Merge tag 'for-usb-next-2012-04-08' of git://git.kernel.org/pub/scm/l…

…inux/kernel/git/sarah/xhci into usb-next

Sarah writes:

	xHCI misc cleanup patches for 3.10

	Hi Greg,

	Here's three cleanup patches for 3.10.  Nothing big here, just some debugging
	output changes, a macro rename, and a math macro change that should have no
	behavioral effects.

	Tested on the Intel Panther Point xHCI host, with USB storage and mouse, with
	xHCI debugging turned on.  I don't have the TI host that causes the debugging
	output changes to trigger.

	Sarah Sharp

drivers/usb/host/xhci-mem.c

@@ -51,7 +51,7 @@ static struct xhci_segment *xhci_segment_alloc(struct xhci_hcd *xhci,
 		return NULL;
 	}
 
-	memset(seg->trbs, 0, SEGMENT_SIZE);
+	memset(seg->trbs, 0, TRB_SEGMENT_SIZE);
 	/* If the cycle state is 0, set the cycle bit to 1 for all the TRBs */
 	if (cycle_state == 0) {
 		for (i = 0; i < TRBS_PER_SEGMENT; i++)
@@ -467,7 +467,7 @@ struct xhci_ring *xhci_dma_to_transfer_ring(
 {
 	if (ep->ep_state & EP_HAS_STREAMS)
 		return radix_tree_lookup(&ep->stream_info->trb_address_map,
-				address >> SEGMENT_SHIFT);
+				address >> TRB_SEGMENT_SHIFT);
 	return ep->ring;
 }
 
@@ -478,7 +478,7 @@ static struct xhci_ring *dma_to_stream_ring(
 		u64 address)
 {
 	return radix_tree_lookup(&stream_info->trb_address_map,
-			address >> SEGMENT_SHIFT);
+			address >> TRB_SEGMENT_SHIFT);
 }
 #endif	/* CONFIG_USB_XHCI_HCD_DEBUGGING */
 
@@ -514,7 +514,7 @@ static int xhci_test_radix_tree(struct xhci_hcd *xhci,
 
 		cur_ring = stream_info->stream_rings[cur_stream];
 		for (addr = cur_ring->first_seg->dma;
-				addr < cur_ring->first_seg->dma + SEGMENT_SIZE;
+				addr < cur_ring->first_seg->dma + TRB_SEGMENT_SIZE;
 				addr += trb_size) {
 			mapped_ring = dma_to_stream_ring(stream_info, addr);
 			if (cur_ring != mapped_ring) {
@@ -662,7 +662,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 				cur_stream, (unsigned long long) addr);
 
 		key = (unsigned long)
-			(cur_ring->first_seg->dma >> SEGMENT_SHIFT);
+			(cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT);
 		ret = radix_tree_insert(&stream_info->trb_address_map,
 				key, cur_ring);
 		if (ret) {
@@ -693,7 +693,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci,
 		if (cur_ring) {
 			addr = cur_ring->first_seg->dma;
 			radix_tree_delete(&stream_info->trb_address_map,
-					addr >> SEGMENT_SHIFT);
+					addr >> TRB_SEGMENT_SHIFT);
 			xhci_ring_free(xhci, cur_ring);
 			stream_info->stream_rings[cur_stream] = NULL;
 		}
@@ -764,7 +764,7 @@ void xhci_free_stream_info(struct xhci_hcd *xhci,
 		if (cur_ring) {
 			addr = cur_ring->first_seg->dma;
 			radix_tree_delete(&stream_info->trb_address_map,
-					addr >> SEGMENT_SHIFT);
+					addr >> TRB_SEGMENT_SHIFT);
 			xhci_ring_free(xhci, cur_ring);
 			stream_info->stream_rings[cur_stream] = NULL;
 		}
@@ -2305,7 +2305,7 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags)
 	 * so we pick the greater alignment need.
 	 */
 	xhci->segment_pool = dma_pool_create("xHCI ring segments", dev,
-			SEGMENT_SIZE, 64, xhci->page_size);
+			TRB_SEGMENT_SIZE, 64, xhci->page_size);
 
 	/* See Table 46 and Note on Figure 55 */
 	xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev,

drivers/usb/host/xhci.c

@@ -417,9 +417,9 @@ static void compliance_mode_recovery(unsigned long arg)
 			 * Compliance Mode Detected. Letting USB Core
 			 * handle the Warm Reset
 			 */
-			xhci_dbg(xhci, "Compliance Mode Detected->Port %d!\n",
+			xhci_dbg(xhci, "Compliance mode detected->port %d\n",
 					i + 1);
-			xhci_dbg(xhci, "Attempting Recovery routine!\n");
+			xhci_dbg(xhci, "Attempting compliance mode recovery\n");
 			hcd = xhci->shared_hcd;
 
 			if (hcd->state == HC_STATE_SUSPENDED)
@@ -457,7 +457,7 @@ static void compliance_mode_recovery_timer_init(struct xhci_hcd *xhci)
 	set_timer_slack(&xhci->comp_mode_recovery_timer,
 			msecs_to_jiffies(COMP_MODE_RCVRY_MSECS));
 	add_timer(&xhci->comp_mode_recovery_timer);
-	xhci_dbg(xhci, "Compliance Mode Recovery Timer Initialized.\n");
+	xhci_dbg(xhci, "Compliance mode recovery timer initialized\n");
 }
 
 /*
@@ -733,8 +733,11 @@ void xhci_stop(struct usb_hcd *hcd)
 
 	/* Deleting Compliance Mode Recovery Timer */
 	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
-			(!(xhci_all_ports_seen_u0(xhci))))
+			(!(xhci_all_ports_seen_u0(xhci)))) {
 		del_timer_sync(&xhci->comp_mode_recovery_timer);
+		xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n",
+				__func__);
+	}
 
 	if (xhci->quirks & XHCI_AMD_PLL_FIX)
 		usb_amd_dev_put();
@@ -930,7 +933,8 @@ int xhci_suspend(struct xhci_hcd *xhci)
 	if ((xhci->quirks & XHCI_COMP_MODE_QUIRK) &&
 			(!(xhci_all_ports_seen_u0(xhci)))) {
 		del_timer_sync(&xhci->comp_mode_recovery_timer);
-		xhci_dbg(xhci, "Compliance Mode Recovery Timer Deleted!\n");
+		xhci_dbg(xhci, "%s: compliance mode recovery timer deleted\n",
+				__func__);
 	}
 
 	/* step 5: remove core well power */

drivers/usb/host/xhci.h

@@ -1238,8 +1238,8 @@ union xhci_trb {
 #define TRBS_PER_SEGMENT	64
 /* Allow two commands + a link TRB, along with any reserved command TRBs */
 #define MAX_RSVD_CMD_TRBS	(TRBS_PER_SEGMENT - 3)
-#define SEGMENT_SIZE		(TRBS_PER_SEGMENT*16)
-#define SEGMENT_SHIFT		(__ffs(SEGMENT_SIZE))
+#define TRB_SEGMENT_SIZE	(TRBS_PER_SEGMENT*16)
+#define TRB_SEGMENT_SHIFT	(ilog2(TRB_SEGMENT_SIZE))
 /* TRB buffer pointers can't cross 64KB boundaries */
 #define TRB_MAX_BUFF_SHIFT		16
 #define TRB_MAX_BUFF_SIZE	(1 << TRB_MAX_BUFF_SHIFT)