---

yaml
---
r: 1117
b: refs/heads/master
c: d3f0fce
h: refs/heads/master
i:
  1115: 0a50bec
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c8920ba041c8934b29370f5d62ab9ea8f147966b
+refs/heads/master: d3f0fcec2d50a18a84c4f3dd7683206ed37ca009

trunk/arch/arm/mach-s3c2410/clock.c

@@ -478,7 +478,7 @@ static int s3c2440_clk_add(struct sys_device *sysdev)
 {
 	unsigned long upllcon = __raw_readl(S3C2410_UPLLCON);
 
-	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate) * 2;
+	s3c2440_clk_upll.rate = s3c2410_get_pll(upllcon, clk_xtal.rate);
 
 	printk("S3C2440: Clock Support, UPLL %ld.%03ld MHz\n",
 	       print_mhz(s3c2440_clk_upll.rate));

trunk/arch/arm/mach-s3c2410/s3c2440.c

@@ -192,9 +192,11 @@ void __init s3c2440_map_io(struct map_desc *mach_desc, int size)
 
 	iotable_init(s3c2440_iodesc, ARRAY_SIZE(s3c2440_iodesc));
 	iotable_init(mach_desc, size);
+
 	/* rename any peripherals used differing from the s3c2410 */
 
-	s3c_device_i2c.name = "s3c2440-i2c";
+	s3c_device_i2c.name  = "s3c2440-i2c";
+	s3c_device_nand.name = "s3c2440-nand";
 
 	/* change irq for watchdog */
 
@@ -225,7 +227,7 @@ void __init s3c2440_init_clocks(int xtal)
 		break;
 
 	case S3C2440_CLKDIVN_HDIVN_2:
-		hdiv = 1;
+		hdiv = 2;
 		break;
 
 	case S3C2440_CLKDIVN_HDIVN_4_8:

trunk/arch/arm/mm/Kconfig

@@ -412,21 +412,20 @@ config CPU_BPREDICT_DISABLE
 
 config TLS_REG_EMUL
 	bool
-	default y if (SMP || CPU_32v6) && (CPU_32v5 || CPU_32v4 || CPU_32v3)
+	default y if SMP && (CPU_32v5 || CPU_32v4 || CPU_32v3)
 	help
-	  We might be running on an ARMv6+ processor which should have the TLS
-	  register but for some reason we can't use it, or maybe an SMP system
-	  using a pre-ARMv6 processor (there are apparently a few prototypes
-	  like that in existence) and therefore access to that register must
-	  be emulated.
+	  An SMP system using a pre-ARMv6 processor (there are apparently
+	  a few prototypes like that in existence) and therefore access to
+	  that required register must be emulated.
 
 config HAS_TLS_REG
 	bool
-	depends on CPU_32v6
-	default y if !TLS_REG_EMUL
+	depends on !TLS_REG_EMUL
+	default y if SMP || CPU_32v7
 	help
 	  This selects support for the CP15 thread register.
-	  It is defined to be available on ARMv6 or later.  If a particular
-	  ARMv6 or later CPU doesn't support it then it must omc;ide "select
-	  TLS_REG_EMUL" along with its other caracteristics.
+	  It is defined to be available on some ARMv6 processors (including
+	  all SMP capable ARMv6's) or later processors.  User space may
+	  assume directly accessing that register and always obtain the
+	  expected value only on ARMv7 and above.
 

trunk/arch/arm/mm/copypage-v4mc.c

@@ -0,0 +1,111 @@
+/*
+ *  linux/arch/arm/lib/copypage-armv4mc.S
+ *
+ *  Copyright (C) 1995-2005 Russell King
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This handles the mini data cache, as found on SA11x0 and XScale
+ * processors.  When we copy a user page page, we map it in such a way
+ * that accesses to this page will not touch the main data cache, but
+ * will be cached in the mini data cache.  This prevents us thrashing
+ * the main data cache on page faults.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+
+#include <asm/page.h>
+#include <asm/pgtable.h>
+#include <asm/tlbflush.h>
+
+/*
+ * 0xffff8000 to 0xffffffff is reserved for any ARM architecture
+ * specific hacks for copying pages efficiently.
+ */
+#define minicache_pgprot __pgprot(L_PTE_PRESENT | L_PTE_YOUNG | \
+				  L_PTE_CACHEABLE)
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static DEFINE_SPINLOCK(minicache_lock);
+
+/*
+ * ARMv4 mini-dcache optimised copy_user_page
+ *
+ * We flush the destination cache lines just before we write the data into the
+ * corresponding address.  Since the Dcache is read-allocate, this removes the
+ * Dcache aliasing issue.  The writes will be forwarded to the write buffer,
+ * and merged as appropriate.
+ *
+ * Note: We rely on all ARMv4 processors implementing the "invalidate D line"
+ * instruction.  If your processor does not supply this, you have to write your
+ * own copy_user_page that does the right thing.
+ */
+static void __attribute__((naked))
+mc_copy_user_page(void *from, void *to)
+{
+	asm volatile(
+	"stmfd	sp!, {r4, lr}			@ 2\n\
+	mov	r4, %2				@ 1\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+1:	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4+1\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, %1, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	subs	r4, r4, #1			@ 1\n\
+	stmia	%1!, {r2, r3, ip, lr}		@ 4\n\
+	ldmneia	%0!, {r2, r3, ip, lr}		@ 4\n\
+	bne	1b				@ 1\n\
+	ldmfd	sp!, {r4, pc}			@ 3"
+	:
+	: "r" (from), "r" (to), "I" (PAGE_SIZE / 64));
+}
+
+void v4_mc_copy_user_page(void *kto, const void *kfrom, unsigned long vaddr)
+{
+	spin_lock(&minicache_lock);
+
+	set_pte(TOP_PTE(0xffff8000), pfn_pte(__pa(kfrom) >> PAGE_SHIFT, minicache_pgprot));
+	flush_tlb_kernel_page(0xffff8000);
+
+	mc_copy_user_page((void *)0xffff8000, kto);
+
+	spin_unlock(&minicache_lock);
+}
+
+/*
+ * ARMv4 optimised clear_user_page
+ */
+void __attribute__((naked))
+v4_mc_clear_user_page(void *kaddr, unsigned long vaddr)
+{
+	asm volatile(
+	"str	lr, [sp, #-4]!\n\
+	mov	r1, %0				@ 1\n\
+	mov	r2, #0				@ 1\n\
+	mov	r3, #0				@ 1\n\
+	mov	ip, #0				@ 1\n\
+	mov	lr, #0				@ 1\n\
+1:	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	mcr	p15, 0, r0, c7, c6, 1		@ 1   invalidate D line\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	stmia	r0!, {r2, r3, ip, lr}		@ 4\n\
+	subs	r1, r1, #1			@ 1\n\
+	bne	1b				@ 1\n\
+	ldr	pc, [sp], #4"
+	:
+	: "I" (PAGE_SIZE / 64));
+}
+
+struct cpu_user_fns v4_mc_user_fns __initdata = {
+	.cpu_clear_user_page	= v4_mc_clear_user_page, 
+	.cpu_copy_user_page	= v4_mc_copy_user_page,
+};

trunk/arch/arm/mm/copypage-v6.c

@@ -26,8 +26,8 @@
 #define to_address	(0xffffc000)
 #define to_pgprot	PAGE_KERNEL
 
-static pte_t *from_pte;
-static pte_t *to_pte;
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
 static DEFINE_SPINLOCK(v6_lock);
 
 #define DCACHE_COLOUR(vaddr) ((vaddr & (SHMLBA - 1)) >> PAGE_SHIFT)
@@ -74,8 +74,8 @@ void v6_copy_user_page_aliasing(void *kto, const void *kfrom, unsigned long vadd
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(from_pte + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
-	set_pte(to_pte + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(from_address) + offset, pfn_pte(__pa(kfrom) >> PAGE_SHIFT, from_pgprot));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kto) >> PAGE_SHIFT, to_pgprot));
 
 	from = from_address + (offset << PAGE_SHIFT);
 	to   = to_address + (offset << PAGE_SHIFT);
@@ -114,7 +114,7 @@ void v6_clear_user_page_aliasing(void *kaddr, unsigned long vaddr)
 	 */
 	spin_lock(&v6_lock);
 
-	set_pte(to_pte + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
+	set_pte(TOP_PTE(to_address) + offset, pfn_pte(__pa(kaddr) >> PAGE_SHIFT, to_pgprot));
 	flush_tlb_kernel_page(to);
 	clear_page((void *)to);
 
@@ -129,27 +129,11 @@ struct cpu_user_fns v6_user_fns __initdata = {
 static int __init v6_userpage_init(void)
 {
 	if (cache_is_vipt_aliasing()) {
-		pgd_t *pgd;
-		pmd_t *pmd;
-
-		pgd = pgd_offset_k(from_address);
-		pmd = pmd_alloc(&init_mm, pgd, from_address);
-		if (!pmd)
-			BUG();
-		from_pte = pte_alloc_kernel(&init_mm, pmd, from_address);
-		if (!from_pte)
-			BUG();
-
-		to_pte = pte_alloc_kernel(&init_mm, pmd, to_address);
-		if (!to_pte)
-			BUG();
-
 		cpu_user.cpu_clear_user_page = v6_clear_user_page_aliasing;
 		cpu_user.cpu_copy_user_page = v6_copy_user_page_aliasing;
 	}
 
 	return 0;
 }
 
-__initcall(v6_userpage_init);
-
+core_initcall(v6_userpage_init);

trunk/arch/arm/mm/flush.c

@@ -13,6 +13,29 @@
 
 #include <asm/cacheflush.h>
 #include <asm/system.h>
+#include <asm/tlbflush.h>
+
+#ifdef CONFIG_CPU_CACHE_VIPT
+#define ALIAS_FLUSH_START	0xffff4000
+
+#define TOP_PTE(x)	pte_offset_kernel(top_pmd, x)
+
+static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
+{
+	unsigned long to = ALIAS_FLUSH_START + (CACHE_COLOUR(vaddr) << PAGE_SHIFT);
+
+	set_pte(TOP_PTE(to), pfn_pte(pfn, PAGE_KERNEL));
+	flush_tlb_kernel_page(to);
+
+	asm(	"mcrr	p15, 0, %1, %0, c14\n"
+	"	mcrr	p15, 0, %1, %0, c5\n"
+	    :
+	    : "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES)
+	    : "cc");
+}
+#else
+#define flush_pfn_alias(pfn,vaddr)	do { } while (0)
+#endif
 
 static void __flush_dcache_page(struct address_space *mapping, struct page *page)
 {
@@ -36,6 +59,18 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
 	if (!mapping)
 		return;
 
+	/*
+	 * This is a page cache page.  If we have a VIPT cache, we
+	 * only need to do one flush - which would be at the relevant
+	 * userspace colour, which is congruent with page->index.
+	 */
+	if (cache_is_vipt()) {
+		if (cache_is_vipt_aliasing())
+			flush_pfn_alias(page_to_pfn(page),
+					page->index << PAGE_CACHE_SHIFT);
+		return;
+	}
+
 	/*
 	 * There are possible user space mappings of this page:
 	 * - VIVT cache: we need to also write back and invalidate all user
@@ -57,8 +92,6 @@ static void __flush_dcache_page(struct address_space *mapping, struct page *page
 			continue;
 		offset = (pgoff - mpnt->vm_pgoff) << PAGE_SHIFT;
 		flush_cache_page(mpnt, mpnt->vm_start + offset, page_to_pfn(page));
-		if (cache_is_vipt())
-			break;
 	}
 	flush_dcache_mmap_unlock(mapping);
 }