---

yaml
---
r: 292499
b: refs/heads/master
c: 4f8cf36
h: refs/heads/master
i:
  292497: 0691e3a
  292495: 9566ebe
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b0787660260604ba63621881851de0032279819b
+refs/heads/master: 4f8cf36f48b4648a5231e9fc8e49faea377246f4

trunk/arch/powerpc/include/asm/exception-64s.h

@@ -272,26 +272,11 @@ label##_hv:								\
 	_MASKABLE_EXCEPTION_PSERIES(vec, label,				\
 				    EXC_HV, SOFTEN_TEST_HV)
 
-#ifdef CONFIG_PPC_ISERIES
-#define DISABLE_INTS				\
-	li	r11,0;				\
-	stb	r11,PACASOFTIRQEN(r13);		\
-BEGIN_FW_FTR_SECTION;				\
-	stb	r11,PACAHARDIRQEN(r13);		\
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES);	\
-	TRACE_DISABLE_INTS;			\
-BEGIN_FW_FTR_SECTION;				\
-	mfmsr	r10;				\
-	ori	r10,r10,MSR_EE;			\
-	mtmsrd	r10,1;				\
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#else
 #define DISABLE_INTS				\
 	li	r11,0;				\
 	stb	r11,PACASOFTIRQEN(r13);		\
 	stb	r11,PACAHARDIRQEN(r13);		\
 	TRACE_DISABLE_INTS
-#endif /* CONFIG_PPC_ISERIES */
 
 #define ENABLE_INTS				\
 	ld	r12,_MSR(r1);			\

trunk/arch/powerpc/kernel/entry_64.S

@@ -127,17 +127,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_SPLPAR)
 	stb	r10,PACASOFTIRQEN(r13)
 	stb	r10,PACAHARDIRQEN(r13)
 	std	r10,SOFTE(r1)
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	/* Hack for handling interrupts when soft-enabling on iSeries */
-	cmpdi	cr1,r0,0x5555		/* syscall 0x5555 */
-	andi.	r10,r12,MSR_PR		/* from kernel */
-	crand	4*cr0+eq,4*cr1+eq,4*cr0+eq
-	bne	2f
-	b	hardware_interrupt_entry
-2:
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
 
 	/* Hard enable interrupts */
 #ifdef CONFIG_PPC_BOOK3E
@@ -591,15 +580,10 @@ _GLOBAL(ret_from_except_lite)
 	ld	r4,TI_FLAGS(r9)
 	andi.	r0,r4,_TIF_USER_WORK_MASK
 	bne	do_work
-#endif
+#endif /* !CONFIG_PREEMPT */
 
 restore:
-BEGIN_FW_FTR_SECTION
 	ld	r5,SOFTE(r1)
-FW_FTR_SECTION_ELSE
-	b	.Liseries_check_pending_irqs
-ALT_FW_FTR_SECTION_END_IFCLR(FW_FEATURE_ISERIES)
-2:
 	TRACE_AND_RESTORE_IRQ(r5);
 
 	/* extract EE bit and use it to restore paca->hard_enabled */
@@ -669,30 +653,6 @@ ALT_FTR_SECTION_END_IFCLR(CPU_FTR_STCX_CHECKS_ADDRESS)
 
 #endif /* CONFIG_PPC_BOOK3E */
 
-.Liseries_check_pending_irqs:
-#ifdef CONFIG_PPC_ISERIES
-	ld	r5,SOFTE(r1)
-	cmpdi	0,r5,0
-	beq	2b
-	/* Check for pending interrupts (iSeries) */
-	ld	r3,PACALPPACAPTR(r13)
-	ld	r3,LPPACAANYINT(r3)
-	cmpdi	r3,0
-	beq+	2b			/* skip do_IRQ if no interrupts */
-
-	li	r3,0
-	stb	r3,PACASOFTIRQEN(r13)	/* ensure we are soft-disabled */
-#ifdef CONFIG_TRACE_IRQFLAGS
-	bl	.trace_hardirqs_off
-	mfmsr	r10
-#endif
-	ori	r10,r10,MSR_EE
-	mtmsrd	r10			/* hard-enable again */
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_IRQ
-	b	.ret_from_except_lite		/* loop back and handle more */
-#endif
-
 do_work:
 #ifdef CONFIG_PREEMPT
 	andi.	r0,r3,MSR_PR	/* Returning to user mode? */

trunk/arch/powerpc/kernel/exceptions-64s.S

@@ -19,7 +19,7 @@
  * We layout physical memory as follows:
  * 0x0000 - 0x00ff : Secondary processor spin code
  * 0x0100 - 0x2fff : pSeries Interrupt prologs
- * 0x3000 - 0x5fff : interrupt support, iSeries and common interrupt prologs
+ * 0x3000 - 0x5fff : interrupt support common interrupt prologs
  * 0x6000 - 0x6fff : Initial (CPU0) segment table
  * 0x7000 - 0x7fff : FWNMI data area
  * 0x8000 -        : Early init and support code
@@ -458,6 +458,7 @@ machine_check_common:
 	bl	.machine_check_exception
 	b	.ret_from_except
 
+	STD_EXCEPTION_COMMON_LITE(0x500, hardware_interrupt, do_IRQ)
 	STD_EXCEPTION_COMMON_LITE(0x900, decrementer, .timer_interrupt)
 	STD_EXCEPTION_COMMON(0xa00, trap_0a, .unknown_exception)
 	STD_EXCEPTION_COMMON(0xb00, trap_0b, .unknown_exception)
@@ -672,12 +673,6 @@ _GLOBAL(slb_miss_realmode)
 	ld	r10,PACA_EXSLB+EX_LR(r13)
 	ld	r3,PACA_EXSLB+EX_R3(r13)
 	lwz	r9,PACA_EXSLB+EX_CCR(r13)	/* get saved CR */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	ld	r11,PACALPPACAPTR(r13)
-	ld	r11,LPPACASRR0(r11)		/* get SRR0 value */
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
 
 	mtlr	r10
 
@@ -690,12 +685,6 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 	mtcrf	0x01,r9		/* slb_allocate uses cr0 and cr7 */
 .machine	pop
 
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	mtspr	SPRN_SRR0,r11
-	mtspr	SPRN_SRR1,r12
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
 	ld	r9,PACA_EXSLB+EX_R9(r13)
 	ld	r10,PACA_EXSLB+EX_R10(r13)
 	ld	r11,PACA_EXSLB+EX_R11(r13)
@@ -704,13 +693,7 @@ END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
 	rfid
 	b	.	/* prevent speculative execution */
 
-2:
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	b	unrecov_slb
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif /* CONFIG_PPC_ISERIES */
-	mfspr	r11,SPRN_SRR0
+2:	mfspr	r11,SPRN_SRR0
 	ld	r10,PACAKBASE(r13)
 	LOAD_HANDLER(r10,unrecov_slb)
 	mtspr	SPRN_SRR0,r10
@@ -727,20 +710,6 @@ unrecov_slb:
 	bl	.unrecoverable_exception
 	b	1b
 
-	.align	7
-	.globl hardware_interrupt_common
-	.globl hardware_interrupt_entry
-hardware_interrupt_common:
-	EXCEPTION_PROLOG_COMMON(0x500, PACA_EXGEN)
-	FINISH_NAP
-hardware_interrupt_entry:
-	DISABLE_INTS
-BEGIN_FTR_SECTION
-	bl	.ppc64_runlatch_on
-END_FTR_SECTION_IFSET(CPU_FTR_CTRL)
-	addi	r3,r1,STACK_FRAME_OVERHEAD
-	bl	.do_IRQ
-	b	.ret_from_except_lite
 
 #ifdef CONFIG_PPC_970_NAP
 power4_fixup_nap:
@@ -913,11 +882,7 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
 	andis.	r0,r0,NMI_MASK@h	/* (i.e. an irq when soft-disabled) */
 	bne	77f			/* then don't call hash_page now */
 
-	/*
-	 * On iSeries, we soft-disable interrupts here, then
-	 * hard-enable interrupts so that the hash_page code can spin on
-	 * the hash_table_lock without problems on a shared processor.
-	 */
+	/* We run with interrupts both soft and hard disabled */
 	DISABLE_INTS
 
 	/*
@@ -956,25 +921,11 @@ END_MMU_FTR_SECTION_IFCLR(MMU_FTR_SLB)
 	bl	.hash_page		/* build HPTE if possible */
 	cmpdi	r3,0			/* see if hash_page succeeded */
 
-BEGIN_FW_FTR_SECTION
-	/*
-	 * If we had interrupts soft-enabled at the point where the
-	 * DSI/ISI occurred, and an interrupt came in during hash_page,
-	 * handle it now.
-	 * We jump to ret_from_except_lite rather than fast_exception_return
-	 * because ret_from_except_lite will check for and handle pending
-	 * interrupts if necessary.
-	 */
-	beq	13f
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-
-BEGIN_FW_FTR_SECTION
 	/*
 	 * Here we have interrupts hard-disabled, so it is sufficient
 	 * to restore paca->{soft,hard}_enable and get out.
 	 */
 	beq	fast_exc_return_irq	/* Return from exception on success */
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
 
 	/* For a hash failure, we don't bother re-enabling interrupts */
 	ble-	12f
@@ -1141,51 +1092,19 @@ _GLOBAL(do_stab_bolted)
 	.= 0x7000
 	.globl fwnmi_data_area
 fwnmi_data_area:
-#endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
-
-	/* iSeries does not use the FWNMI stuff, so it is safe to put
-	 * this here, even if we later allow kernels that will boot on
-	 * both pSeries and iSeries */
-#ifdef CONFIG_PPC_ISERIES
-        . = LPARMAP_PHYS
-	.globl xLparMap
-xLparMap:
-	.quad	HvEsidsToMap		/* xNumberEsids */
-	.quad	HvRangesToMap		/* xNumberRanges */
-	.quad	STAB0_PAGE		/* xSegmentTableOffs */
-	.zero	40			/* xRsvd */
-	/* xEsids (HvEsidsToMap entries of 2 quads) */
-	.quad	PAGE_OFFSET_ESID	/* xKernelEsid */
-	.quad	PAGE_OFFSET_VSID	/* xKernelVsid */
-	.quad	VMALLOC_START_ESID	/* xKernelEsid */
-	.quad	VMALLOC_START_VSID	/* xKernelVsid */
-	/* xRanges (HvRangesToMap entries of 3 quads) */
-	.quad	HvPagesToMap		/* xPages */
-	.quad	0			/* xOffset */
-	.quad	PAGE_OFFSET_VSID << (SID_SHIFT - HW_PAGE_SHIFT)	/* xVPN */
-
-#endif /* CONFIG_PPC_ISERIES */
 
-#if defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV)
 	/* pseries and powernv need to keep the whole page from
 	 * 0x7000 to 0x8000 free for use by the firmware
 	 */
         . = 0x8000
 #endif /* defined(CONFIG_PPC_PSERIES) || defined(CONFIG_PPC_POWERNV) */
 
-/*
- * Space for CPU0's segment table.
- *
- * On iSeries, the hypervisor must fill in at least one entry before
- * we get control (with relocate on).  The address is given to the hv
- * as a page number (see xLparMap above), so this must be at a
- * fixed address (the linker can't compute (u64)&initial_stab >>
- * PAGE_SHIFT).
- */
-	. = STAB0_OFFSET	/* 0x8000 */
+/* Space for CPU0's segment table */
+	.balign 4096
 	.globl initial_stab
 initial_stab:
 	.space	4096
+
 #ifdef CONFIG_PPC_POWERNV
 _GLOBAL(opal_mc_secondary_handler)
 	HMT_MEDIUM

trunk/arch/powerpc/kernel/head_64.S

@@ -32,7 +32,6 @@
 #include <asm/cputable.h>
 #include <asm/setup.h>
 #include <asm/hvcall.h>
-#include <asm/iseries/lpar_map.h>
 #include <asm/thread_info.h>
 #include <asm/firmware.h>
 #include <asm/page_64.h>
@@ -57,10 +56,6 @@
  *	entry in r9 for debugging purposes
  *   2. Secondary processors enter at 0x60 with PIR in gpr3
  *
- *  For iSeries:
- *   1. The MMU is on (as it always is for iSeries)
- *   2. The kernel is entered at system_reset_iSeries
- *
  *  For Book3E processors:
  *   1. The MMU is on running in AS0 in a state defined in ePAPR
  *   2. The kernel is entered at __start
@@ -93,15 +88,6 @@ __secondary_hold_spinloop:
 __secondary_hold_acknowledge:
 	.llong	0x0
 
-#ifdef CONFIG_PPC_ISERIES
-	/*
-	 * At offset 0x20, there is a pointer to iSeries LPAR data.
-	 * This is required by the hypervisor
-	 */
-	. = 0x20
-	.llong hvReleaseData-KERNELBASE
-#endif /* CONFIG_PPC_ISERIES */
-
 #ifdef CONFIG_RELOCATABLE
 	/* This flag is set to 1 by a loader if the kernel should run
 	 * at the loaded address instead of the linked address.  This
@@ -582,7 +568,7 @@ _GLOBAL(pmac_secondary_start)
  *   1. Processor number
  *   2. Segment table pointer (virtual address)
  * On entry the following are set:
- *   r1	       = stack pointer.  vaddr for iSeries, raddr (temp stack) for pSeries
+ *   r1	       = stack pointer (real addr of temp stack)
  *   r24       = cpu# (in Linux terms)
  *   r13       = paca virtual address
  *   SPRG_PACA = paca virtual address
@@ -595,7 +581,7 @@ __secondary_start:
 	/* Set thread priority to MEDIUM */
 	HMT_MEDIUM
 
-	/* Initialize the kernel stack.  Just a repeat for iSeries.	 */
+	/* Initialize the kernel stack */
 	LOAD_REG_ADDR(r3, current_set)
 	sldi	r28,r24,3		/* get current_set[cpu#]	 */
 	ldx	r14,r3,r28
@@ -615,20 +601,13 @@ __secondary_start:
 	li	r7,0
 	mtlr	r7
 
+	/* Mark interrupts both hard and soft disabled */
+	stb	r7,PACAHARDIRQEN(r13)
+	stb	r7,PACASOFTIRQEN(r13)
+
 	/* enable MMU and jump to start_secondary */
 	LOAD_REG_ADDR(r3, .start_secondary_prolog)
 	LOAD_REG_IMMEDIATE(r4, MSR_KERNEL)
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	ori	r4,r4,MSR_EE
-	li	r8,1
-	stb	r8,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
-BEGIN_FW_FTR_SECTION
-	stb	r7,PACAHARDIRQEN(r13)
-END_FW_FTR_SECTION_IFCLR(FW_FEATURE_ISERIES)
-	stb	r7,PACASOFTIRQEN(r13)
 
 	mtspr	SPRN_SRR0,r3
 	mtspr	SPRN_SRR1,r4
@@ -774,17 +753,8 @@ _INIT_GLOBAL(start_here_common)
 	bl	.setup_system
 
 	/* Load up the kernel context */
-5:
-	li	r5,0
+5:	li	r5,0
 	stb	r5,PACASOFTIRQEN(r13)	/* Soft Disabled */
-#ifdef CONFIG_PPC_ISERIES
-BEGIN_FW_FTR_SECTION
-	mfmsr	r5
-	ori	r5,r5,MSR_EE		/* Hard Enabled on iSeries*/
-	mtmsrd	r5
-	li	r5,1
-END_FW_FTR_SECTION_IFSET(FW_FEATURE_ISERIES)
-#endif
 	stb	r5,PACAHARDIRQEN(r13)	/* Hard Disabled on others */
 
 	bl	.start_kernel

trunk/arch/powerpc/kernel/misc.S

@@ -5,7 +5,6 @@
  * Largely rewritten by Cort Dougan (cort@cs.nmt.edu)
  * and Paul Mackerras.
  *
- * Adapted for iSeries by Mike Corrigan (mikejc@us.ibm.com)
  * PPC64 updates by Dave Engebretsen (engebret@us.ibm.com)
  *
  * setjmp/longjmp code by Paul Mackerras.

trunk/arch/powerpc/kernel/vmlinux.lds.S

@@ -109,11 +109,6 @@ SECTIONS
 		__ptov_table_begin = .;
 		*(.ptov_fixup);
 		__ptov_table_end = .;
-#ifdef CONFIG_PPC_ISERIES
-		__dt_strings_start = .;
-		*(.dt_strings);
-		__dt_strings_end = .;
-#endif
 	}
 
 	.init.setup : AT(ADDR(.init.setup) - LOAD_OFFSET) {