---

yaml
---
r: 353468
b: refs/heads/master
c: 5f3d25c
h: refs/heads/master
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 555df91a00c2d70949cb38415b6de7e4304c0f9a
+refs/heads/master: 5f3d25c08dee44a40229f1f9e8934f3217478a67

trunk/Documentation/DocBook/media/v4l/driver.xml

@@ -116,15 +116,15 @@ my_suspend              (struct pci_dev *               pci_dev,
 	return 0; /* a negative value on error, 0 on success. */
 }
 
-static void
+static void __devexit
 my_remove               (struct pci_dev *               pci_dev)
 {
 	my_device *my = pci_get_drvdata (pci_dev);
 
 	/* Describe me. */
 }
 
-static int
+static int __devinit
 my_probe                (struct pci_dev *               pci_dev,
 			 const struct pci_device_id *   pci_id)
 {
@@ -157,7 +157,7 @@ my_pci_driver = {
 	.id_table = my_pci_device_ids,
 
 	.probe    = my_probe,
-	.remove   = my_remove,
+	.remove   = __devexit_p (my_remove),
 
 	/* Power management functions. */
 	.suspend  = my_suspend,

trunk/Documentation/PCI/pci-iov-howto.txt

@@ -76,7 +76,7 @@ To notify SR-IOV core of Virtual Function Migration:
 
 Following piece of code illustrates the usage of the SR-IOV API.
 
-static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
+static int __devinit dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 {
 	pci_enable_sriov(dev, NR_VIRTFN);
 
@@ -85,7 +85,7 @@ static int dev_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	return 0;
 }
 
-static void dev_remove(struct pci_dev *dev)
+static void __devexit dev_remove(struct pci_dev *dev)
 {
 	pci_disable_sriov(dev);
 
@@ -131,7 +131,7 @@ static struct pci_driver dev_driver = {
 	.name =		"SR-IOV Physical Function driver",
 	.id_table =	dev_id_table,
 	.probe =	dev_probe,
-	.remove =	dev_remove,
+	.remove =	__devexit_p(dev_remove),
 	.suspend =	dev_suspend,
 	.resume =	dev_resume,
 	.shutdown =	dev_shutdown,

trunk/Documentation/PCI/pci.txt

@@ -183,13 +183,33 @@ Please mark the initialization and cleanup functions where appropriate
 			initializes.
 	__exit		Exit code. Ignored for non-modular drivers.
 
+
+	__devinit	Device initialization code.
+			Identical to __init if the kernel is not compiled
+			with CONFIG_HOTPLUG, normal function otherwise.
+	__devexit	The same for __exit.
+
 Tips on when/where to use the above attributes:
 	o The module_init()/module_exit() functions (and all
 	  initialization functions called _only_ from these)
 	  should be marked __init/__exit.
 
 	o Do not mark the struct pci_driver.
 
+	o The ID table array should be marked __devinitconst; this is done
+	  automatically if the table is declared with DEFINE_PCI_DEVICE_TABLE().
+
+	o The probe() and remove() functions should be marked __devinit
+	  and __devexit respectively.  All initialization functions
+	  exclusively called by the probe() routine, can be marked __devinit.
+	  Ditto for remove() and __devexit.
+
+	o If mydriver_remove() is marked with __devexit(), then all address
+	  references to mydriver_remove must use __devexit_p(mydriver_remove)
+	  (in the struct pci_driver declaration for example).
+	  __devexit_p() will generate the function name _or_ NULL if the
+	  function will be discarded.  For an example, see drivers/net/tg3.c.
+
 	o Do NOT mark a function if you are not sure which mark to use.
 	  Better to not mark the function than mark the function wrong.
 

trunk/Documentation/acpi/enumeration.txt

@@ -185,7 +185,7 @@ input driver:
 			.acpi_match_table  ACPI_PTR(mpu3050_acpi_match),
 		},
 		.probe		= mpu3050_probe,
-		.remove		= mpu3050_remove,
+		.remove		= __devexit_p(mpu3050_remove),
 		.id_table	= mpu3050_ids,
 	};
 

trunk/Documentation/device-mapper/dm-raid.txt

@@ -141,4 +141,3 @@ Version History
 1.2.0	Handle creation of arrays that contain failed devices.
 1.3.0	Added support for RAID 10
 1.3.1	Allow device replacement/rebuild for RAID 10
-1.3.2   Fix/improve redundancy checking for RAID10

trunk/Documentation/devicetree/bindings/clock/imx23-clock.txt

@@ -60,6 +60,11 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx23-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
+	clock-output-names =
+		...
+		"uart",		/* 32 */
+		...
+		"end_of_list";
 };
 
 auart0: serial@8006c000 {

trunk/Documentation/devicetree/bindings/clock/imx25-clock.txt

@@ -146,6 +146,10 @@ clks: ccm@53f80000 {
 	compatible = "fsl,imx25-ccm";
 	reg = <0x53f80000 0x4000>;
 	interrupts = <31>;
+	clock-output-names = ...
+			"uart_ipg",
+			"uart_serial",
+			...;
 };
 
 uart1: serial@43f90000 {

trunk/Documentation/devicetree/bindings/clock/imx28-clock.txt

@@ -83,6 +83,11 @@ clks: clkctrl@80040000 {
 	compatible = "fsl,imx28-clkctrl";
 	reg = <0x80040000 0x2000>;
 	#clock-cells = <1>;
+	clock-output-names =
+		...
+		"uart",		/* 45 */
+		...
+		"end_of_list";
 };
 
 auart0: serial@8006a000 {

trunk/Documentation/devicetree/bindings/clock/imx6q-clock.txt

@@ -211,6 +211,10 @@ clks: ccm@020c4000 {
 	reg = <0x020c4000 0x4000>;
 	interrupts = <0 87 0x04 0 88 0x04>;
 	#clock-cells = <1>;
+	clock-output-names = ...
+			     "uart_ipg",
+			     "uart_serial",
+			     ...;
 };
 
 uart1: serial@02020000 {

trunk/Documentation/devicetree/bindings/gpio/gpio-poweroff.txt

@@ -1,19 +1,4 @@
-Driver a GPIO line that can be used to turn the power off.
-
-The driver supports both level triggered and edge triggered power off.
-At driver load time, the driver will request the given gpio line and
-install a pm_power_off handler. If the optional properties 'input' is
-not found, the GPIO line will be driven in the inactive
-state. Otherwise its configured as an input.
-
-When the pm_power_off is called, the gpio is configured as an output,
-and drive active, so triggering a level triggered power off
-condition. This will also cause an inactive->active edge condition, so
-triggering positive edge triggered power off. After a delay of 100ms,
-the GPIO is set to inactive, thus causing an active->inactive edge,
-triggering negative edge triggered power off. After another 100ms
-delay the GPIO is driver active again. If the power is still on and
-the CPU still running after a 3000ms delay, a WARN_ON(1) is emitted.
+GPIO line that should be set high/low to power off a device
 
 Required properties:
 - compatible : should be "gpio-poweroff".
@@ -28,9 +13,10 @@ Optional properties:
   property is not specified, the GPIO is initialized as an output in its
   inactive state.
 
+
 Examples:
 
 gpio-poweroff {
 	compatible = "gpio-poweroff";
-	gpios = <&gpio 4 0>;
+	gpios = <&gpio 4 0>; /* GPIO 4 Active Low */
 };

trunk/Documentation/devicetree/bindings/pinctrl/atmel,at91-pinctrl.txt

@@ -81,8 +81,7 @@ PA31	TXD4
 Required properties for pin configuration node:
 - atmel,pins: 4 integers array, represents a group of pins mux and config
   setting. The format is atmel,pins = <PIN_BANK PIN_BANK_NUM PERIPH CONFIG>.
-  The PERIPH 0 means gpio, PERIPH 1 is periph A, PERIPH 2 is periph B...
-  PIN_BANK 0 is pioA, PIN_BANK 1 is pioB...
+  The PERIPH 0 means gpio.
 
 Bits used for CONFIG:
 PULL_UP		(1 << 0): indicate this pin need a pull up.
@@ -127,7 +126,7 @@ pinctrl@fffff400 {
 		pinctrl_dbgu: dbgu-0 {
 			atmel,pins =
 				<1 14 0x1 0x0	/* PB14 periph A */
-				 1 15 0x1 0x1>;	/* PB15 periph A with pullup */
+				 1 15 0x1 0x1>;	/* PB15 periph with pullup */
 		};
 	};
 };

trunk/Documentation/devicetree/bindings/sound/cs4271.txt

@@ -20,18 +20,6 @@ Optional properties:
 		!RESET pin
  - cirrus,amuteb-eq-bmutec:	When given, the Codec's AMUTEB=BMUTEC flag
 				is enabled.
- - cirrus,enable-soft-reset:
-	The CS4271 requires its LRCLK and MCLK to be stable before its RESET
-	line is de-asserted. That also means that clocks cannot be changed
-	without putting the chip back into hardware reset, which also requires
-	a complete re-initialization of all registers.
-
-	One (undocumented) workaround is to assert and de-assert the PDN bit
-	in the MODE2 register. This workaround can be enabled with this DT
-	property.
-
-	Note that this is not needed in case the clocks are stable
-	throughout the entire runtime of the codec.
 
 Examples: