---

yaml
---
r: 225519
b: refs/heads/master
c: 782a9e3
h: refs/heads/master
i:
  225517: e996576
  225515: 68d5ac7
  225511: ac849dc
  225503: 3b70a2b
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 17f9cc3124c97f50a19a7597e5f29f915b5b835c
+refs/heads/master: 782a9e31e81956a271375c0ba8d46fbb0480983e

trunk/MAINTAINERS

@@ -1080,6 +1080,12 @@ S:	Supported
 F:	Documentation/aoe/
 F:	drivers/block/aoe/
 
+ATHEROS ATH GENERIC UTILITIES
+M:	"Luis R. Rodriguez" <lrodriguez@atheros.com>
+L:	linux-wireless@vger.kernel.org
+S:	Supported
+F:	drivers/net/wireless/ath/*
+
 ATHEROS ATH5K WIRELESS DRIVER
 M:	Jiri Slaby <jirislaby@gmail.com>
 M:	Nick Kossifidis <mickflemm@gmail.com>
@@ -5026,7 +5032,7 @@ L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/rtl818x/rtl8180*
+F:	drivers/net/wireless/rtl818x/rtl8180/
 
 RTL8187 WIRELESS DRIVER
 M:	Herton Ronaldo Krzesinski <herton@mandriva.com.br>
@@ -5036,7 +5042,17 @@ L:	linux-wireless@vger.kernel.org
 W:	http://linuxwireless.org/
 T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
 S:	Maintained
-F:	drivers/net/wireless/rtl818x/rtl8187*
+F:	drivers/net/wireless/rtl818x/rtl8187/
+
+RTL8192CE WIRELESS DRIVER
+M:	Larry Finger <Larry.Finger@lwfinger.net>
+M:	Chaoming Li <chaoming_li@realsil.com.cn>
+L:	linux-wireless@vger.kernel.org
+W:	http://linuxwireless.org/
+T:	git git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless-testing.git
+S:	Maintained
+F:	drivers/net/wireless/rtlwifi/
+F:	drivers/net/wireless/rtlwifi/rtl8192ce/
 
 S3 SAVAGE FRAMEBUFFER DRIVER
 M:	Antonino Daplas <adaplas@gmail.com>

trunk/drivers/bluetooth/hci_ldisc.c

@@ -311,8 +311,10 @@ static void hci_uart_tty_close(struct tty_struct *tty)
 
 		if (test_and_clear_bit(HCI_UART_PROTO_SET, &hu->flags)) {
 			hu->proto->close(hu);
-			hci_unregister_dev(hdev);
-			hci_free_dev(hdev);
+			if (hdev) {
+				hci_unregister_dev(hdev);
+				hci_free_dev(hdev);
+			}
 		}
 	}
 }

trunk/drivers/net/wireless/Kconfig

@@ -279,6 +279,7 @@ source "drivers/net/wireless/libertas/Kconfig"
 source "drivers/net/wireless/orinoco/Kconfig"
 source "drivers/net/wireless/p54/Kconfig"
 source "drivers/net/wireless/rt2x00/Kconfig"
+source "drivers/net/wireless/rtlwifi/Kconfig"
 source "drivers/net/wireless/wl1251/Kconfig"
 source "drivers/net/wireless/wl12xx/Kconfig"
 source "drivers/net/wireless/zd1211rw/Kconfig"

trunk/drivers/net/wireless/Makefile

@@ -24,6 +24,7 @@ obj-$(CONFIG_B43LEGACY)		+= b43legacy/
 obj-$(CONFIG_ZD1211RW)		+= zd1211rw/
 obj-$(CONFIG_RTL8180)		+= rtl818x/
 obj-$(CONFIG_RTL8187)		+= rtl818x/
+obj-$(CONFIG_RTL8192CE)		+= rtlwifi/
 
 # 16-bit wireless PCMCIA client drivers
 obj-$(CONFIG_PCMCIA_RAYCS)	+= ray_cs.o

trunk/drivers/net/wireless/ath/ath.h

@@ -104,11 +104,6 @@ enum ath_cipher {
 	ATH_CIPHER_MIC = 127
 };
 
-enum ath_drv_info {
-	AR7010_DEVICE		= BIT(0),
-	AR9287_DEVICE		= BIT(1),
-};
-
 /**
  * struct ath_ops - Register read/write operations
  *
@@ -131,6 +126,7 @@ struct ath_bus_ops {
 	void (*read_cachesize)(struct ath_common *common, int *csz);
 	bool (*eeprom_read)(struct ath_common *common, u32 off, u16 *data);
 	void (*bt_coex_prep)(struct ath_common *common);
+	void (*extn_synch_en)(struct ath_common *common);
 };
 
 struct ath_common {
@@ -152,7 +148,6 @@ struct ath_common {
 	u8 rx_chainmask;
 
 	u32 rx_bufsize;
-	u32 driver_info;
 
 	u32 keymax;
 	DECLARE_BITMAP(keymap, ATH_KEYMAX);
@@ -186,4 +181,112 @@ bool ath_hw_keyreset(struct ath_common *common, u16 entry);
 void ath_hw_cycle_counters_update(struct ath_common *common);
 int32_t ath_hw_get_listen_time(struct ath_common *common);
 
+extern __attribute__ ((format (printf, 3, 4))) int
+ath_printk(const char *level, struct ath_common *common, const char *fmt, ...);
+
+#define ath_emerg(common, fmt, ...)				\
+	ath_printk(KERN_EMERG, common, fmt, ##__VA_ARGS__)
+#define ath_alert(common, fmt, ...)				\
+	ath_printk(KERN_ALERT, common, fmt, ##__VA_ARGS__)
+#define ath_crit(common, fmt, ...)				\
+	ath_printk(KERN_CRIT, common, fmt, ##__VA_ARGS__)
+#define ath_err(common, fmt, ...)				\
+	ath_printk(KERN_ERR, common, fmt, ##__VA_ARGS__)
+#define ath_warn(common, fmt, ...)				\
+	ath_printk(KERN_WARNING, common, fmt, ##__VA_ARGS__)
+#define ath_notice(common, fmt, ...)				\
+	ath_printk(KERN_NOTICE, common, fmt, ##__VA_ARGS__)
+#define ath_info(common, fmt, ...)				\
+	ath_printk(KERN_INFO, common, fmt, ##__VA_ARGS__)
+
+/**
+ * enum ath_debug_level - atheros wireless debug level
+ *
+ * @ATH_DBG_RESET: reset processing
+ * @ATH_DBG_QUEUE: hardware queue management
+ * @ATH_DBG_EEPROM: eeprom processing
+ * @ATH_DBG_CALIBRATE: periodic calibration
+ * @ATH_DBG_INTERRUPT: interrupt processing
+ * @ATH_DBG_REGULATORY: regulatory processing
+ * @ATH_DBG_ANI: adaptive noise immunitive processing
+ * @ATH_DBG_XMIT: basic xmit operation
+ * @ATH_DBG_BEACON: beacon handling
+ * @ATH_DBG_CONFIG: configuration of the hardware
+ * @ATH_DBG_FATAL: fatal errors, this is the default, DBG_DEFAULT
+ * @ATH_DBG_PS: power save processing
+ * @ATH_DBG_HWTIMER: hardware timer handling
+ * @ATH_DBG_BTCOEX: bluetooth coexistance
+ * @ATH_DBG_BSTUCK: stuck beacons
+ * @ATH_DBG_ANY: enable all debugging
+ *
+ * The debug level is used to control the amount and type of debugging output
+ * we want to see. Each driver has its own method for enabling debugging and
+ * modifying debug level states -- but this is typically done through a
+ * module parameter 'debug' along with a respective 'debug' debugfs file
+ * entry.
+ */
+enum ATH_DEBUG {
+	ATH_DBG_RESET		= 0x00000001,
+	ATH_DBG_QUEUE		= 0x00000002,
+	ATH_DBG_EEPROM		= 0x00000004,
+	ATH_DBG_CALIBRATE	= 0x00000008,
+	ATH_DBG_INTERRUPT	= 0x00000010,
+	ATH_DBG_REGULATORY	= 0x00000020,
+	ATH_DBG_ANI		= 0x00000040,
+	ATH_DBG_XMIT		= 0x00000080,
+	ATH_DBG_BEACON		= 0x00000100,
+	ATH_DBG_CONFIG		= 0x00000200,
+	ATH_DBG_FATAL		= 0x00000400,
+	ATH_DBG_PS		= 0x00000800,
+	ATH_DBG_HWTIMER		= 0x00001000,
+	ATH_DBG_BTCOEX		= 0x00002000,
+	ATH_DBG_WMI		= 0x00004000,
+	ATH_DBG_BSTUCK		= 0x00008000,
+	ATH_DBG_ANY		= 0xffffffff
+};
+
+#define ATH_DBG_DEFAULT (ATH_DBG_FATAL)
+
+#ifdef CONFIG_ATH_DEBUG
+
+#define ath_dbg(common, dbg_mask, fmt, ...)			\
+({								\
+	int rtn;						\
+	if ((common)->debug_mask & dbg_mask)			\
+		rtn = ath_printk(KERN_DEBUG, common, fmt,	\
+				 ##__VA_ARGS__);		\
+	else							\
+		rtn = 0;					\
+								\
+	rtn;							\
+})
+#define ATH_DBG_WARN(foo, arg...) WARN(foo, arg)
+#define ATH_DBG_WARN_ON_ONCE(foo) WARN_ON_ONCE(foo)
+
+#else
+
+static inline  __attribute__ ((format (printf, 3, 4))) int
+ath_dbg(struct ath_common *common, enum ATH_DEBUG dbg_mask,
+	const char *fmt, ...)
+{
+	return 0;
+}
+#define ATH_DBG_WARN(foo, arg...) do {} while (0)
+#define ATH_DBG_WARN_ON_ONCE(foo) ({				\
+	int __ret_warn_once = !!(foo);				\
+	unlikely(__ret_warn_once);				\
+})
+
+#endif /* CONFIG_ATH_DEBUG */
+
+/** Returns string describing opmode, or NULL if unknown mode. */
+#ifdef CONFIG_ATH_DEBUG
+const char *ath_opmode_to_string(enum nl80211_iftype opmode);
+#else
+static inline const char *ath_opmode_to_string(enum nl80211_iftype opmode)
+{
+	return "UNKNOWN";
+}
+#endif
+
 #endif /* ATH_H */

trunk/drivers/net/wireless/ath/ath5k/ath5k.h

@@ -154,10 +154,6 @@
 		udelay(1);						\
 } while (0)
 
-/* Register dumps are done per operation mode */
-#define AR5K_INI_RFGAIN_5GHZ		0
-#define AR5K_INI_RFGAIN_2GHZ		1
-
 /*
  * Some tuneable values (these should be changeable by the user)
  * TODO: Make use of them and add more options OR use debug/configfs
@@ -1107,12 +1103,14 @@ struct ath5k_hw {
 		/* Values in 0.25dB units */
 		s16		txp_min_pwr;
 		s16		txp_max_pwr;
+		s16		txp_cur_pwr;
 		/* Values in 0.5dB units */
 		s16		txp_offset;
 		s16		txp_ofdm;
 		s16		txp_cck_ofdm_gainf_delta;
 		/* Value in dB units */
 		s16		txp_cck_ofdm_pwr_delta;
+		bool		txp_setup;
 	} ah_txpower;
 
 	struct {
@@ -1320,7 +1318,7 @@ void ath5k_hw_set_antenna_switch(struct ath5k_hw *ah, u8 ee_mode);
 int ath5k_hw_set_txpower_limit(struct ath5k_hw *ah, u8 txpower);
 /* Init function */
 int ath5k_hw_phy_init(struct ath5k_hw *ah, struct ieee80211_channel *channel,
-				u8 mode, u8 ee_mode, u8 freq, bool fast);
+				u8 mode, bool fast);
 
 /*
  * Functions used internaly

trunk/drivers/net/wireless/ath/ath5k/attach.c

@@ -276,7 +276,7 @@ int ath5k_hw_init(struct ath5k_softc *sc)
 	/*
 	 * Write PCI-E power save settings
 	 */
-	if ((ah->ah_version == AR5K_AR5212) && pdev && (pdev->is_pcie)) {
+	if ((ah->ah_version == AR5K_AR5212) && pdev && (pci_is_pcie(pdev))) {
 		ath5k_hw_reg_write(ah, 0x9248fc00, AR5K_PCIE_SERDES);
 		ath5k_hw_reg_write(ah, 0x24924924, AR5K_PCIE_SERDES);