ARM: dts: Update for pinctrl-samsung driver for exynos4210-trats

This patch updates all parts of Trats dts related to pin configuration
to use new GPIO and pinctrl bindings, instead of (now unsupported on
Exynos4) legacy gpio-samsung bindings.

Signed-off-by: Tomasz Figa <t.figa@samsung.com>
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: Kukjin Kim <kgene.kim@samsung.com>

arch/arm/boot/dts/exynos4210-trats.dts

@@ -35,24 +35,16 @@
 		regulator-name = "VMEM_VDD_2.8V";
 		regulator-min-microvolt = <2800000>;
 		regulator-max-microvolt = <2800000>;
-		gpio = <&gpk0 2 1 0 0>;
+		gpio = <&gpk0 2 0>;
 		enable-active-high;
 	};
 
 	sdhci_emmc: sdhci@12510000 {
 		bus-width = <8>;
 		non-removable;
 		broken-voltage;
-		gpios = <&gpk0 0 2 0 3>,
-			<&gpk0 1 2 0 3>,
-			<&gpk0 3 2 2 3>,
-			<&gpk0 4 2 2 3>,
-			<&gpk0 5 2 2 3>,
-			<&gpk0 6 2 2 3>,
-			<&gpk1 3 3 3 3>,
-			<&gpk1 4 3 3 3>,
-			<&gpk1 5 3 3 3>,
-			<&gpk1 6 3 3 3>;
+		pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus8>;
+		pinctrl-names = "default";
 		vmmc-supply = <&vemmc_reg>;
 		status = "okay";
 	};
@@ -77,8 +69,8 @@
 		samsung,i2c-sda-delay = <100>;
 		samsung,i2c-slave-addr = <0x10>;
 		samsung,i2c-max-bus-freq = <100000>;
-		gpios = <&gpb 6 3 3 0>,
-			<&gpb 7 3 3 0>;
+		pinctrl-0 = <&i2c5_bus>;
+		pinctrl-names = "default";
 		status = "okay";
 
 		max8997_pmic@66 {
@@ -93,9 +85,9 @@
 			max8997,pmic-ignore-gpiodvs-side-effect;
 			max8997,pmic-buck125-default-dvs-idx = <0>;
 
-			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 1 0 0>,
-						         <&gpx0 6 1 0 0>,
-							 <&gpl0 0 1 0 0>;
+			max8997,pmic-buck125-dvs-gpios = <&gpx0 5 0>,
+						         <&gpx0 6 0>,
+							 <&gpl0 0 0>;
 
 			max8997,pmic-buck1-dvs-voltage = <1350000>, <1300000>,
 							 <1250000>, <1200000>,