---

yaml
---
r: 172543
b: refs/heads/master
c: 1a71e4a
h: refs/heads/master
i:
  172541: ced5b93
  172539: 81a3ebe
  172535: aca9253
  172527: a9c3893
  172511: c6dce14
  172479: d776c40
  172415: 9d78dec
  172287: f95a71c
  172031: 34ad129
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 22e649ff2e162d3c6ce2a78c377863aab826a8b8
+refs/heads/master: 1a71e4ade19d51bab03b6837d4d33a953e4e1206

trunk/arch/arm/mach-s3c2410/Kconfig

@@ -81,6 +81,14 @@ config ARCH_H1940
 	help
 	  Say Y here if you are using the HP IPAQ H1940
 
+config H1940BT
+        tristate "Control the state of H1940 bluetooth chip"
+        depends on ARCH_H1940
+        select RFKILL
+        help
+          This is a simple driver that is able to control
+          the state of built in bluetooth chip on h1940.
+
 config PM_H1940
 	bool
 	help

trunk/arch/arm/mach-s3c2410/Makefile

@@ -21,7 +21,8 @@ obj-$(CONFIG_S3C2410_PLLTABLE)	+= pll.o
 # Machine support
 
 obj-$(CONFIG_ARCH_SMDK2410)	+= mach-smdk2410.o
-obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o h1940-bluetooth.o
+obj-$(CONFIG_ARCH_H1940)	+= mach-h1940.o
+obj-$(CONFIG_H1940BT)		+= h1940-bluetooth.o
 obj-$(CONFIG_PM_H1940)		+= pm-h1940.o
 obj-$(CONFIG_MACH_N30)		+= mach-n30.o
 obj-$(CONFIG_ARCH_BAST)		+= mach-bast.o usb-simtec.o

trunk/arch/arm/mach-s3c2410/h1940-bluetooth.c

@@ -17,77 +17,50 @@
 #include <linux/ctype.h>
 #include <linux/leds.h>
 #include <linux/gpio.h>
+#include <linux/rfkill.h>
 
 #include <mach/regs-gpio.h>
 #include <mach/hardware.h>
 #include <mach/h1940-latch.h>
 
 #define DRV_NAME              "h1940-bt"
 
-#ifdef CONFIG_LEDS_H1940
-DEFINE_LED_TRIGGER(bt_led_trigger);
-#endif
-
-static int state;
-
 /* Bluetooth control */
 static void h1940bt_enable(int on)
 {
 	if (on) {
-#ifdef CONFIG_LEDS_H1940
-		/* flashing Blue */
-		led_trigger_event(bt_led_trigger, LED_HALF);
-#endif
-
 		/* Power on the chip */
 		h1940_latch_control(0, H1940_LATCH_BLUETOOTH_POWER);
 		/* Reset the chip */
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
-
-		state = 1;
 	}
 	else {
-#ifdef CONFIG_LEDS_H1940
-		led_trigger_event(bt_led_trigger, 0);
-#endif
-
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
 		mdelay(10);
 		s3c2410_gpio_setpin(S3C2410_GPH(1), 0);
 		mdelay(10);
 		h1940_latch_control(H1940_LATCH_BLUETOOTH_POWER, 0);
-
-		state = 0;
 	}
 }
 
-static ssize_t h1940bt_show(struct device *dev, struct device_attribute *attr, char *buf)
+static int h1940bt_set_block(void *data, bool blocked)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", state);
+	h1940bt_enable(!blocked);
+	return 0;
 }
 
-static ssize_t h1940bt_store(struct device *dev, struct device_attribute *attr, const char *buf, size_t count)
-{
-	int new_state;
-	char *endp;
-
-	new_state = simple_strtoul(buf, &endp, 0);
-	if (*endp && !isspace(*endp))
-		return -EINVAL;
-
-	h1940bt_enable(new_state);
-
-	return count;
-}
-static DEVICE_ATTR(enable, 0644,
-		h1940bt_show,
-		h1940bt_store);
+static const struct rfkill_ops h1940bt_rfkill_ops = {
+	.set_block = h1940bt_set_block,
+};
 
 static int __init h1940bt_probe(struct platform_device *pdev)
 {
+	struct rfkill *rfk;
+	int ret = 0;
+
 	/* Configures BT serial port GPIOs */
 	s3c2410_gpio_cfgpin(S3C2410_GPH(0), S3C2410_GPH0_nCTS0);
 	s3c2410_gpio_pullup(S3C2410_GPH(0), 1);
@@ -98,21 +71,44 @@ static int __init h1940bt_probe(struct platform_device *pdev)
 	s3c2410_gpio_cfgpin(S3C2410_GPH(3), S3C2410_GPH3_RXD0);
 	s3c2410_gpio_pullup(S3C2410_GPH(3), 1);
 
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_register_simple("h1940-bluetooth", &bt_led_trigger);
-#endif
 
-	/* disable BT by default */
-	h1940bt_enable(0);
+	rfk = rfkill_alloc(DRV_NAME, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+			&h1940bt_rfkill_ops, NULL);
+	if (!rfk) {
+		ret = -ENOMEM;
+		goto err_rfk_alloc;
+	}
+
+	rfkill_set_led_trigger_name(rfk, "h1940-bluetooth");
+
+	ret = rfkill_register(rfk);
+	if (ret)
+		goto err_rfkill;
+
+	platform_set_drvdata(pdev, rfk);
+
+	return 0;
 
-	return device_create_file(&pdev->dev, &dev_attr_enable);
+err_rfkill:
+	rfkill_destroy(rfk);
+err_rfk_alloc:
+	return ret;
 }
 
 static int h1940bt_remove(struct platform_device *pdev)
 {
-#ifdef CONFIG_LEDS_H1940
-	led_trigger_unregister_simple(bt_led_trigger);
-#endif
+	struct rfkill *rfk = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	if (rfk) {
+		rfkill_unregister(rfk);
+		rfkill_destroy(rfk);
+	}
+	rfk = NULL;
+
+	h1940bt_enable(0);
+
 	return 0;
 }