[SCSI] qla2xxx: Use port number to compute nvram/vpd parameter offsets.

Read adapter's physical port number from interrupt pin register
and use it instead of pci function number to offset into the
nvram to obtain the port's configuration parameters.

Signed-off-by: Anirban Chakraborty <anirban.chakraborty@qlogic.com>
Signed-off-by: Andrew Vasquez <andrew.vasquez@qlogic.com>
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>

drivers/scsi/qla2xxx/qla_def.h

@@ -2222,6 +2222,7 @@ struct qla_hw_data {
 		uint32_t	fce_enabled		:1;
 		uint32_t	fac_supported		:1;
 		uint32_t	chip_reset_done		:1;
+		uint32_t	port0			:1;
 	} flags;
 
 	/* This spinlock is used to protect "io transactions", you must
@@ -2256,6 +2257,9 @@ struct qla_hw_data {
 #define FLOGI_MID_SUPPORT       BIT_10
 #define FLOGI_VSAN_SUPPORT      BIT_12
 #define FLOGI_SP_SUPPORT        BIT_13
+
+	uint8_t		port_no;		/* Physical port of adapter */
+
 	/* Timeout timers. */
 	uint8_t 	loop_down_abort_time;    /* port down timer */
 	atomic_t	loop_down_timer;         /* loop down timer */

drivers/scsi/qla2xxx/qla_init.c

@@ -3573,14 +3573,15 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 	nv = ha->nvram;
 
 	/* Determine NVRAM starting address. */
-	ha->nvram_size = sizeof(struct nvram_24xx);
-	ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
-	ha->vpd_size = FA_NVRAM_VPD_SIZE;
-	ha->vpd_base = FA_NVRAM_VPD0_ADDR;
-	if (PCI_FUNC(ha->pdev->devfn)) {
+	if (ha->flags.port0) {
+		ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+		ha->vpd_base = FA_NVRAM_VPD0_ADDR;
+	} else {
 		ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
 		ha->vpd_base = FA_NVRAM_VPD1_ADDR;
 	}
+	ha->nvram_size = sizeof(struct nvram_24xx);
+	ha->vpd_size = FA_NVRAM_VPD_SIZE;
 
 	/* Get VPD data into cache */
 	ha->vpd = ha->nvram + VPD_OFFSET;
@@ -3619,7 +3620,7 @@ qla24xx_nvram_config(scsi_qla_host_t *vha)
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->hard_address = __constant_cpu_to_le16(124);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -4348,7 +4349,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
 		nv->exchange_count = __constant_cpu_to_le16(0);
 		nv->port_name[0] = 0x21;
-		nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+		nv->port_name[1] = 0x00 + ha->port_no;
 		nv->port_name[2] = 0x00;
 		nv->port_name[3] = 0xe0;
 		nv->port_name[4] = 0x8b;
@@ -4382,7 +4383,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		nv->enode_mac[2] = 0x03;
 		nv->enode_mac[3] = 0x04;
 		nv->enode_mac[4] = 0x05;
-		nv->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		nv->enode_mac[5] = 0x06 + ha->port_no;
 
 		rval = 1;
 	}
@@ -4415,7 +4416,7 @@ qla81xx_nvram_config(scsi_qla_host_t *vha)
 		icb->enode_mac[2] = 0x03;
 		icb->enode_mac[3] = 0x04;
 		icb->enode_mac[4] = 0x05;
-		icb->enode_mac[5] = 0x06 + PCI_FUNC(ha->pdev->devfn);
+		icb->enode_mac[5] = 0x06 + ha->port_no;
 	}
 
 	/* Use extended-initialization control block. */

drivers/scsi/qla2xxx/qla_os.c

@@ -1581,6 +1581,13 @@ qla2x00_set_isp_flags(struct qla_hw_data *ha)
 		ha->fw_srisc_address = RISC_START_ADDRESS_2400;
 		break;
 	}
+
+	/* Get adapter physical port no from interrupt pin register. */
+	pci_read_config_byte(ha->pdev, PCI_INTERRUPT_PIN, &ha->port_no);
+	if (ha->port_no & 1)
+		ha->flags.port0 = 1;
+	else
+		ha->flags.port0 = 0;
 }
 
 static int

drivers/scsi/qla2xxx/qla_sup.c

@@ -702,30 +702,30 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 			break;
 		case FLT_REG_VPD_0:
 			ha->flt_region_vpd_nvram = start;
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_VPD_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_vpd = start;
 			break;
 		case FLT_REG_NVRAM_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_NVRAM_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_nvram = start;
 			break;
 		case FLT_REG_FDT:
 			ha->flt_region_fdt = start;
 			break;
 		case FLT_REG_NPIV_CONF_0:
-			if (!(PCI_FUNC(ha->pdev->devfn) & 1))
+			if (ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
 		case FLT_REG_NPIV_CONF_1:
-			if (PCI_FUNC(ha->pdev->devfn) & 1)
+			if (!ha->flags.port0)
 				ha->flt_region_npiv_conf = start;
 			break;
 		}
@@ -745,12 +745,12 @@ qla2xxx_get_flt_info(scsi_qla_host_t *vha, uint32_t flt_addr)
 	ha->flt_region_fw = def_fw[def];
 	ha->flt_region_boot = def_boot[def];
 	ha->flt_region_vpd_nvram = def_vpd_nvram[def];
-	ha->flt_region_vpd = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_vpd = ha->flags.port0 ?
 	    def_vpd0[def]: def_vpd1[def];
-	ha->flt_region_nvram = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_nvram = ha->flags.port0 ?
 	    def_nvram0[def]: def_nvram1[def];
 	ha->flt_region_fdt = def_fdt[def];
-	ha->flt_region_npiv_conf = !(PCI_FUNC(ha->pdev->devfn) & 1) ?
+	ha->flt_region_npiv_conf = ha->flags.port0 ?
 	    def_npiv_conf0[def]: def_npiv_conf1[def];
 done:
 	DEBUG2(qla_printk(KERN_DEBUG, ha, "FLT[%s]: boot=0x%x fw=0x%x "