[POWERPC] Remove APUS support from arch/ppc

Current status of APUS:
- arch/powerpc/: removed in 2.6.23
- arch/ppc/: marked BROKEN since 2 years

This therefore removes the remaining parts of APUS support from
arch/ppc, include/asm-ppc, arch/powerpc and include/asm-powerpc.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/ppc/Kconfig

@@ -573,24 +573,9 @@ choice
 
 	  Select PReP if configuring for a PReP machine.
 
-	  Select Gemini if configuring for a Synergy Microsystems' Gemini
-	  series Single Board Computer.  More information is available at:
-	  <http://www.synergymicro.com/PressRel/97_10_15.html>.
-
-	  Select APUS if configuring for a PowerUP Amiga.  More information is
-	  available at: <http://linux-apus.sourceforge.net/>.
-
 config PPC_PREP
 	bool "PReP"
 
-config APUS
-	bool "Amiga-APUS"
-	depends on BROKEN
-	help
-	  Select APUS if configuring for a PowerUP Amiga.
-	  More information is available at:
-	  <http://linux-apus.sourceforge.net/>.
-
 config KATANA
 	bool "Artesyn-Katana"
 	help
@@ -1027,132 +1012,6 @@ config CMDLINE
 	  some command-line options at build time by entering them here.  In
 	  most cases you will need to specify the root device here.
 
-config AMIGA
-	bool
-	depends on APUS
-	default y
-	help
-	  This option enables support for the Amiga series of computers.
-
-config ZORRO
-	bool
-	depends on APUS
-	default y
-	help
-	  This enables support for the Zorro bus in the Amiga. If you have
-	  expansion cards in your Amiga that conform to the Amiga
-	  AutoConfig(tm) specification, say Y, otherwise N. Note that even
-	  expansion cards that do not fit in the Zorro slots but fit in e.g.
-	  the CPU slot may fall in this category, so you have to say Y to let
-	  Linux use these.
-
-config ABSTRACT_CONSOLE
-	bool
-	depends on APUS
-	default y
-
-config APUS_FAST_EXCEPT
-	bool
-	depends on APUS
-	default y
-
-config AMIGA_PCMCIA
-	bool "Amiga 1200/600 PCMCIA support"
-	depends on APUS && EXPERIMENTAL
-	help
-	  Include support in the kernel for pcmcia on Amiga 1200 and Amiga
-	  600. If you intend to use pcmcia cards say Y; otherwise say N.
-
-config AMIGA_BUILTIN_SERIAL
-	tristate "Amiga builtin serial support"
-	depends on APUS
-	help
-	  If you want to use your Amiga's built-in serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
-config GVPIOEXT
-	tristate "GVP IO-Extender support"
-	depends on APUS
-	help
-	  If you want to use a GVP IO-Extender serial card in Linux, say Y.
-	  Otherwise, say N.
-
-config GVPIOEXT_LP
-	tristate "GVP IO-Extender parallel printer support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable driving a printer from the parallel port on your
-	  GVP IO-Extender card, N otherwise.
-
-config GVPIOEXT_PLIP
-	tristate "GVP IO-Extender PLIP support"
-	depends on GVPIOEXT
-	help
-	  Say Y to enable doing IP over the parallel port on your GVP
-	  IO-Extender card, N otherwise.
-
-config MULTIFACE_III_TTY
-	tristate "Multiface Card III serial support"
-	depends on APUS
-	help
-	  If you want to use a Multiface III card's serial port in Linux,
-	  answer Y.
-
-	  To compile this driver as a module, choose M here.
-
-config A2232
-	tristate "Commodore A2232 serial support (EXPERIMENTAL)"
-	depends on EXPERIMENTAL && APUS
-	---help---
-	  This option supports the 2232 7-port serial card shipped with the
-	  Amiga 2000 and other Zorro-bus machines, dating from 1989.  At
-	  a max of 19,200 bps, the ports are served by a 6551 ACIA UART chip
-	  each, plus a 8520 CIA, and a master 6502 CPU and buffer as well. The
-	  ports were connected with 8 pin DIN connectors on the card bracket,
-	  for which 8 pin to DB25 adapters were supplied. The card also had
-	  jumpers internally to toggle various pinning configurations.
-
-	  This driver can be built as a module; but then "generic_serial"
-	  will also be built as a module. This has to be loaded before
-	  "ser_a2232". If you want to do this, answer M here.
-
-config WHIPPET_SERIAL
-	tristate "Hisoft Whippet PCMCIA serial support"
-	depends on AMIGA_PCMCIA
-	help
-	  HiSoft has a web page at <http://www.hisoft.co.uk/>, but there
-	  is no listing for the Whippet in their Amiga section.
-
-config APNE
-	tristate "PCMCIA NE2000 support"
-	depends on AMIGA_PCMCIA
-	help
-	  If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
-	  say N.
-
-	  To compile this driver as a module, choose M here: the
-	  module will be called apne.
-
-config SERIAL_CONSOLE
-	bool "Support for serial port console"
-	depends on APUS && (AMIGA_BUILTIN_SERIAL=y || GVPIOEXT=y || MULTIFACE_III_TTY=y)
-
-config HEARTBEAT
-	bool "Use power LED as a heartbeat"
-	depends on APUS
-	help
-	  Use the power-on LED on your machine as a load meter.  The exact
-	  behavior is platform-dependent, but normally the flash frequency is
-	  a hyperbolic function of the 5-minute load average.
-
-config PROC_HARDWARE
-	bool "/proc/hardware support"
-	depends on APUS
-
-source "drivers/zorro/Kconfig"
-
 if !44x || BROKEN
 source kernel/power/Kconfig
 endif
@@ -1227,8 +1086,7 @@ config MCA
 
 config PCI
 	bool "PCI support" if 40x || CPM2 || 83xx || 85xx || PPC_MPC52xx
-	default y if !40x && !CPM2 && !8xx && !APUS && !83xx && !85xx
-	default PCI_PERMEDIA if !4xx && !CPM2 && !8xx && APUS
+	default y if !40x && !CPM2 && !8xx && !83xx && !85xx
 	default PCI_QSPAN if !4xx && !CPM2 && 8xx
 	help
 	  Find out whether your system includes a PCI bus. PCI is the name of
@@ -1284,10 +1142,6 @@ config 8260_PCI9_IDMA4
 
 endchoice
 
-config PCI_PERMEDIA
-	bool "PCI for Permedia2"
-	depends on !4xx && !8xx && APUS
-
 source "drivers/pci/Kconfig"
 
 source "drivers/pcmcia/Kconfig"

arch/ppc/Makefile

@@ -69,7 +69,6 @@ core-$(CONFIG_83xx)		+= arch/ppc/platforms/83xx/
 core-$(CONFIG_85xx)		+= arch/ppc/platforms/85xx/
 core-$(CONFIG_MATH_EMULATION)	+= arch/powerpc/math-emu/
 core-$(CONFIG_XMON)		+= arch/ppc/xmon/
-core-$(CONFIG_APUS)		+= arch/ppc/amiga/
 drivers-$(CONFIG_8xx)		+= arch/ppc/8xx_io/
 drivers-$(CONFIG_4xx)		+= arch/ppc/4xx_io/
 drivers-$(CONFIG_CPM2)		+= arch/ppc/8260_io/