Merge branch 'topic/asoc' into for-linus

arch/arm/mach-davinci/board-da830-evm.c

@@ -208,7 +208,7 @@ static struct snd_platform_data da830_evm_snd_data = {
 	.num_serializer = ARRAY_SIZE(da830_iis_serializer_direction),
 	.tdm_slots      = 2,
 	.serial_dir     = da830_iis_serializer_direction,
-	.eventq_no      = EVENTQ_0,
+	.asp_chan_q     = EVENTQ_0,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,

arch/arm/mach-davinci/board-da850-evm.c

@@ -343,7 +343,7 @@ static struct snd_platform_data da850_evm_snd_data = {
 	.num_serializer	= ARRAY_SIZE(da850_iis_serializer_direction),
 	.tdm_slots	= 2,
 	.serial_dir	= da850_iis_serializer_direction,
-	.eventq_no	= EVENTQ_1,
+	.asp_chan_q	= EVENTQ_1,
 	.version	= MCASP_VERSION_2,
 	.txnumevt	= 1,
 	.rxnumevt	= 1,

arch/arm/mach-davinci/board-dm646x-evm.c

@@ -323,7 +323,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.num_serializer = ARRAY_SIZE(dm646x_iis_serializer_direction),
 		.tdm_slots      = 2,
 		.serial_dir     = dm646x_iis_serializer_direction,
-		.eventq_no      = EVENTQ_0,
+		.asp_chan_q     = EVENTQ_0,
 	},
 	{
 		.tx_dma_offset  = 0x400,
@@ -332,7 +332,7 @@ static struct snd_platform_data dm646x_evm_snd_data[] = {
 		.num_serializer = ARRAY_SIZE(dm646x_dit_serializer_direction),
 		.tdm_slots      = 32,
 		.serial_dir     = dm646x_dit_serializer_direction,
-		.eventq_no      = EVENTQ_0,
+		.asp_chan_q     = EVENTQ_0,
 	},
 };
 

arch/arm/mach-davinci/include/mach/asp.h

@@ -52,7 +52,8 @@
 struct snd_platform_data {
 	u32 tx_dma_offset;
 	u32 rx_dma_offset;
-	enum dma_event_q eventq_no;	/* event queue number */
+	enum dma_event_q asp_chan_q;	/* event queue number for ASP channel */
+	enum dma_event_q ram_chan_q;	/* event queue number for RAM channel */
 	unsigned int codec_fmt;
 	/*
 	 * Allowing this is more efficient and eliminates left and right swaps
@@ -63,6 +64,49 @@ struct snd_platform_data {
 	unsigned sram_size_playback;
 	unsigned sram_size_capture;
 
+	/*
+	 * If McBSP peripheral gets the clock from an external pin,
+	 * there are three chooses, that are MCBSP_CLKX, MCBSP_CLKR
+	 * and MCBSP_CLKS.
+	 * Depending on different hardware connections it is possible
+	 * to use this setting to change the behaviour of McBSP
+	 * driver. The dm365_clk_input_pin enum is available for dm365
+	 */
+	int clk_input_pin;
+
+	/*
+	 * This flag works when both clock and FS are outputs for the cpu
+	 * and makes clock more accurate (FS is not symmetrical and the
+	 * clock is very fast.
+	 * The clock becoming faster is named
+	 * i2s continuous serial clock (I2S_SCK) and it is an externally
+	 * visible bit clock.
+	 *
+	 * first line : WordSelect
+	 * second line : ContinuousSerialClock
+	 * third line: SerialData
+	 *
+	 * SYMMETRICAL APPROACH:
+	 *   _______________________          LEFT
+	 * _|         RIGHT         |______________________|
+	 *     _   _         _   _   _   _         _   _
+	 *   _| |_| |_ x16 _| |_| |_| |_| |_ x16 _| |_| |_
+	 *     _   _         _   _   _   _         _   _
+	 *   _/ \_/ \_ ... _/ \_/ \_/ \_/ \_ ... _/ \_/ \_
+	 *    \_/ \_/       \_/ \_/ \_/ \_/       \_/ \_/
+	 *
+	 * ACCURATE CLOCK APPROACH:
+	 *   ______________          LEFT
+	 * _|     RIGHT    |_______________________________|
+	 *     _         _   _         _   _   _   _   _   _
+	 *   _| |_ x16 _| |_| |_ x16 _| |_| |_| |_| |_| |_| |
+	 *     _         _   _          _      dummy cycles
+	 *   _/ \_ ... _/ \_/ \_  ... _/ \__________________
+	 *    \_/       \_/ \_/        \_/
+	 *
+	 */
+	bool i2s_accurate_sck;
+
 	/* McASP specific fields */
 	int tdm_slots;
 	u8 op_mode;
@@ -78,6 +122,11 @@ enum {
 	MCASP_VERSION_2,	/* DA8xx/OMAPL1x */
 };
 
+enum dm365_clk_input_pin {
+	MCBSP_CLKR = 0,		/* DM365 */
+	MCBSP_CLKS,
+};
+
 #define INACTIVE_MODE	0
 #define TX_MODE		1
 #define RX_MODE		2

arch/arm/mach-ep93xx/clock.c

@@ -43,7 +43,8 @@ static unsigned long get_uart_rate(struct clk *clk);
 
 static int set_keytchclk_rate(struct clk *clk, unsigned long rate);
 static int set_div_rate(struct clk *clk, unsigned long rate);
-
+static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate);
+static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate);
 
 static struct clk clk_xtali = {
 	.rate		= EP93XX_EXT_CLK_RATE,
@@ -112,6 +113,29 @@ static struct clk clk_video = {
 	.set_rate	= set_div_rate,
 };
 
+static struct clk clk_i2s_mclk = {
+	.sw_locked	= 1,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_CLKDIV_ENABLE,
+	.set_rate	= set_div_rate,
+};
+
+static struct clk clk_i2s_sclk = {
+	.sw_locked	= 1,
+	.parent		= &clk_i2s_mclk,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
+	.set_rate	= set_i2s_sclk_rate,
+};
+
+static struct clk clk_i2s_lrclk = {
+	.sw_locked	= 1,
+	.parent		= &clk_i2s_sclk,
+	.enable_reg	= EP93XX_SYSCON_I2SCLKDIV,
+	.enable_mask	= EP93XX_SYSCON_I2SCLKDIV_SENA,
+	.set_rate	= set_i2s_lrclk_rate,
+};
+
 /* DMA Clocks */
 static struct clk clk_m2p0 = {
 	.parent		= &clk_h,
@@ -191,6 +215,9 @@ static struct clk_lookup clocks[] = {
 	INIT_CK("ep93xx-keypad",	NULL,		&clk_keypad),
 	INIT_CK("ep93xx-fb",		NULL,		&clk_video),
 	INIT_CK("ep93xx-spi.0",		NULL,		&clk_spi),
+	INIT_CK("ep93xx-i2s",		"mclk",		&clk_i2s_mclk),
+	INIT_CK("ep93xx-i2s",		"sclk",		&clk_i2s_sclk),
+	INIT_CK("ep93xx-i2s",		"lrclk",	&clk_i2s_lrclk),
 	INIT_CK(NULL,			"pwm_clk",	&clk_pwm),
 	INIT_CK(NULL,			"m2p0",		&clk_m2p0),
 	INIT_CK(NULL,			"m2p1",		&clk_m2p1),
@@ -401,6 +428,44 @@ static int set_div_rate(struct clk *clk, unsigned long rate)
 	return 0;
 }
 
+static int set_i2s_sclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned val = __raw_readl(clk->enable_reg);
+
+	if (rate == clk_i2s_mclk.rate / 2)
+		ep93xx_syscon_swlocked_write(val & ~EP93XX_I2SCLKDIV_SDIV, 
+					     clk->enable_reg);
+	else if (rate == clk_i2s_mclk.rate / 4)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_SDIV, 
+					     clk->enable_reg);
+	else
+		return -EINVAL;
+
+	clk_i2s_sclk.rate = rate;
+	return 0;
+}
+
+static int set_i2s_lrclk_rate(struct clk *clk, unsigned long rate)
+{
+	unsigned val = __raw_readl(clk->enable_reg) & 
+		~EP93XX_I2SCLKDIV_LRDIV_MASK;
+
+	if (rate == clk_i2s_sclk.rate / 32)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV32,
+					     clk->enable_reg);
+	else if (rate == clk_i2s_sclk.rate / 64)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV64,
+					     clk->enable_reg);
+	else if (rate == clk_i2s_sclk.rate / 128)
+		ep93xx_syscon_swlocked_write(val | EP93XX_I2SCLKDIV_LRDIV128,
+					     clk->enable_reg);
+	else
+		return -EINVAL;
+
+	clk_i2s_lrclk.rate = rate;
+	return 0;
+}
+
 int clk_set_rate(struct clk *clk, unsigned long rate)
 {
 	if (clk->set_rate)

arch/arm/mach-ep93xx/core.c

@@ -714,6 +714,73 @@ void ep93xx_keypad_release_gpio(struct platform_device *pdev)
 }
 EXPORT_SYMBOL(ep93xx_keypad_release_gpio);
 
+/*************************************************************************
+ * EP93xx I2S audio peripheral handling
+ *************************************************************************/
+static struct resource ep93xx_i2s_resource[] = {
+	{
+		.start	= EP93XX_I2S_PHYS_BASE,
+		.end	= EP93XX_I2S_PHYS_BASE + 0x100 - 1,
+		.flags	= IORESOURCE_MEM,
+	},
+};
+
+static struct platform_device ep93xx_i2s_device = {
+	.name		= "ep93xx-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(ep93xx_i2s_resource),
+	.resource	= ep93xx_i2s_resource,
+};
+
+void __init ep93xx_register_i2s(void)
+{
+	platform_device_register(&ep93xx_i2s_device);
+}
+
+#define EP93XX_SYSCON_DEVCFG_I2S_MASK	(EP93XX_SYSCON_DEVCFG_I2SONSSP | \
+					 EP93XX_SYSCON_DEVCFG_I2SONAC97)
+
+#define EP93XX_I2SCLKDIV_MASK		(EP93XX_SYSCON_I2SCLKDIV_ORIDE | \
+					 EP93XX_SYSCON_I2SCLKDIV_SPOL)
+
+int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config)
+{
+	unsigned val;
+
+	/* Sanity check */
+	if (i2s_pins & ~EP93XX_SYSCON_DEVCFG_I2S_MASK)
+		return -EINVAL;
+	if (i2s_config & ~EP93XX_I2SCLKDIV_MASK)
+		return -EINVAL;
+
+	/* Must have only one of I2SONSSP/I2SONAC97 set */
+	if ((i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONSSP) ==
+	    (i2s_pins & EP93XX_SYSCON_DEVCFG_I2SONAC97))
+		return -EINVAL;
+
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+	ep93xx_devcfg_set_bits(i2s_pins);
+
+	/*
+	 * This is potentially racy with the clock api for i2s_mclk, sclk and 
+	 * lrclk. Since the i2s driver is the only user of those clocks we
+	 * rely on it to prevent parallel use of this function and the 
+	 * clock api for the i2s clocks.
+	 */
+	val = __raw_readl(EP93XX_SYSCON_I2SCLKDIV);
+	val &= ~EP93XX_I2SCLKDIV_MASK;
+	val |= i2s_config;
+	ep93xx_syscon_swlocked_write(val, EP93XX_SYSCON_I2SCLKDIV);
+
+	return 0;
+}
+EXPORT_SYMBOL(ep93xx_i2s_acquire);
+
+void ep93xx_i2s_release(void)
+{
+	ep93xx_devcfg_clear_bits(EP93XX_SYSCON_DEVCFG_I2S_MASK);
+}
+EXPORT_SYMBOL(ep93xx_i2s_release);
 
 extern void ep93xx_gpio_init(void);
 

arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h

@@ -93,6 +93,7 @@
 /* APB peripherals */
 #define EP93XX_TIMER_BASE		EP93XX_APB_IOMEM(0x00010000)
 
+#define EP93XX_I2S_PHYS_BASE		EP93XX_APB_PHYS(0x00020000)
 #define EP93XX_I2S_BASE			EP93XX_APB_IOMEM(0x00020000)
 
 #define EP93XX_SECURITY_BASE		EP93XX_APB_IOMEM(0x00030000)
@@ -194,6 +195,15 @@
 #define EP93XX_SYSCON_CLKDIV_ESEL	(1<<14)
 #define EP93XX_SYSCON_CLKDIV_PSEL	(1<<13)
 #define EP93XX_SYSCON_CLKDIV_PDIV_SHIFT	8
+#define EP93XX_SYSCON_I2SCLKDIV		EP93XX_SYSCON_REG(0x8c)
+#define EP93XX_SYSCON_I2SCLKDIV_SENA	(1<<31)
+#define EP93XX_SYSCON_I2SCLKDIV_ORIDE   (1<<29)
+#define EP93XX_SYSCON_I2SCLKDIV_SPOL	(1<<19)
+#define EP93XX_I2SCLKDIV_SDIV		(1 << 16)
+#define EP93XX_I2SCLKDIV_LRDIV32	(0 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV64	(1 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV128 	(2 << 17)
+#define EP93XX_I2SCLKDIV_LRDIV_MASK 	(3 << 17)
 #define EP93XX_SYSCON_KEYTCHCLKDIV	EP93XX_SYSCON_REG(0x90)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_TSEN	(1<<31)
 #define EP93XX_SYSCON_KEYTCHCLKDIV_ADIV	(1<<16)

arch/arm/mach-ep93xx/include/mach/platform.h

@@ -55,6 +55,9 @@ void ep93xx_pwm_release_gpio(struct platform_device *pdev);
 void ep93xx_register_keypad(struct ep93xx_keypad_platform_data *data);
 int ep93xx_keypad_acquire_gpio(struct platform_device *pdev);
 void ep93xx_keypad_release_gpio(struct platform_device *pdev);
+void ep93xx_register_i2s(void);
+int ep93xx_i2s_acquire(unsigned i2s_pins, unsigned i2s_config);
+void ep93xx_i2s_release(void);
 
 void ep93xx_init_devices(void);
 extern struct sys_timer ep93xx_timer;

arch/arm/mach-ep93xx/snappercl15.c

@@ -157,6 +157,7 @@ static void __init snappercl15_init_machine(void)
 	ep93xx_register_i2c(&snappercl15_i2c_gpio_data, snappercl15_i2c_data,
 			    ARRAY_SIZE(snappercl15_i2c_data));
 	ep93xx_register_fb(&snappercl15_fb_info);
+	ep93xx_register_i2s();
 	platform_device_register(&snappercl15_nand_device);
 }
 

arch/arm/mach-kirkwood/common.c

@@ -25,6 +25,7 @@
 #include <asm/mach/time.h>
 #include <mach/kirkwood.h>
 #include <mach/bridge-regs.h>
+#include <plat/audio.h>
 #include <plat/cache-feroceon-l2.h>
 #include <plat/ehci-orion.h>
 #include <plat/mvsdio.h>
@@ -864,6 +865,42 @@ struct sys_timer kirkwood_timer = {
 	.init = kirkwood_timer_init,
 };
 
+/*****************************************************************************
+ * Audio
+ ****************************************************************************/
+static struct resource kirkwood_i2s_resources[] = {
+	[0] = {
+		.start  = AUDIO_PHYS_BASE,
+		.end    = AUDIO_PHYS_BASE + SZ_16K - 1,
+		.flags  = IORESOURCE_MEM,
+	},
+	[1] = {
+		.start  = IRQ_KIRKWOOD_I2S,
+		.end    = IRQ_KIRKWOOD_I2S,
+		.flags  = IORESOURCE_IRQ,
+	},
+};
+
+static struct kirkwood_asoc_platform_data kirkwood_i2s_data = {
+	.dram        = &kirkwood_mbus_dram_info,
+	.burst       = 128,
+};
+
+static struct platform_device kirkwood_i2s_device = {
+	.name		= "kirkwood-i2s",
+	.id		= -1,
+	.num_resources	= ARRAY_SIZE(kirkwood_i2s_resources),
+	.resource	= kirkwood_i2s_resources,
+	.dev		= {
+		.platform_data	= &kirkwood_i2s_data,
+	},
+};
+
+void __init kirkwood_audio_init(void)
+{
+	kirkwood_clk_ctrl |= CGC_AUDIO;
+	platform_device_register(&kirkwood_i2s_device);
+}
 
 /*****************************************************************************
  * General
@@ -923,6 +960,7 @@ void __init kirkwood_init(void)
 	kirkwood_spi_plat_data.tclk = kirkwood_tclk;
 	kirkwood_uart0_data[0].uartclk = kirkwood_tclk;
 	kirkwood_uart1_data[0].uartclk = kirkwood_tclk;
+	kirkwood_i2s_data.tclk = kirkwood_tclk;
 
 	/*
 	 * Disable propagation of mbus errors to the CPU local bus,

arch/arm/mach-kirkwood/common.h

@@ -17,6 +17,7 @@ struct mv_sata_platform_data;
 struct mvsdio_platform_data;
 struct mtd_partition;
 struct mtd_info;
+struct kirkwood_asoc_platform_data;
 
 /*
  * Basic Kirkwood init functions used early by machine-setup.
@@ -43,6 +44,7 @@ void kirkwood_uart0_init(void);
 void kirkwood_uart1_init(void);
 void kirkwood_nand_init(struct mtd_partition *parts, int nr_parts, int delay);
 void kirkwood_nand_init_rnb(struct mtd_partition *parts, int nr_parts, int (*dev_ready)(struct mtd_info *));
+void kirkwood_audio_init(void);
 
 extern int kirkwood_tclk;
 extern struct sys_timer kirkwood_timer;