[SCSI] bfa: Add diagnostic port (D-Port) support

- Introduced support for D-Port which is a new port mode during which
  link level diagnostics can be run.
- Provided mechanism to dynamically configure D-Port and initiate diagnostic
  tests to isolate any link level issues.
- In D-Port mode, the HBA port does not participate in fabric or login to the
  remote device or run data traffic.
- Diagnostic tests include running various loopback tests in conjunction with
  the attached device.

Signed-off-by: Krishna Gudipati <kgudipat@brocade.com>
Signed-off-by: James Bottomley <JBottomley@Parallels.com>

drivers/scsi/bfa/bfa_defs.h

@@ -165,6 +165,7 @@ enum bfa_status {
 	BFA_STATUS_MEMTEST_FAILED = 90, /* Memory test failed contact support */
 	BFA_STATUS_LEDTEST_OP = 109, /* LED test is operating */
 	BFA_STATUS_INVALID_MAC  = 134, /*  Invalid MAC address */
+	BFA_STATUS_CMD_NOTSUPP_CNA = 146, /* Command not supported for CNA */
 	BFA_STATUS_PBC		= 154, /*  Operation not allowed for pre-boot
 					*  configuration */
 	BFA_STATUS_BAD_FWCFG = 156,	/* Bad firmware configuration */
@@ -189,6 +190,10 @@ enum bfa_status {
 	BFA_STATUS_TOPOLOGY_LOOP = 230, /* Topology is set to Loop */
 	BFA_STATUS_LOOP_UNSUPP_MEZZ = 231, /* Loop topology is not supported
 					    * on mezz cards */
+	BFA_STATUS_DPORT_ENABLED = 235, /* D-port mode is already enabled */
+	BFA_STATUS_DPORT_DISABLED = 236, /* D-port mode is already disabled */
+	BFA_STATUS_CMD_NOTSUPP_MEZZ = 239, /* Cmd not supported for MEZZ card */
+	BFA_STATUS_DPORT_ERR = 245,	/* D-port mode is enabled */
 	BFA_STATUS_MAX_VAL		/* Unknown error code */
 };
 #define bfa_status_t enum bfa_status
@@ -507,6 +512,17 @@ struct bfa_ioc_aen_data_s {
 	mac_t	mac;
 };
 
+/*
+ *	D-port states
+ *
+*/
+enum bfa_dport_state {
+	BFA_DPORT_ST_DISABLED	= 0,	/* D-port is Disabled */
+	BFA_DPORT_ST_DISABLING	= 1,	/* D-port is Disabling */
+	BFA_DPORT_ST_ENABLING	= 2,	/* D-port is Enabling */
+	BFA_DPORT_ST_ENABLED	= 3,	/* D-port is Enabled */
+};
+
 /*
  * ---------------------- mfg definitions ------------
  */

drivers/scsi/bfa/bfa_defs_svc.h

@@ -722,6 +722,7 @@ enum bfa_port_states {
 	BFA_PORT_ST_PREBOOT_DISABLED	= 13,
 	BFA_PORT_ST_TOGGLING_QWAIT	= 14,
 	BFA_PORT_ST_ACQ_ADDR		= 15,
+	BFA_PORT_ST_DPORT		= 16,
 	BFA_PORT_ST_MAX_STATE,
 };
 

drivers/scsi/bfa/bfa_port.c

@@ -250,6 +250,12 @@ bfa_port_enable(struct bfa_port_s *port, bfa_port_endis_cbfn_t cbfn,
 		return BFA_STATUS_IOC_FAILURE;
 	}
 
+	/* if port is d-port enabled, return error */
+	if (port->dport_enabled) {
+		bfa_trc(port, BFA_STATUS_DPORT_ERR);
+		return BFA_STATUS_DPORT_ERR;
+	}
+
 	if (port->endis_pending) {
 		bfa_trc(port, BFA_STATUS_DEVBUSY);
 		return BFA_STATUS_DEVBUSY;
@@ -300,6 +306,12 @@ bfa_port_disable(struct bfa_port_s *port, bfa_port_endis_cbfn_t cbfn,
 		return BFA_STATUS_IOC_FAILURE;
 	}
 
+	/* if port is d-port enabled, return error */
+	if (port->dport_enabled) {
+		bfa_trc(port, BFA_STATUS_DPORT_ERR);
+		return BFA_STATUS_DPORT_ERR;
+	}
+
 	if (port->endis_pending) {
 		bfa_trc(port, BFA_STATUS_DEVBUSY);
 		return BFA_STATUS_DEVBUSY;
@@ -431,6 +443,10 @@ bfa_port_notify(void *arg, enum bfa_ioc_event_e event)
 			port->endis_cbfn = NULL;
 			port->endis_pending = BFA_FALSE;
 		}
+
+		/* clear D-port mode */
+		if (port->dport_enabled)
+			bfa_port_set_dportenabled(port, BFA_FALSE);
 		break;
 	default:
 		break;
@@ -467,6 +483,7 @@ bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
 	port->stats_cbfn = NULL;
 	port->endis_cbfn = NULL;
 	port->pbc_disabled = BFA_FALSE;
+	port->dport_enabled = BFA_FALSE;
 
 	bfa_ioc_mbox_regisr(port->ioc, BFI_MC_PORT, bfa_port_isr, port);
 	bfa_q_qe_init(&port->ioc_notify);
@@ -482,6 +499,21 @@ bfa_port_attach(struct bfa_port_s *port, struct bfa_ioc_s *ioc,
 	bfa_trc(port, 0);
 }
 
+/*
+ * bfa_port_set_dportenabled();
+ *
+ * Port module- set pbc disabled flag
+ *
+ * @param[in] port - Pointer to the Port module data structure
+ *
+ * @return void
+ */
+void
+bfa_port_set_dportenabled(struct bfa_port_s *port, bfa_boolean_t enabled)
+{
+	port->dport_enabled = enabled;
+}
+
 /*
  *	CEE module specific definitions
  */

drivers/scsi/bfa/bfa_port.h

@@ -45,6 +45,7 @@ struct bfa_port_s {
 	bfa_status_t			endis_status;
 	struct bfa_ioc_notify_s		ioc_notify;
 	bfa_boolean_t			pbc_disabled;
+	bfa_boolean_t			dport_enabled;
 	struct bfa_mem_dma_s		port_dma;
 };
 
@@ -66,6 +67,8 @@ bfa_status_t bfa_port_disable(struct bfa_port_s *port,
 u32     bfa_port_meminfo(void);
 void	     bfa_port_mem_claim(struct bfa_port_s *port,
 				 u8 *dma_kva, u64 dma_pa);
+void	bfa_port_set_dportenabled(struct bfa_port_s *port,
+				  bfa_boolean_t enabled);
 
 /*
  * CEE declaration