---

yaml
---
r: 275685
b: refs/heads/master
c: 3b971a7
h: refs/heads/master
i:
  275683: 390ebb0
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: e29ec6247053ad60bd0b36f155b647364a615097
+refs/heads/master: 3b971a7ceb2e39e0cab95c079c738b2052b3e02f

trunk/Documentation/ABI/stable/sysfs-acpi-pmprofile

@@ -0,0 +1,22 @@
+What: 		/sys/firmware/acpi/pm_profile
+Date:		03-Nov-2011
+KernelVersion:	v3.2
+Contact:	linux-acpi@vger.kernel.org
+Description: 	The ACPI pm_profile sysfs interface exports the platform
+		power management (and performance) requirement expectations
+		as provided by BIOS. The integer value is directly passed as
+		retrieved from the FADT ACPI table.
+Values:         For possible values see ACPI specification:
+		5.2.9 Fixed ACPI Description Table (FADT)
+		Field: Preferred_PM_Profile
+
+		Currently these values are defined by spec:
+		0 Unspecified
+		1 Desktop
+		2 Mobile
+		3 Workstation
+		4 Enterprise Server
+		5 SOHO Server
+		6 Appliance PC
+		7 Performance Server
+		>7 Reserved

trunk/Documentation/ABI/testing/sysfs-bus-pci-devices-cciss

@@ -71,3 +71,10 @@ Description:	Value of 1 indicates the controller can honor the reset_devices
 		a dump device, as kdump requires resetting the device in order
 		to work reliably.
 
+Where:		/sys/bus/pci/devices/<dev>/ccissX/transport_mode
+Date:		July 2011
+Kernel Version:	3.0
+Contact:	iss_storagedev@hp.com
+Description:	Value of "simple" indicates that the controller has been placed
+		in "simple mode". Value of "performant" indicates that the
+		controller has been placed in "performant mode".

trunk/Documentation/DocBook/mtdnand.tmpl

@@ -572,7 +572,7 @@ static void board_select_chip (struct mtd_info *mtd, int chip)
 			</para>
 			<para>
 				The simplest way to activate the FLASH based bad block table support 
-				is to set the option NAND_USE_FLASH_BBT in the option field of
+				is to set the option NAND_BBT_USE_FLASH in the bbt_option field of
 				the nand chip structure before calling nand_scan(). For AG-AND
 				chips is this done by default.
 				This activates the default FLASH based bad block table functionality 
@@ -773,20 +773,6 @@ struct nand_oobinfo {
 				done according to the default builtin scheme.
 			</para>
 		</sect2>
-		<sect2 id="User_space_placement_selection">
-			<title>User space placement selection</title>
-		<para>
-			All non ecc functions like mtd->read and mtd->write use an internal 
-			structure, which can be set by an ioctl. This structure is preset 
-			to the autoplacement default.
-	     		<programlisting>
-	ioctl (fd, MEMSETOOBSEL, oobsel);
-	     		</programlisting>
-			oobsel is a pointer to a user supplied structure of type
-			nand_oobconfig. The contents of this structure must match the 
-			criteria of the filesystem, which will be used. See an example in utils/nandwrite.c.
-		</para>
-		</sect2>
 	</sect1>	
 	<sect1 id="Spare_area_autoplacement_default">
 		<title>Spare area autoplacement default schemes</title>
@@ -1158,9 +1144,6 @@ in this page</entry>
 		These constants are defined in nand.h. They are ored together to describe
 		the functionality.
      		<programlisting>
-/* Use a flash based bad block table. This option is parsed by the
- * default bad block table function (nand_default_bbt). */
-#define NAND_USE_FLASH_BBT	0x00010000
 /* The hw ecc generator provides a syndrome instead a ecc value on read 
  * This can only work if we have the ecc bytes directly behind the 
  * data bytes. Applies for DOC and AG-AND Renesas HW Reed Solomon generators */

trunk/Documentation/blockdev/cciss.txt

@@ -78,6 +78,16 @@ The device naming scheme is:
 /dev/cciss/c1d1p2		Controller 1, disk 1, partition 2
 /dev/cciss/c1d1p3		Controller 1, disk 1, partition 3
 
+CCISS simple mode support
+-------------------------
+
+The "cciss_simple_mode=1" boot parameter may be used to prevent the driver
+from putting the controller into "performant" mode. The difference is that
+with simple mode, each command completion requires an interrupt, while with
+"performant mode" (the default, and ordinarily better performing) it is
+possible to have multiple command completions indicated by a single
+interrupt.
+
 SCSI tape drive and medium changer support
 ------------------------------------------
 

trunk/Documentation/devicetree/bindings/mtd/atmel-dataflash.txt

@@ -0,0 +1,14 @@
+* Atmel Data Flash
+
+Required properties:
+- compatible : "atmel,<model>", "atmel,<series>", "atmel,dataflash".
+
+Example:
+
+flash@1 {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "atmel,at45db321d", "atmel,at45", "atmel,dataflash";
+	spi-max-frequency = <25000000>;
+	reg = <1>;
+};

trunk/Documentation/devicetree/bindings/powerpc/fsl/board.txt

@@ -1,3 +1,8 @@
+Freescale Reference Board Bindings
+
+This document describes device tree bindings for various devices that
+exist on some Freescale reference boards.
+
 * Board Control and Status (BCSR)
 
 Required properties:
@@ -12,25 +17,26 @@ Example:
 		reg = <f8000000 8000>;
 	};
 
-* Freescale on board FPGA
+* Freescale on-board FPGA
 
 This is the memory-mapped registers for on board FPGA.
 
 Required properities:
-- compatible : should be "fsl,fpga-pixis".
-- reg : should contain the address and the length of the FPPGA register
-  set.
+- compatible: should be a board-specific string followed by a string
+  indicating the type of FPGA.  Example:
+	"fsl,<board>-fpga", "fsl,fpga-pixis"
+- reg: should contain the address and the length of the FPGA register set.
 - interrupt-parent: should specify phandle for the interrupt controller.
-- interrupts : should specify event (wakeup) IRQ.
+- interrupts: should specify event (wakeup) IRQ.
 
-Example (MPC8610HPCD):
+Example (P1022DS):
 
-	board-control@e8000000 {
-		compatible = "fsl,fpga-pixis";
-		reg = <0xe8000000 32>;
-		interrupt-parent = <&mpic>;
-		interrupts = <8 8>;
-	};
+	 board-control@3,0 {
+		 compatible = "fsl,p1022ds-fpga", "fsl,fpga-ngpixis";
+		 reg = <3 0 0x30>;
+		 interrupt-parent = <&mpic>;
+		 interrupts = <8 8 0 0>;
+	 };
 
 * Freescale BCSR GPIO banks