---

yaml
---
r: 150798
b: refs/heads/master
c: a60e77e
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 51611a120e8120290152edd7d0020d22a7f4b4a3
+refs/heads/master: a60e77e5a41330334fd0ca428f18919d1ea6ed62

trunk/drivers/net/can/sja1000/sja1000_of_platform.c

@@ -108,17 +108,15 @@ static int __devinit sja1000_ofp_probe(struct of_device *ofdev,
 	res_size = resource_size(&res);
 
 	if (!request_mem_region(res.start, res_size, DRV_NAME)) {
-		dev_err(&ofdev->dev, "couldn't request %#llx..%#llx\n",
-			(unsigned long long)res.start,
-			(unsigned long long)res.end);
+		dev_err(&ofdev->dev, "couldn't request %#x..%#x\n",
+			res.start, res.end);
 		return -EBUSY;
 	}
 
 	base = ioremap_nocache(res.start, res_size);
 	if (!base) {
-		dev_err(&ofdev->dev, "couldn't ioremap %#llx..%#llx\n",
-			(unsigned long long)res.start,
-			(unsigned long long)res.end);
+		dev_err(&ofdev->dev, "couldn't ioremap %#x..%#x\n",
+			res.start, res.end);
 		err = -ENOMEM;
 		goto exit_release_mem;
 	}

trunk/drivers/net/qlge/qlge.h

@@ -65,17 +65,6 @@
 
 #define DB_PAGE_SIZE 4096
 
-/* MPI test register definitions. This register
- * is used for determining alternate NIC function's
- * PCI->func number.
- */
-enum {
-	MPI_TEST_FUNC_PORT_CFG = 0x1002,
-	MPI_TEST_NIC1_FUNC_SHIFT = 1,
-	MPI_TEST_NIC2_FUNC_SHIFT = 5,
-	MPI_TEST_NIC_FUNC_MASK = 0x00000007,
-};
-
 /*
  * Processor Address Register (PROC_ADDR) bit definitions.
  */
@@ -1441,10 +1430,7 @@ struct ql_adapter {
 
 	/* Hardware information */
 	u32 chip_rev_id;
-	u32 fw_rev_id;
 	u32 func;		/* PCI function for this adapter */
-	u32 alt_func;		/* PCI function for alternate adapter */
-	u32 port;		/* Port number this adapter */
 
 	spinlock_t adapter_lock;
 	spinlock_t hw_lock;
@@ -1594,8 +1580,6 @@ void ql_mpi_idc_work(struct work_struct *work);
 void ql_mpi_port_cfg_work(struct work_struct *work);
 int ql_mb_get_fw_state(struct ql_adapter *qdev);
 int ql_cam_route_initialize(struct ql_adapter *qdev);
-int ql_read_mpi_reg(struct ql_adapter *qdev, u32 reg, u32 *data);
-int ql_mb_about_fw(struct ql_adapter *qdev);
 
 #if 1
 #define QL_ALL_DUMP

trunk/drivers/net/qlge/qlge_ethtool.c

@@ -293,10 +293,7 @@ static void ql_get_drvinfo(struct net_device *ndev,
 	struct ql_adapter *qdev = netdev_priv(ndev);
 	strncpy(drvinfo->driver, qlge_driver_name, 32);
 	strncpy(drvinfo->version, qlge_driver_version, 32);
-	snprintf(drvinfo->fw_version, 32, "v%d.%d.%d",
-		 (qdev->fw_rev_id & 0x00ff0000) >> 16,
-		 (qdev->fw_rev_id & 0x0000ff00) >> 8,
-		 (qdev->fw_rev_id & 0x000000ff));
+	strncpy(drvinfo->fw_version, "N/A", 32);
 	strncpy(drvinfo->bus_info, pci_name(qdev->pdev), 32);
 	drvinfo->n_stats = 0;
 	drvinfo->testinfo_len = 0;
@@ -404,7 +401,6 @@ const struct ethtool_ops qlge_ethtool_ops = {
 	.get_rx_csum = ql_get_rx_csum,
 	.set_rx_csum = ql_set_rx_csum,
 	.get_tx_csum = ethtool_op_get_tx_csum,
-	.set_tx_csum = ethtool_op_set_tx_csum,
 	.get_sg = ethtool_op_get_sg,
 	.set_sg = ethtool_op_set_sg,
 	.get_tso = ethtool_op_get_tso,

trunk/drivers/net/qlge/qlge_main.c

@@ -675,12 +675,11 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 	int status;
 	__le32 *p = (__le32 *)&qdev->flash;
 	u32 offset;
-	u8 mac_addr[6];
 
 	/* Get flash offset for function and adjust
 	 * for dword access.
 	 */
-	if (!qdev->port)
+	if (!qdev->func)
 		offset = FUNC0_FLASH_OFFSET / sizeof(u32);
 	else
 		offset = FUNC1_FLASH_OFFSET / sizeof(u32);
@@ -706,26 +705,14 @@ static int ql_get_8000_flash_params(struct ql_adapter *qdev)
 		goto exit;
 	}
 
-	/* Extract either manufacturer or BOFM modified
-	 * MAC address.
-	 */
-	if (qdev->flash.flash_params_8000.data_type1 == 2)
-		memcpy(mac_addr,
-			qdev->flash.flash_params_8000.mac_addr1,
-			qdev->ndev->addr_len);
-	else
-		memcpy(mac_addr,
-			qdev->flash.flash_params_8000.mac_addr,
-			qdev->ndev->addr_len);
-
-	if (!is_valid_ether_addr(mac_addr)) {
+	if (!is_valid_ether_addr(qdev->flash.flash_params_8000.mac_addr)) {
 		QPRINTK(qdev, IFUP, ERR, "Invalid MAC address.\n");
 		status = -EINVAL;
 		goto exit;
 	}
 
 	memcpy(qdev->ndev->dev_addr,
-		mac_addr,
+		qdev->flash.flash_params_8000.mac_addr,
 		qdev->ndev->addr_len);
 
 exit:
@@ -744,7 +731,7 @@ static int ql_get_8012_flash_params(struct ql_adapter *qdev)
 	/* Second function's parameters follow the first
 	 * function's.
 	 */
-	if (qdev->port)
+	if (qdev->func)
 		offset = size;
 
 	if (ql_sem_spinlock(qdev, SEM_FLASH_MASK))
@@ -850,13 +837,6 @@ int ql_read_xgmac_reg64(struct ql_adapter *qdev, u32 reg, u64 *data)
 static int ql_8000_port_initialize(struct ql_adapter *qdev)
 {
 	int status;
-	/*
-	 * Get MPI firmware version for driver banner
-	 * and ethool info.
-	 */
-	status = ql_mb_about_fw(qdev);
-	if (status)
-		goto exit;
 	status = ql_mb_get_fw_state(qdev);
 	if (status)
 		goto exit;
@@ -1538,22 +1518,6 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 		return;
 	}
 
-	/* Frame error, so drop the packet. */
-	if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) {
-		QPRINTK(qdev, DRV, ERR, "Receive error, flags2 = 0x%x\n",
-					ib_mac_rsp->flags2);
-		dev_kfree_skb_any(skb);
-		return;
-	}
-
-	/* The max framesize filter on this chip is set higher than
-	 * MTU since FCoE uses 2k frames.
-	 */
-	if (skb->len > ndev->mtu + ETH_HLEN) {
-		dev_kfree_skb_any(skb);
-		return;
-	}
-
 	prefetch(skb->data);
 	skb->dev = ndev;
 	if (ib_mac_rsp->flags1 & IB_MAC_IOCB_RSP_M_MASK) {
@@ -1576,6 +1540,7 @@ static void ql_process_mac_rx_intr(struct ql_adapter *qdev,
 	 * csum or frame errors.
 	 */
 	if (qdev->rx_csum &&
+		!(ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_ERR_MASK) &&
 		!(ib_mac_rsp->flags1 & IB_MAC_CSUM_ERR_MASK)) {
 		/* TCP frame. */
 		if (ib_mac_rsp->flags2 & IB_MAC_IOCB_RSP_T) {
@@ -3220,10 +3185,9 @@ static void ql_display_dev_info(struct net_device *ndev)
 	struct ql_adapter *qdev = (struct ql_adapter *)netdev_priv(ndev);
 
 	QPRINTK(qdev, PROBE, INFO,
-		"Function #%d, Port %d, NIC Roll %d, NIC Rev = %d, "
+		"Function #%d, NIC Roll %d, NIC Rev = %d, "
 		"XG Roll = %d, XG Rev = %d.\n",
 		qdev->func,
-		qdev->port,
 		qdev->chip_rev_id & 0x0000000f,
 		qdev->chip_rev_id >> 4 & 0x0000000f,
 		qdev->chip_rev_id >> 8 & 0x0000000f,
@@ -3299,6 +3263,7 @@ static int ql_adapter_up(struct ql_adapter *qdev)
 	err = ql_adapter_initialize(qdev);
 	if (err) {
 		QPRINTK(qdev, IFUP, INFO, "Unable to initialize adapter.\n");
+		spin_unlock(&qdev->hw_lock);
 		goto err_init;
 	}
 	set_bit(QL_ADAPTER_UP, &qdev->flags);
@@ -3395,6 +3360,7 @@ static int ql_configure_rings(struct ql_adapter *qdev)
 	 * completion handler rx_rings.
 	 */
 	qdev->rx_ring_count = qdev->tx_ring_count + qdev->rss_ring_count + 1;
+	netif_set_gso_max_size(qdev->ndev, 65536);
 
 	for (i = 0; i < qdev->tx_ring_count; i++) {
 		tx_ring = &qdev->tx_ring[i];
@@ -3677,53 +3643,12 @@ static struct nic_operations qla8000_nic_ops = {
 	.port_initialize	= ql_8000_port_initialize,
 };
 
-/* Find the pcie function number for the other NIC
- * on this chip.  Since both NIC functions share a
- * common firmware we have the lowest enabled function
- * do any common work.  Examples would be resetting
- * after a fatal firmware error, or doing a firmware
- * coredump.
- */
-static int ql_get_alt_pcie_func(struct ql_adapter *qdev)
-{
-	int status = 0;
-	u32 temp;
-	u32 nic_func1, nic_func2;
-
-	status = ql_read_mpi_reg(qdev, MPI_TEST_FUNC_PORT_CFG,
-			&temp);
-	if (status)
-		return status;
-
-	nic_func1 = ((temp >> MPI_TEST_NIC1_FUNC_SHIFT) &
-			MPI_TEST_NIC_FUNC_MASK);
-	nic_func2 = ((temp >> MPI_TEST_NIC2_FUNC_SHIFT) &
-			MPI_TEST_NIC_FUNC_MASK);
-
-	if (qdev->func == nic_func1)
-		qdev->alt_func = nic_func2;
-	else if (qdev->func == nic_func2)
-		qdev->alt_func = nic_func1;
-	else
-		status = -EIO;
-
-	return status;
-}
 
-static int ql_get_board_info(struct ql_adapter *qdev)
+static void ql_get_board_info(struct ql_adapter *qdev)
 {
-	int status;
 	qdev->func =
 	    (ql_read32(qdev, STS) & STS_FUNC_ID_MASK) >> STS_FUNC_ID_SHIFT;
-	if (qdev->func > 3)
-		return -EIO;
-
-	status = ql_get_alt_pcie_func(qdev);
-	if (status)
-		return status;
-
-	qdev->port = (qdev->func < qdev->alt_func) ? 0 : 1;
-	if (qdev->port) {
+	if (qdev->func) {
 		qdev->xg_sem_mask = SEM_XGMAC1_MASK;
 		qdev->port_link_up = STS_PL1;
 		qdev->port_init = STS_PI1;
@@ -3742,7 +3667,6 @@ static int ql_get_board_info(struct ql_adapter *qdev)
 		qdev->nic_ops = &qla8012_nic_ops;
 	else if (qdev->device_id == QLGE_DEVICE_ID_8000)
 		qdev->nic_ops = &qla8000_nic_ops;
-	return status;
 }
 
 static void ql_release_all(struct pci_dev *pdev)
@@ -3837,12 +3761,7 @@ static int __devinit ql_init_device(struct pci_dev *pdev,
 
 	qdev->ndev = ndev;
 	qdev->pdev = pdev;
-	err = ql_get_board_info(qdev);
-	if (err) {
-		dev_err(&pdev->dev, "Register access failed.\n");
-		err = -EIO;
-		goto err_out;
-	}
+	ql_get_board_info(qdev);
 	qdev->msg_enable = netif_msg_init(debug, default_msg);
 	spin_lock_init(&qdev->hw_lock);
 	spin_lock_init(&qdev->stats_lock);

trunk/drivers/net/qlge/qlge_mpi.c

@@ -547,40 +547,6 @@ static int ql_mailbox_command(struct ql_adapter *qdev, struct mbox_params *mbcp)
 	return status;
 }
 
-
-/* Get MPI firmware version. This will be used for
- * driver banner and for ethtool info.
- * Returns zero on success.
- */
-int ql_mb_about_fw(struct ql_adapter *qdev)
-{
-	struct mbox_params mbc;
-	struct mbox_params *mbcp = &mbc;
-	int status = 0;
-
-	memset(mbcp, 0, sizeof(struct mbox_params));
-
-	mbcp->in_count = 1;
-	mbcp->out_count = 3;
-
-	mbcp->mbox_in[0] = MB_CMD_ABOUT_FW;
-
-	status = ql_mailbox_command(qdev, mbcp);
-	if (status)
-		return status;
-
-	if (mbcp->mbox_out[0] != MB_CMD_STS_GOOD) {
-		QPRINTK(qdev, DRV, ERR,
-			"Failed about firmware command\n");
-		status = -EIO;
-	}
-
-	/* Store the firmware version */
-	qdev->fw_rev_id = mbcp->mbox_out[1];
-
-	return status;
-}
-
 /* Get functional state for MPI firmware.
  * Returns zero on success.
  */

trunk/drivers/net/wireless/iwlwifi/Kconfig

@@ -10,10 +10,6 @@ config IWLWIFI_LEDS
 	bool "Enable LED support in iwlagn and iwl3945 drivers"
 	depends on IWLWIFI
 
-config IWLWIFI_RFKILL
-	def_bool y
-	depends on IWLWIFI && RFKILL
-
 config IWLWIFI_SPECTRUM_MEASUREMENT
 	bool "Enable Spectrum Measurement in iwlagn driver"
 	depends on IWLWIFI

trunk/drivers/net/wireless/iwlwifi/Makefile

@@ -4,7 +4,6 @@ iwlcore-objs 		+= iwl-rx.o iwl-tx.o iwl-sta.o iwl-calib.o
 iwlcore-objs 		+= iwl-scan.o
 iwlcore-$(CONFIG_IWLWIFI_DEBUGFS) += iwl-debugfs.o
 iwlcore-$(CONFIG_IWLWIFI_LEDS) += iwl-led.o
-iwlcore-$(CONFIG_IWLWIFI_RFKILL) += iwl-rfkill.o
 iwlcore-$(CONFIG_IWLWIFI_SPECTRUM_MEASUREMENT) += iwl-spectrum.o
 
 obj-$(CONFIG_IWLAGN)	+= iwlagn.o

trunk/drivers/net/wireless/iwlwifi/iwl-3945.h

@@ -36,10 +36,6 @@
 #include <linux/kernel.h>
 #include <net/ieee80211_radiotap.h>
 
-/*used for rfkill*/
-#include <linux/rfkill.h>
-#include <linux/input.h>
-
 /* Hardware specific file defines the PCI IDs table for that hardware module */
 extern struct pci_device_id iwl3945_hw_card_ids[];
 
@@ -155,7 +151,6 @@ struct iwl3945_frame {
 #define STATUS_HCMD_SYNC_ACTIVE	1	/* sync host command in progress */
 #define STATUS_INT_ENABLED	2
 #define STATUS_RF_KILL_HW	3
-#define STATUS_RF_KILL_SW	4
 #define STATUS_INIT		5
 #define STATUS_ALIVE		6
 #define STATUS_READY		7