---

yaml
---
r: 303249
b: refs/heads/master
c: 396d81c
h: refs/heads/master
i:
  303247: d129770
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 73d68d91aa1b9e9cb6c1635143799c0fec484c08
+refs/heads/master: 396d81cd0fe12ce5d1f6d159f093f9315d2837bc

trunk/Documentation/ABI/testing/sysfs-bus-hsi

@@ -0,0 +1,19 @@
+What:		/sys/bus/hsi
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:
+		High Speed Synchronous Serial Interface (HSI) is a
+		serial interface mainly used for connecting application
+		engines (APE) with cellular modem engines (CMT) in cellular
+		handsets.
+		The bus will be populated with devices (hsi_clients) representing
+		the protocols available in the system. Bus drivers implement
+		those protocols.
+
+What:		/sys/bus/hsi/devices/.../modalias
+Date:		April 2012
+KernelVersion:	3.4
+Contact:	Carlos Chinea <carlos.chinea@nokia.com>
+Description:	Stores the same MODALIAS value emitted by uevent
+		Format: hsi:<hsi_client device name>

trunk/Documentation/DocBook/media/v4l/pixfmt-nv12m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-NV12M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_NV12M ('NV12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_NV12M ('NM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

trunk/Documentation/DocBook/media/v4l/pixfmt-yuv420m.xml

@@ -1,6 +1,6 @@
     <refentry id="V4L2-PIX-FMT-YUV420M">
       <refmeta>
-	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YU12M')</refentrytitle>
+	<refentrytitle>V4L2_PIX_FMT_YUV420M ('YM12')</refentrytitle>
 	&manvol;
       </refmeta>
       <refnamediv>

trunk/Documentation/arm/SPEAr/overview.txt

@@ -17,14 +17,14 @@ Introduction
   SPEAr (Platform)
 	- SPEAr3XX (3XX SOC series, based on ARM9)
 		- SPEAr300 (SOC)
-			- SPEAr300_EVB (Evaluation Board)
+			- SPEAr300 Evaluation Board
 		- SPEAr310 (SOC)
-			- SPEAr310_EVB (Evaluation Board)
+			- SPEAr310 Evaluation Board
 		- SPEAr320 (SOC)
-			- SPEAr320_EVB (Evaluation Board)
+			- SPEAr320 Evaluation Board
 	- SPEAr6XX (6XX SOC series, based on ARM9)
 		- SPEAr600 (SOC)
-			- SPEAr600_EVB (Evaluation Board)
+			- SPEAr600 Evaluation Board
 	- SPEAr13XX (13XX SOC series, based on ARM CORTEXA9)
 		- SPEAr1300 (SOC)
 
@@ -51,10 +51,11 @@ Introduction
   Common file for machines of spear3xx family is mach-spear3xx/spear3xx.c and for
   spear6xx is mach-spear6xx/spear6xx.c. mach-spear* also contain soc/machine
   specific files, like spear300.c, spear310.c, spear320.c and spear600.c.
-  mach-spear* also contains board specific files for each machine type.
+  mach-spear* doesn't contains board specific files as they fully support
+  Flattened Device Tree.
 
 
   Document Author
   ---------------
 
-  Viresh Kumar, (c) 2010 ST Microelectronics
+  Viresh Kumar <viresh.kumar@st.com>, (c) 2010-2012 ST Microelectronics

trunk/Documentation/devicetree/bindings/arm/lpc32xx-mic.txt

@@ -0,0 +1,38 @@
+* NXP LPC32xx Main Interrupt Controller
+  (MIC, including SIC1 and SIC2 secondary controllers)
+
+Required properties:
+- compatible: Should be "nxp,lpc3220-mic"
+- interrupt-controller: Identifies the node as an interrupt controller.
+- interrupt-parent: Empty for the interrupt controller itself
+- #interrupt-cells: The number of cells to define the interrupts. Should be 2.
+  The first cell is the IRQ number
+  The second cell is used to specify mode:
+      1 = low-to-high edge triggered
+      2 = high-to-low edge triggered
+      4 = active high level-sensitive
+      8 = active low level-sensitive
+      Default for internal sources should be set to 4 (active high).
+- reg: Should contain MIC registers location and length
+
+Examples:
+	/*
+	 * MIC
+	 */
+	mic: interrupt-controller@40008000 {
+		compatible = "nxp,lpc3220-mic";
+		interrupt-controller;
+		interrupt-parent;
+		#interrupt-cells = <2>;
+		reg = <0x40008000 0xC000>;
+	};
+
+	/*
+	 * ADC
+	 */
+	adc@40048000 {
+		compatible = "nxp,lpc3220-adc";
+		reg = <0x40048000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <39 4>;
+	};

trunk/Documentation/devicetree/bindings/arm/lpc32xx.txt

@@ -0,0 +1,8 @@
+NXP LPC32xx Platforms Device Tree Bindings
+------------------------------------------
+
+Boards with the NXP LPC32xx SoC shall have the following properties:
+
+Required root node property:
+
+compatible: must be "nxp,lpc3220", "nxp,lpc3230", "nxp,lpc3240" or "nxp,lpc3250"

trunk/Documentation/devicetree/bindings/arm/mrvl/intc.txt

@@ -0,0 +1,40 @@
+* Marvell MMP Interrupt controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-intc", "mrvl,mmp2-intc" or
+  "mrvl,mmp2-mux-intc"
+- reg : Address and length of the register set of the interrupt controller.
+  If the interrupt controller is intc, address and length means the range
+  of the whold interrupt controller. If the interrupt controller is mux-intc,
+  address and length means one register. Since address of mux-intc is in the
+  range of intc. mux-intc is secondary interrupt controller.
+- reg-names : Name of the register set of the interrupt controller. It's
+  only required in mux-intc interrupt controller.
+- interrupts : Should be the port interrupt shared by mux interrupts. It's
+  only required in mux-intc interrupt controller.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells : Specifies the number of cells needed to encode an
+  interrupt source.
+- mrvl,intc-nr-irqs : Specifies the number of interrupts in the interrupt
+  controller.
+- mrvl,clr-mfp-irq : Specifies the interrupt that needs to clear MFP edge
+  detection first.
+
+Example:
+	intc: interrupt-controller@d4282000 {
+		compatible = "mrvl,mmp2-intc";
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0xd4282000 0x1000>;
+		mrvl,intc-nr-irqs = <64>;
+	};
+
+	intcmux4@d4282150 {
+		compatible = "mrvl,mmp2-mux-intc";
+		interrupts = <4>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+		reg = <0x150 0x4>, <0x168 0x4>;
+		reg-names = "mux status", "mux mask";
+		mrvl,intc-nr-irqs = <2>;
+	};

trunk/Documentation/devicetree/bindings/arm/mrvl.txt → trunk/Documentation/devicetree/bindings/arm/mrvl/mrvl.txt

@@ -4,3 +4,11 @@ Marvell Platforms Device Tree Bindings
 PXA168 Aspenite Board
 Required root node properties:
 	- compatible = "mrvl,pxa168-aspenite", "mrvl,pxa168";
+
+PXA910 DKB Board
+Required root node properties:
+	- compatible = "mrvl,pxa910-dkb";
+
+MMP2 Brownstone Board
+Required root node properties:
+	- compatible = "mrvl,mmp2-brownstone";

trunk/Documentation/devicetree/bindings/arm/mrvl/timer.txt

@@ -0,0 +1,13 @@
+* Marvell MMP Timer controller
+
+Required properties:
+- compatible : Should be "mrvl,mmp-timer".
+- reg : Address and length of the register set of timer controller.
+- interrupts : Should be the interrupt number.
+
+Example:
+	timer0: timer@d4014000 {
+		compatible = "mrvl,mmp-timer";
+		reg = <0xd4014000 0x100>;
+		interrupts = <13>;
+	};

trunk/Documentation/devicetree/bindings/arm/spear.txt

@@ -6,3 +6,21 @@ Boards with the ST SPEAr600 SoC shall have the following properties:
 Required root node property:
 
 compatible = "st,spear600";
+
+Boards with the ST SPEAr300 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear300";
+
+Boards with the ST SPEAr310 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear310";
+
+Boards with the ST SPEAr320 SoC shall have the following properties:
+
+Required root node property:
+
+compatible = "st,spear320";

trunk/Documentation/devicetree/bindings/gpio/gpio-nmk.txt

@@ -0,0 +1,31 @@
+Nomadik GPIO controller
+
+Required properties:
+- compatible            : Should be "st,nomadik-gpio".
+- reg                   : Physical base address and length of the controller's registers.
+- interrupts            : The interrupt outputs from the controller.
+- #gpio-cells           : Should be two:
+                            The first cell is the pin number.
+                            The second cell is used to specify optional parameters:
+                              - bits[3:0] trigger type and level flags:
+                                  1 = low-to-high edge triggered.
+                                  2 = high-to-low edge triggered.
+                                  4 = active high level-sensitive.
+                                  8 = active low level-sensitive.
+- gpio-controller       : Marks the device node as a GPIO controller.
+- interrupt-controller  : Marks the device node as an interrupt controller.
+- gpio-bank             : Specifies which bank a controller owns.
+- st,supports-sleepmode : Specifies whether controller can sleep or not
+
+Example:
+
+                gpio1: gpio@8012e080 {
+                        compatible = "st,nomadik-gpio";
+                        reg =  <0x8012e080 0x80>;
+                        interrupts = <0 120 0x4>;
+                        #gpio-cells = <2>;
+                        gpio-controller;
+                        interrupt-controller;
+                        supports-sleepmode;
+                        gpio-bank = <1>;
+                };

trunk/Documentation/devicetree/bindings/gpio/mrvl-gpio.txt

@@ -3,19 +3,25 @@
 Required properties:
 - compatible : Should be "mrvl,pxa-gpio" or "mrvl,mmp-gpio"
 - reg : Address and length of the register set for the device
-- interrupts : Should be the port interrupt shared by all gpio pins, if
-- interrupt-name : Should be the name of irq resource.
-  one number.
+- interrupts : Should be the port interrupt shared by all gpio pins.
+  There're three gpio interrupts in arch-pxa, and they're gpio0,
+  gpio1 and gpio_mux. There're only one gpio interrupt in arch-mmp,
+  gpio_mux.
+- interrupt-name : Should be the name of irq resource. Each interrupt
+  binds its interrupt-name.
+- interrupt-controller : Identifies the node as an interrupt controller.
+- #interrupt-cells: Specifies the number of cells needed to encode an
+  interrupt source.
 - gpio-controller : Marks the device node as a gpio controller.
 - #gpio-cells : Should be one.  It is the pin number.
 
 Example:
 
 	gpio: gpio@d4019000 {
-		compatible = "mrvl,mmp-gpio", "mrvl,pxa-gpio";
+		compatible = "mrvl,mmp-gpio";
 		reg = <0xd4019000 0x1000>;
-		interrupts = <49>, <17>, <18>;
-		interrupt-name = "gpio_mux", "gpio0", "gpio1";
+		interrupts = <49>;
+		interrupt-name = "gpio_mux";
 		gpio-controller;
 		#gpio-cells = <1>;
 		interrupt-controller;

trunk/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt

@@ -3,34 +3,31 @@
 Required properties :
 
  - reg : Offset and length of the register set for the device
- - compatible : should be "mrvl,mmp-twsi" where CHIP is the name of a
+ - compatible : should be "mrvl,mmp-twsi" where mmp is the name of a
    compatible processor, e.g. pxa168, pxa910, mmp2, mmp3.
    For the pxa2xx/pxa3xx, an additional node "mrvl,pxa-i2c" is required
    as shown in the example below.
 
 Recommended properties :
 
- - interrupts : <a b> where a is the interrupt number and b is a
-   field that represents an encoding of the sense and level
-   information for the interrupt.  This should be encoded based on
-   the information in section 2) depending on the type of interrupt
-   controller you have.
+ - interrupts : the interrupt number
  - interrupt-parent : the phandle for the interrupt controller that
-   services interrupts for this device.
+   services interrupts for this device. If the parent is the default
+   interrupt controller in device tree, it could be ignored.
  - mrvl,i2c-polling : Disable interrupt of i2c controller. Polling
    status register of i2c controller instead.
  - mrvl,i2c-fast-mode : Enable fast mode of i2c controller.
 
 Examples:
 	twsi1: i2c@d4011000 {
-		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		compatible = "mrvl,mmp-twsi";
 		reg = <0xd4011000 0x1000>;
 		interrupts = <7>;
 		mrvl,i2c-fast-mode;
 	};
 
 	twsi2: i2c@d4025000 {
-		compatible = "mrvl,mmp-twsi", "mrvl,pxa-i2c";
+		compatible = "mrvl,mmp-twsi";
 		reg = <0xd4025000 0x1000>;
 		interrupts = <58>;
 	};

trunk/Documentation/devicetree/bindings/i2c/pnx.txt

@@ -0,0 +1,36 @@
+* NXP PNX I2C Controller
+
+Required properties:
+
+ - reg: Offset and length of the register set for the device
+ - compatible: should be "nxp,pnx-i2c"
+ - interrupts: configure one interrupt line
+ - #address-cells: always 1 (for i2c addresses)
+ - #size-cells: always 0
+ - interrupt-parent: the phandle for the interrupt controller that
+   services interrupts for this device.
+
+Optional properties:
+
+ - clock-frequency: desired I2C bus clock frequency in Hz, Default: 100000 Hz
+
+Examples:
+
+	i2c1: i2c@400a0000 {
+		compatible = "nxp,pnx-i2c";
+		reg = <0x400a0000 0x100>;
+		interrupt-parent = <&mic>;
+		interrupts = <51 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+	};
+
+	i2c2: i2c@400a8000 {
+		compatible = "nxp,pnx-i2c";
+		reg = <0x400a8000 0x100>;
+		interrupt-parent = <&mic>;
+		interrupts = <50 0>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+		clock-frequency = <100000>;
+	};

trunk/Documentation/devicetree/bindings/net/lpc-eth.txt

@@ -0,0 +1,24 @@
+* NXP LPC32xx SoC Ethernet Controller
+
+Required properties:
+- compatible: Should be "nxp,lpc-eth"
+- reg: Address and length of the register set for the device
+- interrupts: Should contain ethernet controller interrupt
+
+Optional properties:
+- phy-mode: String, operation mode of the PHY interface.
+  Supported values are: "mii", "rmii" (default)
+- use-iram: Use LPC32xx internal SRAM (IRAM) for DMA buffering
+- local-mac-address : 6 bytes, mac address
+
+Example:
+
+	mac: ethernet@31060000 {
+		compatible = "nxp,lpc-eth";
+		reg = <0x31060000 0x1000>;
+		interrupt-parent = <&mic>;
+		interrupts = <29 0>;
+
+		phy-mode = "rmii";
+		use-iram;
+	};