converting requested modes into native hardware timings),
 	  and prepare, set and commit functions for use by the core DRM
 	  helper functions.  Connector helpers need to provide mode fetch and
 	  validity functions as well as an encoder matching function for
-	  returning an ideal encoder for a given connector.  The core
+	  returing an ideal encoder for a given connector.  The core
 	  connector functions include a DPMS callback, (deprecated)
 	  save/restore routines, detection, mode probing, property handling,
 	  and cleanup functions.

trunk/Documentation/DocBook/v4l/v4l2.xml

@@ -58,7 +58,7 @@ MPEG stream embedded, sliced VBI data format in this specification.
 </contrib>
 	<affiliation>
 	  <address>
-	    <email>awalls@md.metrocast.net</email>
+	    <email>awalls@radix.net</email>
 	  </address>
 	</affiliation>
       </author>

trunk/Documentation/DocBook/v4l/vidioc-query-dv-preset.xml

@@ -53,10 +53,8 @@ input</refpurpose>
 automatically, similar to sensing the video standard. To do so, applications
 call <constant> VIDIOC_QUERY_DV_PRESET</constant> with a pointer to a
 &v4l2-dv-preset; type. Once the hardware detects a preset, that preset is
-returned in the preset field of &v4l2-dv-preset;. If the preset could not be
-detected because there was no signal, or the signal was unreliable, or the
-signal did not map to a supported preset, then the value V4L2_DV_INVALID is
-returned.</para>
+returned in the preset field of &v4l2-dv-preset;. When detection is not
+possible or fails, the value V4L2_DV_INVALID is returned.</para>
   </refsect1>
 
   <refsect1>

trunk/Documentation/arm/memory.txt

@@ -33,13 +33,7 @@ ffff0000	ffff0fff	CPU vector page.
 
 fffe0000	fffeffff	XScale cache flush area.  This is used
 				in proc-xscale.S to flush the whole data
-				cache. (XScale does not have TCM.)
-
-fffe8000	fffeffff	DTCM mapping area for platforms with
-				DTCM mounted inside the CPU.
-
-fffe0000	fffe7fff	ITCM mapping area for platforms with
-				ITCM mounted inside the CPU.
+				cache.  Free for other usage on non-XScale.
 
 fff00000	fffdffff	Fixmap mapping region.  Addresses provided
 				by fix_to_virt() will be located here.

trunk/Documentation/arm/tcm.txt

@@ -19,8 +19,8 @@ defines a CPUID_TCM register that you can read out from the
 system control coprocessor. Documentation from ARM can be found
 at http://infocenter.arm.com, search for "TCM Status Register"
 to see documents for all CPUs. Reading this register you can
-determine if ITCM (bits 1-0) and/or DTCM (bit 17-16) is present
-in the machine.
+determine if ITCM (bit 0) and/or DTCM (bit 16) is present in the
+machine.
 
 There is further a TCM region register (search for "TCM Region
 Registers" at the ARM site) that can report and modify the location
@@ -35,15 +35,7 @@ The TCM memory can then be remapped to another address again using
 the MMU, but notice that the TCM if often used in situations where
 the MMU is turned off. To avoid confusion the current Linux
 implementation will map the TCM 1 to 1 from physical to virtual
-memory in the location specified by the kernel. Currently Linux
-will map ITCM to 0xfffe0000 and on, and DTCM to 0xfffe8000 and
-on, supporting a maximum of 32KiB of ITCM and 32KiB of DTCM.
-
-Newer versions of the region registers also support dividing these
-TCMs in two separate banks, so for example an 8KiB ITCM is divided
-into two 4KiB banks with its own control registers. The idea is to
-be able to lock and hide one of the banks for use by the secure
-world (TrustZone).
+memory in the location specified by the machine.
 
 TCM is used for a few things:
 
@@ -73,18 +65,18 @@ in <asm/tcm.h>. Using this interface it is possible to:
   memory. Such a heap is great for things like saving
   device state when shutting off device power domains.
 
-A machine that has TCM memory shall select HAVE_TCM from
-arch/arm/Kconfig for itself. Code that needs to use TCM shall
-#include <asm/tcm.h>
+A machine that has TCM memory shall select HAVE_TCM in
+arch/arm/Kconfig for itself, and then the
+rest of the functionality will depend on the physical
+location and size of ITCM and DTCM to be defined in
+mach/memory.h for the machine. Code that needs to use
+TCM shall #include <asm/tcm.h> If the TCM is not located
+at the place given in memory.h it will be moved using
+the TCM Region registers.
 
 Functions to go into itcm can be tagged like this:
 int __tcmfunc foo(int bar);
 
-Since these are marked to become long_calls and you may want
-to have functions called locally inside the TCM without
-wasting space, there is also the __tcmlocalfunc prefix that
-will make the call relative.
-
 Variables to go into dtcm can be tagged like this:
 int __tcmdata foo;
 

trunk/Documentation/credentials.txt

@@ -417,9 +417,6 @@ reference on them using:
 This does all the RCU magic inside of it.  The caller must call put_cred() on
 the credentials so obtained when they're finished with.
 
- [*] Note: The result of __task_cred() should not be passed directly to
-     get_cred() as this may race with commit_cred().
-
 There are a couple of convenience functions to access bits of another task's
 credentials, hiding the RCU magic from the caller: