---

yaml
---
r: 96260
b: refs/heads/master
c: d9a9a23
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 53962ecf6ebbdb5b15a8b35fbefe34430eb25609
+refs/heads/master: d9a9a23ff2b00463f25e880d13364938b321ab8a

trunk/Documentation/DocBook/kgdb.tmpl

@@ -72,7 +72,7 @@
     kgdb is a source level debugger for linux kernel. It is used along
     with gdb to debug a linux kernel.  The expectation is that gdb can
     be used to "break in" to the kernel to inspect memory, variables
-    and look through a cal stack information similar to what an
+    and look through call stack information similar to what an
     application developer would use gdb for.  It is possible to place
     breakpoints in kernel code and perform some limited execution
     stepping.
@@ -93,8 +93,10 @@
   <chapter id="CompilingAKernel">
     <title>Compiling a kernel</title>
     <para>
-    To enable <symbol>CONFIG_KGDB</symbol>, look under the "Kernel debugging"
-    and then select "KGDB: kernel debugging with remote gdb".
+    To enable <symbol>CONFIG_KGDB</symbol> you should first turn on
+    "Prompt for development and/or incomplete code/drivers"
+    (CONFIG_EXPERIMENTAL) in  "General setup", then under the
+    "Kernel debugging" select "KGDB: kernel debugging with remote gdb".
     </para>
     <para>
     Next you should choose one of more I/O drivers to interconnect debugging

trunk/Documentation/filesystems/Locking

@@ -92,7 +92,6 @@ prototypes:
 	void (*destroy_inode)(struct inode *);
 	void (*dirty_inode) (struct inode *);
 	int (*write_inode) (struct inode *, int);
-	void (*put_inode) (struct inode *);
 	void (*drop_inode) (struct inode *);
 	void (*delete_inode) (struct inode *);
 	void (*put_super) (struct super_block *);
@@ -115,7 +114,6 @@ alloc_inode:		no	no	no
 destroy_inode:		no
 dirty_inode:		no				(must not sleep)
 write_inode:		no
-put_inode:		no
 drop_inode:		no				!!!inode_lock!!!
 delete_inode:		no
 put_super:		yes	yes	no

trunk/Documentation/filesystems/vfs.txt

@@ -205,7 +205,6 @@ struct super_operations {
 
         void (*dirty_inode) (struct inode *);
         int (*write_inode) (struct inode *, int);
-        void (*put_inode) (struct inode *);
         void (*drop_inode) (struct inode *);
         void (*delete_inode) (struct inode *);
         void (*put_super) (struct super_block *);
@@ -246,9 +245,6 @@ or bottom half).
 	inode to disc.  The second parameter indicates whether the write
 	should be synchronous or not, not all filesystems check this flag.
 
-  put_inode: called when the VFS inode is removed from the inode
-	cache.
-
   drop_inode: called when the last access to the inode is dropped,
 	with the inode_lock spinlock held.
 

trunk/Documentation/kernel-parameters.txt

@@ -1094,9 +1094,6 @@ and is between 256 and 4096 characters. It is defined in the file
 	mac5380=	[HW,SCSI] Format:
 			<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
 
-	mac53c9x=	[HW,SCSI] Format:
-			<num_esps>,<disconnect>,<nosync>,<can_queue>,<cmd_per_lun>,<sg_tablesize>,<hostid>,<use_tags>
-
 	machvec=	[IA64] Force the use of a particular machine-vector
 			(machvec) in a generic kernel.
 			Example: machvec=hpzx1_swiotlb
@@ -1525,6 +1522,8 @@ and is between 256 and 4096 characters. It is defined in the file
 				This is normally done in pci_enable_device(),
 				so this option is a temporary workaround
 				for broken drivers that don't call it.
+		skip_isa_align	[X86] do not align io start addr, so can
+				handle more pci cards
 		firmware	[ARM] Do not re-enumerate the bus but instead
 				just use the configuration from the
 				bootloader. This is currently used on

trunk/Documentation/s390/CommonIO

@@ -8,17 +8,6 @@ Command line parameters
 
   Enable logging of debug information in case of ccw device timeouts.
 
-
-* cio_msg = yes | no
-
-  Determines whether information on found devices and sensed device 
-  characteristics should be shown during startup or when new devices are
-  found, i. e. messages of the types "Detected device 0.0.4711 on subchannel
-  0.0.0042" and "SenseID: Device 0.0.4711 reports: ...".
-
-  Default is off.
-
-
 * cio_ignore = {all} |
 	       {<device> | <range of devices>} |
 	       {!<device> | !<range of devices>}

trunk/MAINTAINERS

@@ -2112,12 +2112,10 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 
 INTEL ETHERNET DRIVERS (e100/e1000/e1000e/igb/ixgb/ixgbe)
-P:	Auke Kok
-M:	auke-jan.h.kok@intel.com
-P:	Jesse Brandeburg
-M:	jesse.brandeburg@intel.com
 P:	Jeff Kirsher
 M:	jeffrey.t.kirsher@intel.com
+P:	Jesse Brandeburg
+M:	jesse.brandeburg@intel.com
 P:	Bruce Allan
 M:	bruce.w.allan@intel.com
 P:	John Ronciak

trunk/arch/arm/mach-orion5x/common.c

@@ -223,7 +223,9 @@ static struct platform_device orion5x_eth = {
 
 void __init orion5x_eth_init(struct mv643xx_eth_platform_data *eth_data)
 {
+	eth_data->shared = &orion5x_eth_shared;
 	orion5x_eth.dev.platform_data = eth_data;
+
 	platform_device_register(&orion5x_eth_shared);
 	platform_device_register(&orion5x_eth);
 }

trunk/arch/cris/kernel/sys_cris.c

@@ -27,25 +27,6 @@
 #include <asm/uaccess.h>
 #include <asm/segment.h>
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int sys_pipe(unsigned long __user * fildes)
-{
-        int fd[2];
-        int error;
-
-        lock_kernel();
-        error = do_pipe(fd);
-        unlock_kernel();
-        if (!error) {
-                if (copy_to_user(fildes, fd, 2*sizeof(int)))
-                        error = -EFAULT;
-        }
-        return error;
-}
-
 /* common code for old and new mmaps */
 static inline long
 do_mmap2(unsigned long addr, unsigned long len, unsigned long prot,

trunk/arch/m32r/kernel/sys_m32r.c

@@ -76,26 +76,6 @@ asmlinkage int sys_tas(int __user *addr)
 	return oldval;
 }
 
-/*
- * sys_pipe() is the normal C calling standard for creating
- * a pipe. It's not the way Unix traditionally does this, though.
- */
-asmlinkage int
-sys_pipe(unsigned long r0, unsigned long r1, unsigned long r2,
-	unsigned long r3, unsigned long r4, unsigned long r5,
-	unsigned long r6, struct pt_regs regs)
-{
-	int fd[2];
-	int error;
-
-	error = do_pipe(fd);
-	if (!error) {
-		if (copy_to_user((void __user *)r0, fd, 2*sizeof(int)))
-			error = -EFAULT;
-	}
-	return error;
-}
-
 asmlinkage long sys_mmap2(unsigned long addr, unsigned long len,
 	unsigned long prot, unsigned long flags,
 	unsigned long fd, unsigned long pgoff)

trunk/arch/m68k/kernel/traps.c

@@ -468,15 +468,26 @@ static inline void access_error040(struct frame *fp)
 			 * (if do_page_fault didn't fix the mapping,
                          * the writeback won't do good)
 			 */
+disable_wb:
 #ifdef DEBUG
 			printk(".. disabling wb2\n");
 #endif
 			if (fp->un.fmt7.wb2a == fp->un.fmt7.faddr)
 				fp->un.fmt7.wb2s &= ~WBV_040;
+			if (fp->un.fmt7.wb3a == fp->un.fmt7.faddr)
+				fp->un.fmt7.wb3s &= ~WBV_040;
 		}
-	} else if (send_fault_sig(&fp->ptregs) > 0) {
-		printk("68040 access error, ssw=%x\n", ssw);
-		trap_c(fp);
+	} else {
+		/* In case of a bus error we either kill the process or expect
+		 * the kernel to catch the fault, which then is also responsible
+		 * for cleaning up the mess.
+		 */
+		current->thread.signo = SIGBUS;
+		current->thread.faddr = fp->un.fmt7.faddr;
+		if (send_fault_sig(&fp->ptregs) >= 0)
+			printk("68040 bus error (ssw=%x, faddr=%lx)\n", ssw,
+			       fp->un.fmt7.faddr);
+		goto disable_wb;
 	}
 
 	do_040writebacks(fp);