---

yaml
---
r: 112349
b: refs/heads/master
c: 6a4690c
h: refs/heads/master
i:
  112347: af02040
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 8ec53663d2698076468b3e1edc4e1b418bd54de3
+refs/heads/master: 6a4690c22f5da1eb1c898b61b6a80da52fbd976f

trunk/arch/arm/Kconfig

@@ -148,7 +148,6 @@ config ARCH_MAY_HAVE_PC_FDC
 
 config ZONE_DMA
 	bool
-	default y
 
 config GENERIC_ISA_DMA
 	bool
@@ -178,6 +177,11 @@ config OPROFILE_MPCORE
 config OPROFILE_ARM11_CORE
 	bool
 
+config OPROFILE_ARMV7
+	def_bool y
+	depends on CPU_V7 && !SMP
+	bool
+
 endif
 
 config VECTORS_BASE
@@ -245,6 +249,7 @@ config ARCH_CLPS7500
 	select TIMER_ACORN
 	select ISA
 	select NO_IOPORT
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  Support for the Cirrus Logic PS7500FE system-on-a-chip.
 
@@ -306,6 +311,7 @@ config ARCH_IOP13XX
 	select PLAT_IOP
 	select PCI
 	select ARCH_SUPPORTS_MSI
+	select VMSPLIT_1G
 	help
 	  Support for Intel's IOP13XX (XScale) family of processors.
 
@@ -350,6 +356,7 @@ config ARCH_IXP4XX
 	select GENERIC_GPIO
 	select GENERIC_TIME
 	select GENERIC_CLOCKEVENTS
+	select ZONE_DMA if PCI
 	help
 	  Support for Intel's IXP4XX (XScale) family of processors.
 
@@ -464,16 +471,15 @@ config ARCH_RPC
 	select HAVE_PATA_PLATFORM
 	select ISA_DMA_API
 	select NO_IOPORT
+	select ARCH_SPARSEMEM_ENABLE
 	help
 	  On the Acorn Risc-PC, Linux can support the internal IDE disk and
 	  CD-ROM interface, serial and parallel port, and the floppy drive.
 
 config ARCH_SA1100
 	bool "SA1100-based"
 	select ISA
-	select ARCH_DISCONTIGMEM_ENABLE
 	select ARCH_SPARSEMEM_ENABLE
-	select ARCH_SELECT_MEMORY_MODEL
 	select ARCH_MTD_XIP
 	select GENERIC_GPIO
 	select GENERIC_TIME
@@ -497,13 +503,16 @@ config ARCH_SHARK
 	bool "Shark"
 	select ISA
 	select ISA_DMA
+	select ZONE_DMA
 	select PCI
 	help
 	  Support for the StrongARM based Digital DNARD machine, also known
 	  as "Shark" (<http://www.shark-linux.de/shark.html>).
 
 config ARCH_LH7A40X
 	bool "Sharp LH7A40X"
+	select ARCH_DISCONTIGMEM_ENABLE if !LH7A40X_CONTIGMEM
+	select ARCH_SPARSEMEM_ENABLE if !LH7A40X_CONTIGMEM
 	help
 	  Say Y here for systems based on one of the Sharp LH7A40X
 	  System on a Chip processors.  These CPUs include an ARM922T
@@ -516,6 +525,7 @@ config ARCH_DAVINCI
 	select GENERIC_CLOCKEVENTS
 	select GENERIC_GPIO
 	select HAVE_CLK
+	select ZONE_DMA
 	help
 	  Support for TI's DaVinci platform.
 
@@ -734,6 +744,29 @@ config SMP
 
 	  If you don't know what to do here, say N.
 
+choice
+	prompt "Memory split"
+	default VMSPLIT_3G
+	help
+	  Select the desired split between kernel and user memory.
+
+	  If you are not absolutely sure what you are doing, leave this
+	  option alone!
+
+	config VMSPLIT_3G
+		bool "3G/1G user/kernel split"
+	config VMSPLIT_2G
+		bool "2G/2G user/kernel split"
+	config VMSPLIT_1G
+		bool "1G/3G user/kernel split"
+endchoice
+
+config PAGE_OFFSET
+	hex
+	default 0x40000000 if VMSPLIT_1G
+	default 0x80000000 if VMSPLIT_2G
+	default 0xC0000000
+
 config NR_CPUS
 	int "Maximum number of CPUs (2-32)"
 	range 2 32
@@ -815,20 +848,18 @@ config ARCH_FLATMEM_HAS_HOLES
 	default y
 	depends on FLATMEM
 
+# Discontigmem is deprecated
 config ARCH_DISCONTIGMEM_ENABLE
 	bool
-	default (ARCH_LH7A40X && !LH7A40X_CONTIGMEM)
-	help
-	  Say Y to support efficient handling of discontiguous physical memory,
-	  for architectures which are either NUMA (Non-Uniform Memory Access)
-	  or have huge holes in the physical address space for other reasons.
-	  See <file:Documentation/vm/numa> for more.
 
 config ARCH_SPARSEMEM_ENABLE
 	bool
 
+config ARCH_SPARSEMEM_DEFAULT
+	def_bool ARCH_SPARSEMEM_ENABLE
+
 config ARCH_SELECT_MEMORY_MODEL
-	bool
+	def_bool ARCH_DISCONTIGMEM_ENABLE && ARCH_SPARSEMEM_ENABLE
 
 config NODES_SHIFT
 	int
@@ -1005,9 +1036,9 @@ config ATAGS_PROC
 
 endmenu
 
-if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
+menu "CPU Power Management"
 
-menu "CPU Frequency scaling"
+if (ARCH_SA1100 || ARCH_INTEGRATOR || ARCH_OMAP || ARCH_IMX || ARCH_PXA)
 
 source "drivers/cpufreq/Kconfig"
 
@@ -1047,10 +1078,12 @@ config CPU_FREQ_PXA
 	default y
 	select CPU_FREQ_DEFAULT_GOV_USERSPACE
 
-endmenu
-
 endif
 
+source "drivers/cpuidle/Kconfig"
+
+endmenu
+
 menu "Floating point emulation"
 
 comment "At least one emulation must be selected"
@@ -1202,6 +1235,8 @@ source "drivers/power/Kconfig"
 
 source "drivers/hwmon/Kconfig"
 
+source "drivers/thermal/Kconfig"
+
 source "drivers/watchdog/Kconfig"
 
 source "drivers/ssb/Kconfig"
@@ -1222,6 +1257,10 @@ source "drivers/usb/Kconfig"
 
 source "drivers/mmc/Kconfig"
 
+source "drivers/memstick/Kconfig"
+
+source "drivers/accessibility/Kconfig"
+
 source "drivers/leds/Kconfig"
 
 source "drivers/rtc/Kconfig"
@@ -1230,6 +1269,8 @@ source "drivers/dma/Kconfig"
 
 source "drivers/dca/Kconfig"
 
+source "drivers/auxdisplay/Kconfig"
+
 source "drivers/regulator/Kconfig"
 
 source "drivers/uio/Kconfig"

trunk/arch/arm/Makefile

@@ -47,7 +47,7 @@ comma = ,
 # Note that GCC does not numerically define an architecture version
 # macro, but instead defines a whole series of macros which makes
 # testing for a specific architecture or later rather impossible.
-arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7a,-march=armv5t -Wa$(comma)-march=armv7a)
+arch-$(CONFIG_CPU_32v7)		:=-D__LINUX_ARM_ARCH__=7 $(call cc-option,-march=armv7-a,-march=armv5t -Wa$(comma)-march=armv7-a)
 arch-$(CONFIG_CPU_32v6)		:=-D__LINUX_ARM_ARCH__=6 $(call cc-option,-march=armv6,-march=armv5t -Wa$(comma)-march=armv6)
 # Only override the compiler option if ARMv6. The ARMv6K extensions are
 # always available in ARMv7

trunk/arch/arm/boot/compressed/Makefile

@@ -76,7 +76,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 EXTRA_CFLAGS  := -fpic -fno-builtin
-EXTRA_AFLAGS  :=
+EXTRA_AFLAGS  := -Wa,-march=all
 
 # Supply ZRELADDR, INITRD_PHYS and PARAMS_PHYS to the decompressor via
 # linker symbols.  We only define initrd_phys and params_phys if the

trunk/arch/arm/boot/compressed/head.S

@@ -421,6 +421,7 @@ __setup_mmu:	sub	r3, r4, #16384		@ Page directory size
 		add	r1, r1, #1048576
 		str	r1, [r0]
 		mov	pc, lr
+ENDPROC(__setup_mmu)
 
 __armv4_mmu_cache_on:
 		mov	r12, lr
@@ -801,7 +802,7 @@ loop1:
 		add	r2, r2, #4		@ add 4 (line length offset)
 		ldr	r4, =0x3ff
 		ands	r4, r4, r1, lsr #3	@ find maximum number on the way size
-		.word	0xe16f5f14		@ clz r5, r4 - find bit position of way size increment
+		clz	r5, r4			@ find bit position of way size increment
 		ldr	r7, =0x7fff
 		ands	r7, r7, r1, lsr #13	@ extract max number of the index size
 loop2:

trunk/arch/arm/common/Kconfig

@@ -12,7 +12,8 @@ config ICST307
 
 config SA1111
 	bool
-	select DMABOUNCE
+	select DMABOUNCE if !ARCH_PXA
+	select ZONE_DMA if !ARCH_PXA
 
 config DMABOUNCE
 	bool