---

yaml --- r: 119494 b: refs/heads/master c: c07f62e h: refs/heads/master v: v3
git-mirror · Dec 1, 2008 · e9dfee4 · e9dfee4
1 parent 8372321
commit e9dfee4
Show file tree

Hide file tree

Showing 393 changed files with 7,045 additions and 3,966 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: ee8a1a0a1a5817accd03ced7e7ffde3a4430f485
+refs/heads/master: c07f62e5f18123103459ff74e86af1518a5b8af5
diff --git a/trunk/Documentation/cpu-freq/user-guide.txt b/trunk/Documentation/cpu-freq/user-guide.txt
@@ -23,6 +23,7 @@ Contents:
 1.3 sparc64
 1.4 ppc
 1.5 SuperH
+1.6 Blackfin
 
 2. "Policy" / "Governor"?
 2.1 Policy
@@ -97,6 +98,17 @@ The following SuperH processors are supported by cpufreq:
 SH-3
 SH-4
 
+1.6 Blackfin
+------------
+
+The following Blackfin processors are supported by cpufreq:
+
+BF522, BF523, BF524, BF525, BF526, BF527, Rev 0.1 or higher
+BF531, BF532, BF533, Rev 0.3 or higher
+BF534, BF536, BF537, Rev 0.2 or higher
+BF561, Rev 0.3 or higher
+BF542, BF544, BF547, BF548, BF549, Rev 0.1 or higher
+
 
 2. "Policy" / "Governor" ?
 ==========================

diff --git a/trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt b/trunk/Documentation/filesystems/ramfs-rootfs-initramfs.txt
@@ -130,12 +130,12 @@ The 2.6 kernel build process always creates a gzipped cpio format initramfs
 archive and links it into the resulting kernel binary.  By default, this
 archive is empty (consuming 134 bytes on x86).
 
-The config option CONFIG_INITRAMFS_SOURCE (for some reason buried under
-devices->block devices in menuconfig, and living in usr/Kconfig) can be used
-to specify a source for the initramfs archive, which will automatically be
-incorporated into the resulting binary.  This option can point to an existing
-gzipped cpio archive, a directory containing files to be archived, or a text
-file specification such as the following example:
+The config option CONFIG_INITRAMFS_SOURCE (in General Setup in menuconfig,
+and living in usr/Kconfig) can be used to specify a source for the
+initramfs archive, which will automatically be incorporated into the
+resulting binary.  This option can point to an existing gzipped cpio
+archive, a directory containing files to be archived, or a text file
+specification such as the following example:
 
   dir /dev 755 0 0
   nod /dev/console 644 0 0 c 5 1

diff --git a/trunk/Documentation/input/input-programming.txt b/trunk/Documentation/input/input-programming.txt
@@ -20,10 +20,11 @@ pressed or released a BUTTON_IRQ happens. The driver could look like:
 
 static struct input_dev *button_dev;
 
-static void button_interrupt(int irq, void *dummy, struct pt_regs *fp)
+static irqreturn_t button_interrupt(int irq, void *dummy)
 {
 	input_report_key(button_dev, BTN_0, inb(BUTTON_PORT) & 1);
 	input_sync(button_dev);
+	return IRQ_HANDLED;
 }
 
 static int __init button_init(void)

diff --git a/trunk/Documentation/kernel-parameters.txt b/trunk/Documentation/kernel-parameters.txt
@@ -294,7 +294,9 @@ and is between 256 and 4096 characters. It is defined in the file
 			Possible values are:
 			isolate - enable device isolation (each device, as far
 			          as possible, will get its own protection
-			          domain)
+			          domain) [default]
+			share - put every device behind one IOMMU into the
+				same protection domain
 			fullflush - enable flushing of IO/TLB entries when
 				    they are unmapped. Otherwise they are
 				    flushed before they will be reused, which
@@ -1193,8 +1195,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			it is equivalent to "nosmp", which also disables
 			the IO APIC.
 
-	max_addr=[KMG]	[KNL,BOOT,ia64] All physical memory greater than or
-			equal to this physical address is ignored.
+	max_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory greater than
+			or equal to this physical address is ignored.
 
 	max_luns=	[SCSI] Maximum number of LUNs to probe.
 			Should be between 1 and 2^32-1.
@@ -1294,6 +1296,9 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	mga=		[HW,DRM]
 
+	min_addr=nn[KMG]	[KNL,BOOT,ia64] All physical memory below this
+			physical address is ignored.
+
 	mminit_loglevel=
 			[KNL] When CONFIG_DEBUG_MEMORY_INIT is set, this
 			parameter allows control of the logging verbosity for

diff --git a/trunk/Documentation/networking/phy.txt b/trunk/Documentation/networking/phy.txt
@@ -96,7 +96,7 @@ Letting the PHY Abstraction Layer do Everything
    static void adjust_link(struct net_device *dev);
 
  Next, you need to know the device name of the PHY connected to this device. 
- The name will look something like, "phy0:0", where the first number is the
+ The name will look something like, "0:00", where the first number is the
  bus id, and the second is the PHY's address on that bus.  Typically,
  the bus is responsible for making its ID unique.
 

diff --git a/trunk/Documentation/sound/alsa/ALSA-Configuration.txt b/trunk/Documentation/sound/alsa/ALSA-Configuration.txt
@@ -1072,10 +1072,13 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed.
 	  ref		Reference board
 	  dell-m4-1	Dell desktops
 	  dell-m4-2	Dell desktops
+	  dell-m4-3	Dell desktops
 
 	STAC92HD73*
 	  ref		Reference board
-	  dell-m6	Dell desktops
+	  dell-m6-amic	Dell desktops/laptops with analog mics
+	  dell-m6-dmic	Dell desktops/laptops with digital mics
+	  dell-m6	Dell desktops/laptops with both type of mics
 
 	STAC9872
 	  vaio		Setup for VAIO FE550G/SZ110

diff --git a/trunk/Documentation/tracers/mmiotrace.txt b/trunk/Documentation/tracers/mmiotrace.txt
@@ -37,7 +37,7 @@ $ echo mmiotrace > /debug/tracing/current_tracer
 $ cat /debug/tracing/trace_pipe > mydump.txt &
 Start X or whatever.
 $ echo "X is up" > /debug/tracing/trace_marker
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 Check for lost events.
 
 
@@ -66,7 +66,7 @@ which action. It is recommended to place descriptive markers about what you
 do.
 
 Shut down mmiotrace (requires root privileges):
-$ echo none > /debug/tracing/current_tracer
+$ echo nop > /debug/tracing/current_tracer
 The 'cat' process exits. If it does not, kill it by issuing 'fg' command and
 pressing ctrl+c.
 
@@ -81,7 +81,9 @@ are:
 $ cat /debug/tracing/trace_entries
 gives you a number. Approximately double this number and write it back, for
 instance:
+$ echo 0 > /debug/tracing/tracing_enabled
 $ echo 128000 > /debug/tracing/trace_entries
+$ echo 1 > /debug/tracing/tracing_enabled
 Then start again from the top.
 
 If you are doing a trace for a driver project, e.g. Nouveau, you should also

diff --git a/trunk/MAINTAINERS b/trunk/MAINTAINERS
@@ -1809,7 +1809,7 @@ S:	Maintained
 
 FTRACE
 P:	Steven Rostedt
-M:	srostedt@redhat.com
+M:	rostedt@goodmis.org
 S:	Maintained
 
 FUJITSU FR-V (FRV) PORT
@@ -3928,8 +3928,6 @@ M:	bootc@bootc.net
 S:	Maintained
 
 SOFTWARE RAID (Multiple Disks) SUPPORT
-P:	Ingo Molnar
-M:	mingo@redhat.com
 P:	Neil Brown
 M:	neilb@suse.de
 L:	linux-raid@vger.kernel.org

diff --git a/trunk/Makefile b/trunk/Makefile
@@ -1,7 +1,7 @@
 VERSION = 2
 PATCHLEVEL = 6
 SUBLEVEL = 28
-EXTRAVERSION = -rc5
+EXTRAVERSION = -rc6
 NAME = Killer Bat of Doom
 
 # *DOCUMENTATION*

diff --git a/trunk/arch/Kconfig b/trunk/arch/Kconfig
@@ -79,8 +79,6 @@ config HAVE_KRETPROBES
 #	task_pt_regs()		in asm/processor.h or asm/ptrace.h
 #	arch_has_single_step()	if there is hardware single-step support
 #	arch_has_block_step()	if there is hardware block-step support
-#	arch_ptrace()		and not #define __ARCH_SYS_PTRACE
-#	compat_arch_ptrace()	and #define __ARCH_WANT_COMPAT_SYS_PTRACE
 #	asm/syscall.h		supplying asm-generic/syscall.h interface
 #	linux/regset.h		user_regset interfaces
 #	CORE_DUMP_USE_REGSET	#define'd in linux/elf.h

diff --git a/trunk/arch/alpha/kernel/pci.c b/trunk/arch/alpha/kernel/pci.c
@@ -338,7 +338,7 @@ common_swizzle(struct pci_dev *dev, u8 *pinp)
 	return PCI_SLOT(dev->devfn);
 }
 
-void __devinit
+void
 pcibios_resource_to_bus(struct pci_dev *dev, struct pci_bus_region *region,
 			 struct resource *res)
 {

diff --git a/trunk/arch/alpha/kernel/smp.c b/trunk/arch/alpha/kernel/smp.c
@@ -121,7 +121,7 @@ wait_boot_cpu_to_stop(int cpuid)
 /*
  * Where secondaries begin a life of C.
  */
-void __init
+void __cpuinit
 smp_callin(void)
 {
 	int cpuid = hard_smp_processor_id();
@@ -198,7 +198,7 @@ wait_for_txrdy (unsigned long cpumask)
  * Send a message to a secondary's console.  "START" is one such
  * interesting message.  ;-)
  */
-static void __init
+static void __cpuinit
 send_secondary_console_msg(char *str, int cpuid)
 {
 	struct percpu_struct *cpu;
@@ -289,7 +289,7 @@ recv_secondary_console_msg(void)
 /*
  * Convince the console to have a secondary cpu begin execution.
  */
-static int __init
+static int __cpuinit
 secondary_cpu_start(int cpuid, struct task_struct *idle)
 {
 	struct percpu_struct *cpu;

diff --git a/trunk/arch/alpha/kernel/traps.c b/trunk/arch/alpha/kernel/traps.c
@@ -31,7 +31,7 @@
 
 static int opDEC_fix;
 
-static void __init
+static void __cpuinit
 opDEC_check(void)
 {
 	__asm__ __volatile__ (
@@ -1072,7 +1072,7 @@ do_entUnaUser(void __user * va, unsigned long opcode,
 	return;
 }
 
-void __init
+void __cpuinit
 trap_init(void)
 {
 	/* Tell PAL-code what global pointer we want in the kernel.  */

diff --git a/trunk/arch/arm/configs/corgi_defconfig b/trunk/arch/arm/configs/corgi_defconfig
@@ -179,7 +179,7 @@ CONFIG_MACH_HUSKY=y
 # CONFIG_MACH_AKITA is not set
 # CONFIG_MACH_SPITZ is not set
 # CONFIG_MACH_BORZOI is not set
-CONFIG_MACH_TOSA=y
+# CONFIG_MACH_TOSA is not set
 # CONFIG_ARCH_VIPER is not set
 # CONFIG_ARCH_PXA_ESERIES is not set
 # CONFIG_TRIZEPS_PXA is not set

diff --git a/trunk/arch/arm/mach-pxa/include/mach/pxafb.h b/trunk/arch/arm/mach-pxa/include/mach/pxafb.h
@@ -33,6 +33,7 @@
 #define LCD_CONN_TYPE(_x)	((_x) & 0x0f)
 #define LCD_CONN_WIDTH(_x)	(((_x) >> 4) & 0x1f)
 
+#define LCD_TYPE_MASK		0xf
 #define LCD_TYPE_UNKNOWN	0
 #define LCD_TYPE_MONO_STN	1
 #define LCD_TYPE_MONO_DSTN	2

diff --git a/trunk/arch/arm/mach-pxa/mioa701.c b/trunk/arch/arm/mach-pxa/mioa701.c
@@ -565,7 +565,7 @@ static int mioa701_sys_suspend(struct sys_device *sysdev, pm_message_t state)
 	u32 *mem_resume_unknown	= phys_to_virt(RESUME_UNKNOWN_ADDR);
 
 	/* Devices prepare suspend */
-	is_bt_on = gpio_get_value(GPIO83_BT_ON);
+	is_bt_on = !!gpio_get_value(GPIO83_BT_ON);
 	pxa2xx_mfp_set_lpm(GPIO83_BT_ON,
 			   is_bt_on ? MFP_LPM_DRIVE_HIGH : MFP_LPM_DRIVE_LOW);
 

diff --git a/trunk/arch/arm/mach-pxa/mioa701_bootresume.S b/trunk/arch/arm/mach-pxa/mioa701_bootresume.S
@@ -24,6 +24,7 @@ ENTRY(mioa701_jumpaddr)
 1:
 	mov	r0,     #0xa0000000	@ Don't suppose memory access works
 	orr	r0, r0, #0x00200000	@ even if it's supposed to
+	orr	r0, r0, #0x0000b000
 	mov	r1, #0
 	str	r1, [r0]		@ Early disable resume for next boot
 	ldr	r0, mioa701_jumpaddr	@ (Murphy's Law)