---

yaml
---
r: 40219
b: refs/heads/master
c: 485ae77
h: refs/heads/master
i:
  40217: a68a7c9
  40215: fa54d95
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 0c0e4668e0e65dd1404e8cf066d147235f95561d
+refs/heads/master: 485ae77dc7f484563707557ccf8c5d228980619f

trunk/Documentation/HOWTO

@@ -395,26 +395,6 @@ bugme-janitor mailing list (every change in the bugzilla is mailed here)
 
 
 
-Managing bug reports
---------------------
-
-One of the best ways to put into practice your hacking skills is by fixing
-bugs reported by other people. Not only you will help to make the kernel
-more stable, you'll learn to fix real world problems and you will improve
-your skills, and other developers will be aware of your presence. Fixing
-bugs is one of the best ways to get merits among other developers, because
-not many people like wasting time fixing other people's bugs.
-
-To work in the already reported bug reports, go to http://bugzilla.kernel.org.
-If you want to be advised of the future bug reports, you can subscribe to the
-bugme-new mailing list (only new bug reports are mailed here) or to the
-bugme-janitor mailing list (every change in the bugzilla is mailed here)
-
-	http://lists.osdl.org/mailman/listinfo/bugme-new
-	http://lists.osdl.org/mailman/listinfo/bugme-janitors
-
-
-
 Mailing lists
 -------------
 

trunk/Documentation/MSI-HOWTO.txt

@@ -470,68 +470,7 @@ LOC:     324553     325068
 ERR:          0
 MIS:          0
 
-6. MSI quirks
-
-Several PCI chipsets or devices are known to not support MSI.
-The PCI stack provides 3 possible levels of MSI disabling:
-* on a single device
-* on all devices behind a specific bridge
-* globally
-
-6.1. Disabling MSI on a single device
-
-Under some circumstances, it might be required to disable MSI on a
-single device, It may be achived by either not calling pci_enable_msi()
-or all, or setting the pci_dev->no_msi flag before (most of the time
-in a quirk).
-
-6.2. Disabling MSI below a bridge
-
-The vast majority of MSI quirks are required by PCI bridges not
-being able to route MSI between busses. In this case, MSI have to be
-disabled on all devices behind this bridge. It is achieves by setting
-the PCI_BUS_FLAGS_NO_MSI flag in the pci_bus->bus_flags of the bridge
-subordinate bus. There is no need to set the same flag on bridges that
-are below the broken brigde. When pci_enable_msi() is called to enable
-MSI on a device, pci_msi_supported() takes care of checking the NO_MSI
-flag in all parent busses of the device.
-
-Some bridges actually support dynamic MSI support enabling/disabling
-by changing some bits in their PCI configuration space (especially
-the Hypertransport chipsets such as the nVidia nForce and Serverworks
-HT2000). It may then be required to update the NO_MSI flag on the
-corresponding devices in the sysfs hierarchy. To enable MSI support
-on device "0000:00:0e", do:
-
-	echo 1 > /sys/bus/pci/devices/0000:00:0e/msi_bus
-
-To disable MSI support, echo 0 instead of 1. Note that it should be
-used with caution since changing this value might break interrupts.
-
-6.3. Disabling MSI globally
-
-Some extreme cases may require to disable MSI globally on the system.
-For now, the only known case is a Serverworks PCI-X chipsets (MSI are
-not supported on several busses that are not all connected to the
-chipset in the Linux PCI hierarchy). In the vast majority of other
-cases, disabling only behind a specific bridge is enough.
-
-For debugging purpose, the user may also pass pci=nomsi on the kernel
-command-line to explicitly disable MSI globally. But, once the appro-
-priate quirks are added to the kernel, this option should not be
-required anymore.
-
-6.4. Finding why MSI cannot be enabled on a device
-
-Assuming that MSI are not enabled on a device, you should look at
-dmesg to find messages that quirks may output when disabling MSI
-on some devices, some bridges or even globally.
-Then, lspci -t gives the list of bridges above a device. Reading
-/sys/bus/pci/devices/0000:00:0e/msi_bus will tell you whether MSI
-are enabled (1) or disabled (0). In 0 is found in a single bridge
-msi_bus file above the device, MSI cannot be enabled.
-
-7. FAQ
+6. FAQ
 
 Q1. Are there any limitations on using the MSI?
 

trunk/Documentation/cpu-hotplug.txt

@@ -46,7 +46,7 @@ maxcpus=n    Restrict boot time cpus to n. Say if you have 4 cpus, using
              maxcpus=2 will only boot 2. You can choose to bring the
              other cpus later online, read FAQ's for more info.
 
-additional_cpus=n (*)	Use this to limit hotpluggable cpus. This option sets
+additional_cpus*=n	Use this to limit hotpluggable cpus. This option sets
   			cpu_possible_map = cpu_present_map + additional_cpus
 
 (*) Option valid only for following architectures
@@ -101,15 +101,15 @@ cpu_possible_map/for_each_possible_cpu() to iterate.
 
 Never use anything other than cpumask_t to represent bitmap of CPUs.
 
-	#include <linux/cpumask.h>
+#include <linux/cpumask.h>
 
-	for_each_possible_cpu     - Iterate over cpu_possible_map
-	for_each_online_cpu       - Iterate over cpu_online_map
-	for_each_present_cpu      - Iterate over cpu_present_map
-	for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask.
+for_each_possible_cpu     - Iterate over cpu_possible_map
+for_each_online_cpu       - Iterate over cpu_online_map
+for_each_present_cpu      - Iterate over cpu_present_map
+for_each_cpu_mask(x,mask) - Iterate over some random collection of cpu mask.
 
-	#include <linux/cpu.h>
-	lock_cpu_hotplug() and unlock_cpu_hotplug():
+#include <linux/cpu.h>
+lock_cpu_hotplug() and unlock_cpu_hotplug():
 
 The above calls are used to inhibit cpu hotplug operations. While holding the
 cpucontrol mutex, cpu_online_map will not change. If you merely need to avoid
@@ -120,7 +120,7 @@ will work as long as stop_machine_run() is used to take a cpu down.
 
 CPU Hotplug - Frequently Asked Questions.
 
-Q: How to enable my kernel to support CPU hotplug?
+Q: How to i enable my kernel to support CPU hotplug?
 A: When doing make defconfig, Enable CPU hotplug support
 
    "Processor type and Features" -> Support for Hotpluggable CPUs
@@ -141,57 +141,57 @@ A: You should now notice an entry in sysfs.
 Check if sysfs is mounted, using the "mount" command. You should notice
 an entry as shown below in the output.
 
-	....
-	none on /sys type sysfs (rw)
-	....
+....
+none on /sys type sysfs (rw)
+....
 
-If this is not mounted, do the following.
+if this is not mounted, do the following.
 
-	 #mkdir /sysfs
-	#mount -t sysfs sys /sys
+#mkdir /sysfs
+#mount -t sysfs sys /sys
 
-Now you should see entries for all present cpu, the following is an example
+now you should see entries for all present cpu, the following is an example
 in a 8-way system.
 
-	#pwd
-	#/sys/devices/system/cpu
-	#ls -l
-	total 0
-	drwxr-xr-x  10 root root 0 Sep 19 07:44 .
-	drwxr-xr-x  13 root root 0 Sep 19 07:45 ..
-	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu0
-	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu1
-	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu2
-	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu3
-	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu4
-	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu5
-	drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu6
-	drwxr-xr-x   3 root root 0 Sep 19 07:48 cpu7
+#pwd
+#/sys/devices/system/cpu
+#ls -l
+total 0
+drwxr-xr-x  10 root root 0 Sep 19 07:44 .
+drwxr-xr-x  13 root root 0 Sep 19 07:45 ..
+drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu0
+drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu1
+drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu2
+drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu3
+drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu4
+drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu5
+drwxr-xr-x   3 root root 0 Sep 19 07:44 cpu6
+drwxr-xr-x   3 root root 0 Sep 19 07:48 cpu7
 
 Under each directory you would find an "online" file which is the control
 file to logically online/offline a processor.
 
 Q: Does hot-add/hot-remove refer to physical add/remove of cpus?
 A: The usage of hot-add/remove may not be very consistently used in the code.
-CONFIG_HOTPLUG_CPU enables logical online/offline capability in the kernel.
+CONFIG_CPU_HOTPLUG enables logical online/offline capability in the kernel.
 To support physical addition/removal, one would need some BIOS hooks and
 the platform should have something like an attention button in PCI hotplug.
 CONFIG_ACPI_HOTPLUG_CPU enables ACPI support for physical add/remove of CPUs.
 
 Q: How do i logically offline a CPU?
 A: Do the following.
 
-	#echo 0 > /sys/devices/system/cpu/cpuX/online
+#echo 0 > /sys/devices/system/cpu/cpuX/online
 
-Once the logical offline is successful, check
+once the logical offline is successful, check
 
-	#cat /proc/interrupts
+#cat /proc/interrupts
 
-You should now not see the CPU that you removed. Also online file will report
+you should now not see the CPU that you removed. Also online file will report
 the state as 0 when a cpu if offline and 1 when its online.
 
-	#To display the current cpu state.
-	#cat /sys/devices/system/cpu/cpuX/online
+#To display the current cpu state.
+#cat /sys/devices/system/cpu/cpuX/online
 
 Q: Why cant i remove CPU0 on some systems?
 A: Some architectures may have some special dependency on a certain CPU.
@@ -234,8 +234,8 @@ Q: If i have some kernel code that needs to be aware of CPU arrival and
    departure, how to i arrange for proper notification?
 A: This is what you would need in your kernel code to receive notifications.
 
-	#include <linux/cpu.h>
-	static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb,
+    #include <linux/cpu.h>
+    static int __cpuinit foobar_cpu_callback(struct notifier_block *nfb,
 					    unsigned long action, void *hcpu)
 	{
 		unsigned int cpu = (unsigned long)hcpu;
@@ -279,10 +279,10 @@ Q: I don't see my action being called for all CPUs already up and running?
 A: Yes, CPU notifiers are called only when new CPUs are on-lined or offlined.
    If you need to perform some action for each cpu already in the system, then
 
-	for_each_online_cpu(i) {
+  for_each_online_cpu(i) {
 		foobar_cpu_callback(&foobar_cpu_notifier, CPU_UP_PREPARE, i);
-		foobar_cpu_callback(&foobar_cpu_notifier, CPU_ONLINE, i);
-	}
+		foobar_cpu_callback(&foobar-cpu_notifier, CPU_ONLINE, i);
+  }
 
 Q: If i would like to develop cpu hotplug support for a new architecture,
    what do i need at a minimum?
@@ -307,38 +307,38 @@ Q: I need to ensure that a particular cpu is not removed when there is some
    work specific to this cpu is in progress.
 A: First switch the current thread context to preferred cpu
 
-	int my_func_on_cpu(int cpu)
-	{
-		cpumask_t saved_mask, new_mask = CPU_MASK_NONE;
-		int curr_cpu, err = 0;
-
-		saved_mask = current->cpus_allowed;
-		cpu_set(cpu, new_mask);
-		err = set_cpus_allowed(current, new_mask);
-
-		if (err)
-			return err;
-
-		/*
-		 * If we got scheduled out just after the return from
-		 * set_cpus_allowed() before running the work, this ensures
-		 * we stay locked.
-		 */
-		curr_cpu = get_cpu();
-
-		if (curr_cpu != cpu) {
-			err = -EAGAIN;
-			goto ret;
-		} else {
-			/*
-			 * Do work : But cant sleep, since get_cpu() disables preempt
-			 */
-		}
-		ret:
-			put_cpu();
-			set_cpus_allowed(current, saved_mask);
-			return err;
-		}
+   int my_func_on_cpu(int cpu)
+   {
+       cpumask_t saved_mask, new_mask = CPU_MASK_NONE;
+       int curr_cpu, err = 0;
+
+       saved_mask = current->cpus_allowed;
+       cpu_set(cpu, new_mask);
+       err = set_cpus_allowed(current, new_mask);
+
+       if (err)
+           return err;
+
+       /*
+        * If we got scheduled out just after the return from
+        * set_cpus_allowed() before running the work, this ensures
+        * we stay locked.
+        */
+       curr_cpu = get_cpu();
+
+       if (curr_cpu != cpu) {
+	   err = -EAGAIN;
+           goto ret;
+       } else {
+       	   /*
+	    * Do work : But cant sleep, since get_cpu() disables preempt
+	    */
+       }
+    ret:
+    	put_cpu();
+	set_cpus_allowed(current, saved_mask);
+	return err;
+    }
 
 
 Q: How do we determine how many CPUs are available for hotplug.

trunk/Documentation/feature-removal-schedule.txt

@@ -255,7 +255,7 @@ Who:	Stephen Hemminger <shemminger@osdl.org>
 
 
 What:	PHYSDEVPATH, PHYSDEVBUS, PHYSDEVDRIVER in the uevent environment
-When:	October 2008
+When:	Oktober 2008
 Why:	The stacking of class devices makes these values misleading and
 	inconsistent.
 	Class devices should not carry any of these properties, and bus

trunk/Documentation/filesystems/00-INDEX

@@ -34,8 +34,6 @@ ext2.txt
 	- info, mount options and specifications for the Ext2 filesystem.
 ext3.txt
 	- info, mount options and specifications for the Ext3 filesystem.
-ext4.txt
-	- info, mount options and specifications for the Ext4 filesystem.
 files.txt
 	- info on file management in the Linux kernel.
 fuse.txt