---

yaml
---
r: 299231
b: refs/heads/master
c: 4bea8b5
h: refs/heads/master
i:
  299229: 5283cc5
  299227: 85f48dd
  299223: 0f5b4b0
  299215: 3bedca9
  299199: 0eed670
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 2084c24a81413b75bc97e4bee56b32ffece70460
+refs/heads/master: 4bea8b5cf8c6e875fa43e617cd52858a07ae8ea8

trunk/Documentation/ABI/stable/sysfs-driver-usb-usbtmc

@@ -1,5 +1,5 @@
-What:		/sys/bus/usb/drivers/usbtmc/*/interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/*/device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -12,8 +12,8 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/*/usb488_interface_capabilities
-What:		/sys/bus/usb/drivers/usbtmc/*/usb488_device_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_interface_capabilities
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/usb488_device_capabilities
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -27,7 +27,7 @@ Description:
 		The files are read only.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/*/TermChar
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermChar
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -40,7 +40,7 @@ Description:
 		sent to the device or not.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/*/TermCharEnabled
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/TermCharEnabled
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
@@ -51,11 +51,11 @@ Description:
 		published by the USB-IF.
 
 
-What:		/sys/bus/usb/drivers/usbtmc/*/auto_abort
+What:		/sys/bus/usb/drivers/usbtmc/devices/*/auto_abort
 Date:		August 2008
 Contact:	Greg Kroah-Hartman <gregkh@linuxfoundation.org>
 Description:
-		This file determines if the transaction of the USB TMC
+		This file determines if the the transaction of the USB TMC
 		device is to be automatically aborted if there is any error.
 		For more details about this, please see the document,
 		"Universal Serial Bus Test and Measurement Class Specification

trunk/Documentation/ABI/testing/sysfs-driver-samsung-laptop

@@ -17,21 +17,3 @@ Description:	Some Samsung laptops have different "performance levels"
 		Specifically, not all support the "overclock" option,
 		and it's still unknown if this value even changes
 		anything, other than making the user feel a bit better.
-
-What:		/sys/devices/platform/samsung/battery_life_extender
-Date:		December 1, 2011
-KernelVersion:	3.3
-Contact:	Corentin Chary <corentin.chary@gmail.com>
-Description:	Max battery charge level can be modified, battery cycle
-		life can be extended by reducing the max battery charge
-		level.
-		0 means normal battery mode (100% charge)
-		1 means battery life extender mode (80% charge)
-
-What:		/sys/devices/platform/samsung/usb_charge
-Date:		December 1, 2011
-KernelVersion:	3.3
-Contact:	Corentin Chary <corentin.chary@gmail.com>
-Description:	Use your USB ports to charge devices, even
-		when your laptop is powered off.
-		1 means enabled, 0 means disabled.

trunk/Documentation/ABI/testing/sysfs-firmware-acpi

@@ -1,23 +1,3 @@
-What:		/sys/firmware/acpi/bgrt/
-Date:		January 2012
-Contact:	Matthew Garrett <mjg@redhat.com>
-Description:
-		The BGRT is an ACPI 5.0 feature that allows the OS
-		to obtain a copy of the firmware boot splash and
-		some associated metadata. This is intended to be used
-		by boot splash applications in order to interact with
-		the firmware boot splash in order to avoid jarring
-		transitions.
-
-		image: The image bitmap. Currently a 32-bit BMP.
-		status: 1 if the image is valid, 0 if firmware invalidated it.
-		type: 0 indicates image is in BMP format.
-		version: The version of the BGRT. Currently 1.
-		xoffset: The number of pixels between the left of the screen
-			 and the left edge of the image.
-		yoffset: The number of pixels between the top of the screen
-			 and the top edge of the image.
-
 What:		/sys/firmware/acpi/interrupts/
 Date:		February 2008
 Contact:	Len Brown <lenb@kernel.org>

trunk/Documentation/CodingStyle

@@ -793,35 +793,6 @@ own custom mode, or may have some other magic method for making indentation
 work correctly.
 
 
-		Chapter 19:  Inline assembly
-
-In architecture-specific code, you may need to use inline assembly to interface
-with CPU or platform functionality.  Don't hesitate to do so when necessary.
-However, don't use inline assembly gratuitously when C can do the job.  You can
-and should poke hardware from C when possible.
-
-Consider writing simple helper functions that wrap common bits of inline
-assembly, rather than repeatedly writing them with slight variations.  Remember
-that inline assembly can use C parameters.
-
-Large, non-trivial assembly functions should go in .S files, with corresponding
-C prototypes defined in C header files.  The C prototypes for assembly
-functions should use "asmlinkage".
-
-You may need to mark your asm statement as volatile, to prevent GCC from
-removing it if GCC doesn't notice any side effects.  You don't always need to
-do so, though, and doing so unnecessarily can limit optimization.
-
-When writing a single inline assembly statement containing multiple
-instructions, put each instruction on a separate line in a separate quoted
-string, and end each string except the last with \n\t to properly indent the
-next instruction in the assembly output:
-
-	asm ("magic %reg1, #42\n\t"
-	     "more_magic %reg2, %reg3"
-	     : /* outputs */ : /* inputs */ : /* clobbers */);
-
-
 
 		Appendix I: References
 

trunk/Documentation/DMA-attributes.txt

@@ -31,21 +31,3 @@ may be weakly ordered, that is that reads and writes may pass each other.
 Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
 those that do not will simply ignore the attribute and exhibit default
 behavior.
-
-DMA_ATTR_WRITE_COMBINE
-----------------------
-
-DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be
-buffered to improve performance.
-
-Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE,
-those that do not will simply ignore the attribute and exhibit default
-behavior.
-
-DMA_ATTR_NON_CONSISTENT
------------------------
-
-DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either
-consistent or non-consistent memory as it sees fit.  By using this API,
-you are guaranteeing to the platform that you have all the correct and
-necessary sync points for this memory in the driver.

trunk/Documentation/DocBook/device-drivers.tmpl

@@ -446,21 +446,4 @@ X!Idrivers/video/console/fonts.c
 !Edrivers/i2c/i2c-core.c
   </chapter>
 
-  <chapter id="hsi">
-     <title>High Speed Synchronous Serial Interface (HSI)</title>
-
-     <para>
-	High Speed Synchronous Serial Interface (HSI) is a
-	serial interface mainly used for connecting application
-	engines (APE) with cellular modem engines (CMT) in cellular
-	handsets.
-
-	HSI provides multiplexing for up to 16 logical channels,
-	low-latency and full duplex communication.
-     </para>
-
-!Iinclude/linux/hsi/hsi.h
-!Edrivers/hsi/hsi.c
-  </chapter>
-
 </book>

trunk/Documentation/Makefile

@@ -1,3 +1,3 @@
 obj-m := DocBook/ accounting/ auxdisplay/ connector/ \
 	filesystems/ filesystems/configfs/ ia64/ laptops/ networking/ \
-	pcmcia/ spi/ timers/ watchdog/src/
+	pcmcia/ spi/ timers/ vm/ watchdog/src/

trunk/Documentation/acpi/apei/einj.txt

@@ -53,14 +53,6 @@ directory apei/einj. The following files are provided.
   This file is used to set the second error parameter value. Effect of
   parameter depends on error_type specified.
 
-- notrigger
-  The EINJ mechanism is a two step process. First inject the error, then
-  perform some actions to trigger it. Setting "notrigger" to 1 skips the
-  trigger phase, which *may* allow the user to cause the error in some other
-  context by a simple access to the cpu, memory location, or device that is
-  the target of the error injection. Whether this actually works depends
-  on what operations the BIOS actually includes in the trigger phase.
-
 BIOS versions based in the ACPI 4.0 specification have limited options
 to control where the errors are injected.  Your BIOS may support an
 extension (enabled with the param_extension=1 module parameter, or

trunk/Documentation/aoe/aoe.txt

@@ -35,7 +35,7 @@ CREATING DEVICE NODES
     sh Documentation/aoe/mkshelf.sh /dev/etherd 0
 
   There is also an autoload script that shows how to edit
-  /etc/modprobe.d/aoe.conf to ensure that the aoe module is loaded when
+  /etc/modprobe.conf to ensure that the aoe module is loaded when
   necessary.
 
 USING DEVICE NODES

trunk/Documentation/aoe/autoload.sh

@@ -1,8 +1,8 @@
 #!/bin/sh
 # set aoe to autoload by installing the
-# aliases in /etc/modprobe.d/
+# aliases in /etc/modprobe.conf
 
-f=/etc/modprobe.d/aoe.conf
+f=/etc/modprobe.conf
 
 if test ! -r $f || test ! -w $f; then
 	echo "cannot configure $f for module autoloading" 1>&2

trunk/Documentation/blockdev/floppy.txt

@@ -49,7 +49,7 @@ you can put:
 
  options floppy omnibook messages
 
-in a configuration file in /etc/modprobe.d/.
+in /etc/modprobe.conf.
 
 
  The floppy driver related options are:

trunk/Documentation/cgroups/cpusets.txt

@@ -217,7 +217,7 @@ and name space for cpusets, with a minimum of additional kernel code.
 
 The cpus and mems files in the root (top_cpuset) cpuset are
 read-only.  The cpus file automatically tracks the value of
-cpu_online_mask using a CPU hotplug notifier, and the mems file
+cpu_online_map using a CPU hotplug notifier, and the mems file
 automatically tracks the value of node_states[N_HIGH_MEMORY]--i.e.,
 nodes with memory--using the cpuset_track_online_nodes() hook.