Merge tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx i…

…nto next/dt

arm: Xilinx Zynq dt patches for v4.3

- Add ECC for Synopsys MC
- Add OCM, pushbuttons to zc702

* tag 'zynq-dt-for-4.3' of https://github.com/Xilinx/linux-xlnx:
  ARM: zynq: DT: Add zc702 pushbuttons to DT as gpio-keys
  ARM: zynq: DT: Add missing interrupt for L2 pl310
  Documentation: devicetree: Add ECC information to synopsys ddr controller
  ARM: dts: zynq: Add OCM node

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/memory-controllers/synopsys.txt

@@ -1,5 +1,9 @@
 Binding for Synopsys IntelliDDR Multi Protocol Memory Controller
 
+This controller has an optional ECC support in half-bus width (16-bit)
+configuration. The ECC controller corrects one bit error and detects
+two bit errors.
+
 Required properties:
  - compatible: Should be 'xlnx,zynq-ddrc-a05'
  - reg: Base address and size of the controllers memory area

arch/arm/boot/dts/zynq-7000.dtsi

@@ -57,7 +57,7 @@
 		regulator-always-on;
 	};
 
-	amba {
+	amba: amba {
 		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -139,6 +139,7 @@
 		L2: cache-controller@f8f02000 {
 			compatible = "arm,pl310-cache";
 			reg = <0xF8F02000 0x1000>;
+			interrupts = <0 2 4>;
 			arm,data-latency = <3 2 2>;
 			arm,tag-latency = <2 2 2>;
 			cache-unified;

arch/arm/boot/dts/zynq-zc702.dts

@@ -34,6 +34,27 @@
 		stdout-path = "serial0:115200n8";
 	};
 
+	gpio-keys {
+		compatible = "gpio-keys";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		autorepeat;
+		sw14 {
+			label = "sw14";
+			gpios = <&gpio0 12 0>;
+			linux,code = <108>; /* down */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+		sw13 {
+			label = "sw13";
+			gpios = <&gpio0 14 0>;
+			linux,code = <103>; /* up */
+			gpio-key,wakeup;
+			autorepeat;
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -50,6 +71,13 @@
 	};
 };
 
+&amba {
+	ocm: sram@fffc0000 {
+		compatible = "mmio-sram";
+		reg = <0xfffc0000 0x10000>;
+	};
+};
+
 &can0 {
 	status = "okay";
 	pinctrl-names = "default";