Merge tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org…

…/pub/scm/linux/kernel/git/tegra/linux into next/cleanup

From Stephen Warren:
ARM: tegra: implement common DMA and resets DT bindings

This series converts the Tegra DTs and drivers to use the common/
standard DMA and reset bindings, rather than custom bindings. It also
adds complete documentation for the Tegra clock bindings without
actually changing any binding definitions.

This conversion relies on a few sets of patches in branches from outside
the Tegra tree:

1) A patch to add an DMA channel request API which allows deferred probe
   to be implemented.

2) A patch to implement a common part of the of_xlate function for DMA
   controllers.

3) Some ASoC patches (which in turn rely on (1) above), which support
   deferred probe during DMA channel allocation.

4) The Tegra clock driver changes for 3.14.

Consequently, this branch is based on a merge of all of those external
branches.

In turn, this branch is or will be pulled into a few places that either
rely on features introduced here, or would otherwise conflict with the
patches:

a) Tegra's own for-3.14/powergate and for-4.14/dt branches, to avoid
   conflicts.

b) The DRM tree, which introduces new code that relies on the reset
   controller framework introduced in this branch, and to avoid
   conflicts.

* tag 'tegra-for-3.14-dmas-resets-rework' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux: (30 commits)
  spi: tegra: checking for ERR_PTR instead of NULL
  ASoC: tegra: update module reset list for Tegra124
  clk: tegra: remove bogus PCIE_XCLK
  clk: tegra: remove legacy reset APIs
  ARM: tegra: remove legacy DMA entries from DT
  ARM: tegra: remove legacy clock entries from DT
  USB: EHCI: tegra: use reset framework
  Input: tegra-kbc - use reset framework
  serial: tegra: convert to standard DMA DT bindings
  serial: tegra: use reset framework
  spi: tegra: convert to standard DMA DT bindings
  spi: tegra: use reset framework
  staging: nvec: use reset framework
  i2c: tegra: use reset framework
  ASoC: tegra: convert to standard DMA DT bindings
  ASoC: tegra: allocate AHUB FIFO during probe() not startup()
  ASoC: tegra: call pm_runtime APIs around register accesses
  ASoC: tegra: use reset framework
  dma: tegra: register as an OF DMA controller
  dma: tegra: use reset framework
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-pmc.txt

@@ -9,6 +9,7 @@ Required properties:
 - compatible : Should contain "nvidia,tegra<chip>-pmc".
 - reg : Offset and length of the register set for the device
 - clocks : Must contain an entry for each entry in clock-names.
+  See ../clocks/clock-bindings.txt for details.
 - clock-names : Must include the following entries:
   "pclk" (The Tegra clock of that name),
   "clk32k_in" (The 32KHz clock input to Tegra).

Documentation/devicetree/bindings/clock/nvidia,tegra114-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra114-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra114-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/clock/nvidia,tegra124-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra124-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra124-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/clock/nvidia,tegra20-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra20-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra20-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/clock/nvidia,tegra30-car.txt

@@ -15,6 +15,9 @@ Required properties :
   In clock consumers, this cell represents the clock ID exposed by the
   CAR. The assignments may be found in header file
   <dt-bindings/clock/tegra30-car.h>.
+- #reset-cells : Should be 1.
+  In clock consumers, this cell represents the bit number in the CAR's
+  array of CLK_RST_CONTROLLER_RST_DEVICES_* registers.
 
 Example SoC include file:
 
@@ -23,6 +26,7 @@ Example SoC include file:
 		compatible = "nvidia,tegra30-car";
 		reg = <0x60006000 0x1000>;
 		#clock-cells = <1>;
+		#reset-cells = <1>;
 	};
 
 	usb@c5004000 {

Documentation/devicetree/bindings/dma/tegra20-apbdma.txt

@@ -5,6 +5,16 @@ Required properties:
 - reg: Should contain DMA registers location and length. This shuld include
   all of the per-channel registers.
 - interrupts: Should contain all of the per-channel DMA interrupts.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets : Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names : Must include the following entries:
+  - dma
+- #dma-cells : Must be <1>. This dictates the length of DMA specifiers in
+  client nodes' dmas properties. The specifier represents the DMA request
+  select value for the peripheral. For more details, consult the Tegra TRM's
+  documentation of the APB DMA channel control register REQ_SEL field.
 
 Examples:
 
@@ -27,4 +37,8 @@ apbdma: dma@6000a000 {
 		       0 149 0x04
 		       0 150 0x04
 		       0 151 0x04 >;
+	clocks = <&tegra_car 34>;
+	resets = <&tegra_car 34>;
+	reset-names = "dma";
+	#dma-cells = <1>;
 };

Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt

@@ -9,6 +9,12 @@ Required properties:
 - #size-cells: The number of cells used to represent the size of an address
   range in the host1x address space. Should be 1.
 - ranges: The mapping of the host1x address space to the CPU address space.
+- clocks: Must contain one entry, for the module clock.
+  See ../clocks/clock-bindings.txt for details.
+- resets: Must contain an entry for each entry in reset-names.
+  See ../reset/reset.txt for details.
+- reset-names: Must include the following entries:
+  - host1x
 
 The host1x top-level node defines a number of children, each representing one
 of the following host1x client modules:
@@ -19,47 +25,99 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-mpe"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - mpe
 
 - vi: video input
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-vi"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - vi
 
 - epp: encoder pre-processor
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-epp"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - epp
 
 - isp: image signal processor
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-isp"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - isp
 
 - gr2d: 2D graphics engine
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-gr2d"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 2d
 
 - gr3d: 3D graphics engine
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-gr3d"
   - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    (This property may be omitted if the only clock in the list is "3d")
+    - 3d
+      This MUST be the first entry.
+    - 3d2 (Only required on SoCs with two 3D clocks)
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - 3d
+    - 3d2 (Only required on SoCs with two 3D clocks)
 
 - dc: display controller
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-dc"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dc
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dc
 
   Each display controller node has a child node, named "rgb", that represents
   the RGB output associated with the controller. It can take the following
@@ -76,6 +134,16 @@ of the following host1x client modules:
   - interrupts: The interrupt outputs from the controller.
   - vdd-supply: regulator for supply voltage
   - pll-supply: regulator for PLL
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - hdmi
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - hdmi
 
   Optional properties:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
@@ -88,12 +156,24 @@ of the following host1x client modules:
   - compatible: "nvidia,tegra<chip>-tvo"
   - reg: Physical base address and length of the controller's registers.
   - interrupts: The interrupt outputs from the controller.
+  - clocks: Must contain one entry, for the module clock.
+    See ../clocks/clock-bindings.txt for details.
 
 - dsi: display serial interface
 
   Required properties:
   - compatible: "nvidia,tegra<chip>-dsi"
   - reg: Physical base address and length of the controller's registers.
+  - clocks: Must contain an entry for each entry in clock-names.
+    See ../clocks/clock-bindings.txt for details.
+  - clock-names: Must include the following entries:
+    - dsi
+      This MUST be the first entry.
+    - parent
+  - resets: Must contain an entry for each entry in reset-names.
+    See ../reset/reset.txt for details.
+  - reset-names: Must include the following entries:
+    - dsi
 
 Example:
 
@@ -105,6 +185,9 @@ Example:
 		reg = <0x50000000 0x00024000>;
 		interrupts = <0 65 0x04   /* mpcore syncpt */
 			      0 67 0x04>; /* mpcore general */
+		clocks = <&tegra_car TEGRA20_CLK_HOST1X>;
+		resets = <&tegra_car 28>;
+		reset-names = "host1x";
 
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -115,41 +198,64 @@ Example:
 			compatible = "nvidia,tegra20-mpe";
 			reg = <0x54040000 0x00040000>;
 			interrupts = <0 68 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_MPE>;
+			resets = <&tegra_car 60>;
+			reset-names = "mpe";
 		};
 
 		vi {
 			compatible = "nvidia,tegra20-vi";
 			reg = <0x54080000 0x00040000>;
 			interrupts = <0 69 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_VI>;
+			resets = <&tegra_car 100>;
+			reset-names = "vi";
 		};
 
 		epp {
 			compatible = "nvidia,tegra20-epp";
 			reg = <0x540c0000 0x00040000>;
 			interrupts = <0 70 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_EPP>;
+			resets = <&tegra_car 19>;
+			reset-names = "epp";
 		};
 
 		isp {
 			compatible = "nvidia,tegra20-isp";
 			reg = <0x54100000 0x00040000>;
 			interrupts = <0 71 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_ISP>;
+			resets = <&tegra_car 23>;
+			reset-names = "isp";
 		};
 
 		gr2d {
 			compatible = "nvidia,tegra20-gr2d";
 			reg = <0x54140000 0x00040000>;
 			interrupts = <0 72 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_GR2D>;
+			resets = <&tegra_car 21>;
+			reset-names = "2d";
 		};
 
 		gr3d {
 			compatible = "nvidia,tegra20-gr3d";
 			reg = <0x54180000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_GR3D>;
+			resets = <&tegra_car 24>;
+			reset-names = "3d";
 		};
 
 		dc@54200000 {
 			compatible = "nvidia,tegra20-dc";
 			reg = <0x54200000 0x00040000>;
 			interrupts = <0 73 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP1>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "disp1", "parent";
+			resets = <&tegra_car 27>;
+			reset-names = "dc";
 
 			rgb {
 				status = "disabled";
@@ -160,6 +266,11 @@ Example:
 			compatible = "nvidia,tegra20-dc";
 			reg = <0x54240000 0x00040000>;
 			interrupts = <0 74 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_DISP2>,
+				 <&tegra_car TEGRA20_CLK_PLL_P>;
+			clock-names = "disp2", "parent";
+			resets = <&tegra_car 26>;
+			reset-names = "dc";
 
 			rgb {
 				status = "disabled";
@@ -170,19 +281,30 @@ Example:
 			compatible = "nvidia,tegra20-hdmi";
 			reg = <0x54280000 0x00040000>;
 			interrupts = <0 75 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_HDMI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "hdmi", "parent";
+			resets = <&tegra_car 51>;
+			reset-names = "hdmi";
 			status = "disabled";
 		};
 
 		tvo {
 			compatible = "nvidia,tegra20-tvo";
 			reg = <0x542c0000 0x00040000>;
 			interrupts = <0 76 0x04>;
+			clocks = <&tegra_car TEGRA20_CLK_TVO>;
 			status = "disabled";
 		};
 
 		dsi {
 			compatible = "nvidia,tegra20-dsi";
 			reg = <0x54300000 0x00040000>;
+			clocks = <&tegra_car TEGRA20_CLK_DSI>,
+				 <&tegra_car TEGRA20_CLK_PLL_D_OUT0>;
+			clock-names = "dsi", "parent";
+			resets = <&tegra_car 48>;
+			reset-names = "dsi";
 			status = "disabled";
 		};
 	};