---

yaml --- r: 313121 b: refs/heads/master c: 1a33a4e h: refs/heads/master i: 313119: da2123d v: v3
git-mirror · Jul 17, 2012 · ecfb0b6 · ecfb0b6
1 parent ad930ae
commit ecfb0b6
Show file tree

Hide file tree

Showing 214 changed files with 1,754 additions and 2,315 deletions.
diff --git a/[refs] b/[refs]
@@ -1,2 +1,2 @@
 ---
-refs/heads/master: 72f081c46313f82754d4b19eeb33d2a7e2bc9b80
+refs/heads/master: 1a33a4ebecce89163de27cba57ba84fd7aa16137
diff --git a/trunk/Documentation/devicetree/bindings/arm/atmel-aic.txt b/trunk/Documentation/devicetree/bindings/arm/atmel-aic.txt
@@ -4,7 +4,7 @@ Required properties:
 - compatible: Should be "atmel,<chip>-aic"
 - interrupt-controller: Identifies the node as an interrupt controller.
 - interrupt-parent: For single AIC system, it is an empty property.
-- #interrupt-cells: The number of cells to define the interrupts. It sould be 2.
+- #interrupt-cells: The number of cells to define the interrupts. It sould be 3.
   The first cell is the IRQ number (aka "Peripheral IDentifier" on datasheet).
   The second cell is used to specify flags:
     bits[3:0] trigger type and level flags:
@@ -14,7 +14,10 @@ Required properties:
       8 = active low level-sensitive.
       Valid combinations are 1, 2, 3, 4, 8.
       Default flag for internal sources should be set to 4 (active high).
+  The third cell is used to specify the irq priority from 0 (lowest) to 7
+  (highest).
 - reg: Should contain AIC registers location and length
+- atmel,external-irqs: u32 array of external irqs.
 
 Examples:
 	/*
@@ -24,7 +27,7 @@ Examples:
 		compatible = "atmel,at91rm9200-aic";
 		interrupt-controller;
 		interrupt-parent;
-		#interrupt-cells = <2>;
+		#interrupt-cells = <3>;
 		reg = <0xfffff000 0x200>;
 	};
 
@@ -34,5 +37,5 @@ Examples:
 	dma: dma-controller@ffffec00 {
 		compatible = "atmel,at91sam9g45-dma";
 		reg = <0xffffec00 0x200>;
-		interrupts = <21 4>;
+		interrupts = <21 4 5>;
 	};
diff --git a/...ion/devicetree/bindings/arm/tegra/emc.txt → ...bindings/arm/tegra/nvidia,tegra20-emc.txt b/...ion/devicetree/bindings/arm/tegra/emc.txt → ...bindings/arm/tegra/nvidia,tegra20-emc.txt
@@ -15,7 +15,7 @@ Child device nodes describe the memory settings for different configurations and
 
 Example:
 
-	emc@7000f400 {
+	memory-controller@7000f400 {
 		#address-cells = < 1 >;
 		#size-cells = < 0 >;
 		compatible = "nvidia,tegra20-emc";

diff --git a/trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt b/trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra20-mc.txt
@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller@0x7000f000 {
 		compatible = "nvidia,tegra20-mc";
 		reg = <0x7000f000 0x024
 		       0x7000f03c 0x3c4>;

diff --git a/trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt b/trunk/Documentation/devicetree/bindings/arm/tegra/nvidia,tegra30-mc.txt
@@ -8,7 +8,7 @@ Required properties:
 - interrupts : Should contain MC General interrupt.
 
 Example:
-	mc {
+	memory-controller {
 		compatible = "nvidia,tegra30-mc";
 		reg = <0x7000f000 0x010
 		       0x7000f03c 0x1b4

diff --git a/.../devicetree/bindings/gpio/gpio_nvidia.txt → ...ree/bindings/gpio/nvidia,tegra20-gpio.txt b/.../devicetree/bindings/gpio/gpio_nvidia.txt → ...ree/bindings/gpio/nvidia,tegra20-gpio.txt
diff --git a/...n/devicetree/bindings/input/tegra-kbc.txt → ...ree/bindings/input/nvidia,tegra20-kbc.txt b/...n/devicetree/bindings/input/tegra-kbc.txt → ...ree/bindings/input/nvidia,tegra20-kbc.txt
diff --git a/.../devicetree/bindings/mmc/nvidia-sdhci.txt → ...ree/bindings/mmc/nvidia,tegra20-sdhci.txt b/.../devicetree/bindings/mmc/nvidia-sdhci.txt → ...ree/bindings/mmc/nvidia,tegra20-sdhci.txt
diff --git a/.../devicetree/bindings/nvec/nvec_nvidia.txt → .../devicetree/bindings/nvec/nvidia,nvec.txt b/.../devicetree/bindings/nvec/nvec_nvidia.txt → .../devicetree/bindings/nvec/nvidia,nvec.txt
diff --git a/...ee/bindings/sound/tegra-audio-alc5632.txt → ...ings/sound/nvidia,tegra-audio-alc5632.txt b/...ee/bindings/sound/tegra-audio-alc5632.txt → ...ings/sound/nvidia,tegra-audio-alc5632.txt
diff --git a/.../bindings/sound/tegra-audio-trimslice.txt → ...gs/sound/nvidia,tegra-audio-trimslice.txt b/.../bindings/sound/tegra-audio-trimslice.txt → ...gs/sound/nvidia,tegra-audio-trimslice.txt
diff --git a/...ree/bindings/sound/tegra-audio-wm8753.txt → ...dings/sound/nvidia,tegra-audio-wm8753.txt b/...ree/bindings/sound/tegra-audio-wm8753.txt → ...dings/sound/nvidia,tegra-audio-wm8753.txt
diff --git a/...ree/bindings/sound/tegra-audio-wm8903.txt → ...dings/sound/nvidia,tegra-audio-wm8903.txt b/...ree/bindings/sound/tegra-audio-wm8903.txt → ...dings/sound/nvidia,tegra-audio-wm8903.txt
diff --git a/...devicetree/bindings/sound/tegra20-das.txt → ...ree/bindings/sound/nvidia,tegra20-das.txt b/...devicetree/bindings/sound/tegra20-das.txt → ...ree/bindings/sound/nvidia,tegra20-das.txt
diff --git a/...devicetree/bindings/sound/tegra20-i2s.txt → ...ree/bindings/sound/nvidia,tegra20-i2s.txt b/...devicetree/bindings/sound/tegra20-i2s.txt → ...ree/bindings/sound/nvidia,tegra20-i2s.txt
diff --git a/...on/devicetree/bindings/spi/spi_nvidia.txt → ...etree/bindings/spi/nvidia,tegra20-spi.txt b/...on/devicetree/bindings/spi/spi_nvidia.txt → ...etree/bindings/spi/nvidia,tegra20-spi.txt
diff --git a/...ion/devicetree/bindings/usb/tegra-usb.txt → ...tree/bindings/usb/nvidia,tegra20-ehci.txt b/...ion/devicetree/bindings/usb/tegra-usb.txt → ...tree/bindings/usb/nvidia,tegra20-ehci.txt
diff --git a/trunk/arch/arm/boot/dts/at91sam9260.dtsi b/trunk/arch/arm/boot/dts/at91sam9260.dtsi
@@ -52,10 +52,11 @@
 			ranges;
 
 			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
+				#interrupt-cells = <3>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <29 30 31>;
 			};
 
 			ramc0: ramc@ffffea00 {
@@ -81,25 +82,25 @@
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4>;
+				interrupts = <1 4 7>;
 			};
 
 			tcb0: timer@fffa0000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffa0000 0x100>;
-				interrupts = <17 4 18 4 19 4>;
+				interrupts = <17 4 0 18 4 0 19 4 0>;
 			};
 
 			tcb1: timer@fffdc000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfffdc000 0x100>;
-				interrupts = <26 4 27 4 28 4>;
+				interrupts = <26 4 0 27 4 0 28 4 0>;
 			};
 
 			pioA: gpio@fffff400 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff400 0x100>;
-				interrupts = <2 4>;
+				interrupts = <2 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -108,7 +109,7 @@
 			pioB: gpio@fffff600 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff600 0x100>;
-				interrupts = <3 4>;
+				interrupts = <3 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -117,7 +118,7 @@
 			pioC: gpio@fffff800 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
+				interrupts = <4 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -126,14 +127,14 @@
 			dbgu: serial@fffff200 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffff200 0x200>;
-				interrupts = <1 4>;
+				interrupts = <1 4 7>;
 				status = "disabled";
 			};
 
 			usart0: serial@fffb0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb0000 0x200>;
-				interrupts = <6 4>;
+				interrupts = <6 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -142,7 +143,7 @@
 			usart1: serial@fffb4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb4000 0x200>;
-				interrupts = <7 4>;
+				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -151,7 +152,7 @@
 			usart2: serial@fffb8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffb8000 0x200>;
-				interrupts = <8 4>;
+				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -160,7 +161,7 @@
 			usart3: serial@fffd0000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd0000 0x200>;
-				interrupts = <23 4>;
+				interrupts = <23 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -169,7 +170,7 @@
 			usart4: serial@fffd4000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd4000 0x200>;
-				interrupts = <24 4>;
+				interrupts = <24 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -178,7 +179,7 @@
 			usart5: serial@fffd8000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfffd8000 0x200>;
-				interrupts = <25 4>;
+				interrupts = <25 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -187,21 +188,21 @@
 			macb0: ethernet@fffc4000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffc4000 0x100>;
-				interrupts = <21 4>;
+				interrupts = <21 4 3>;
 				status = "disabled";
 			};
 
 			usb1: gadget@fffa4000 {
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfffa4000 0x4000>;
-				interrupts = <10 4>;
+				interrupts = <10 4 2>;
 				status = "disabled";
 			};
 
 			adc0: adc@fffe0000 {
 				compatible = "atmel,at91sam9260-adc";
 				reg = <0xfffe0000 0x100>;
-				interrupts = <5 4>;
+				interrupts = <5 4 0>;
 				atmel,adc-use-external-triggers;
 				atmel,adc-channels-used = <0xf>;
 				atmel,adc-vref = <3300>;
@@ -253,7 +254,7 @@
 		usb0: ohci@00500000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00500000 0x100000>;
-			interrupts = <20 4>;
+			interrupts = <20 4 2>;
 			status = "disabled";
 		};
 	};

diff --git a/trunk/arch/arm/boot/dts/at91sam9263.dtsi b/trunk/arch/arm/boot/dts/at91sam9263.dtsi
@@ -48,10 +48,11 @@
 			ranges;
 
 			aic: interrupt-controller@fffff000 {
-				#interrupt-cells = <2>;
+				#interrupt-cells = <3>;
 				compatible = "atmel,at91rm9200-aic";
 				interrupt-controller;
 				reg = <0xfffff000 0x200>;
+				atmel,external-irqs = <30 31>;
 			};
 
 			pmc: pmc@fffffc00 {
@@ -68,13 +69,13 @@
 			pit: timer@fffffd30 {
 				compatible = "atmel,at91sam9260-pit";
 				reg = <0xfffffd30 0xf>;
-				interrupts = <1 4>;
+				interrupts = <1 4 7>;
 			};
 
 			tcb0: timer@fff7c000 {
 				compatible = "atmel,at91rm9200-tcb";
 				reg = <0xfff7c000 0x100>;
-				interrupts = <19 4>;
+				interrupts = <19 4 0>;
 			};
 
 			rstc@fffffd00 {
@@ -90,7 +91,7 @@
 			pioA: gpio@fffff200 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff200 0x100>;
-				interrupts = <2 4>;
+				interrupts = <2 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -99,7 +100,7 @@
 			pioB: gpio@fffff400 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff400 0x100>;
-				interrupts = <3 4>;
+				interrupts = <3 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -108,7 +109,7 @@
 			pioC: gpio@fffff600 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff600 0x100>;
-				interrupts = <4 4>;
+				interrupts = <4 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -117,7 +118,7 @@
 			pioD: gpio@fffff800 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffff800 0x100>;
-				interrupts = <4 4>;
+				interrupts = <4 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -126,7 +127,7 @@
 			pioE: gpio@fffffa00 {
 				compatible = "atmel,at91rm9200-gpio";
 				reg = <0xfffffa00 0x100>;
-				interrupts = <4 4>;
+				interrupts = <4 4 1>;
 				#gpio-cells = <2>;
 				gpio-controller;
 				interrupt-controller;
@@ -135,14 +136,14 @@
 			dbgu: serial@ffffee00 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xffffee00 0x200>;
-				interrupts = <1 4>;
+				interrupts = <1 4 7>;
 				status = "disabled";
 			};
 
 			usart0: serial@fff8c000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff8c000 0x200>;
-				interrupts = <7 4>;
+				interrupts = <7 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -151,7 +152,7 @@
 			usart1: serial@fff90000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff90000 0x200>;
-				interrupts = <8 4>;
+				interrupts = <8 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -160,7 +161,7 @@
 			usart2: serial@fff94000 {
 				compatible = "atmel,at91sam9260-usart";
 				reg = <0xfff94000 0x200>;
-				interrupts = <9 4>;
+				interrupts = <9 4 5>;
 				atmel,use-dma-rx;
 				atmel,use-dma-tx;
 				status = "disabled";
@@ -169,14 +170,14 @@
 			macb0: ethernet@fffbc000 {
 				compatible = "cdns,at32ap7000-macb", "cdns,macb";
 				reg = <0xfffbc000 0x100>;
-				interrupts = <21 4>;
+				interrupts = <21 4 3>;
 				status = "disabled";
 			};
 
 			usb1: gadget@fff78000 {
 				compatible = "atmel,at91rm9200-udc";
 				reg = <0xfff78000 0x4000>;
-				interrupts = <24 4>;
+				interrupts = <24 4 2>;
 				status = "disabled";
 			};
 		};
@@ -200,7 +201,7 @@
 		usb0: ohci@00a00000 {
 			compatible = "atmel,at91rm9200-ohci", "usb-ohci";
 			reg = <0x00a00000 0x100000>;
-			interrupts = <29 4>;
+			interrupts = <29 4 2>;
 			status = "disabled";
 		};
 	};