isci: renaming sas_capabilities to scic_phy_cap

This seems to be a data structure that represents the phy capabilities
register from the hardware and has nothing to do with SAS data structs.
Moving and fixup

Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>

drivers/scsi/isci/core/intel_sas.h

@@ -111,42 +111,6 @@ struct sci_sas_identify_address_frame_protocols {
 
 };
 
-/**
- * struct sas_capabilities - This structure depicts the various SAS
- *    capabilities supported by the directly attached target device.  For
- *    specific information on each of these individual fields please reference
- *    the SAS specification Phy layer section on speed negotiation windows.
- *
- *
- */
-struct sas_capabilities {
-	union {
-		struct {
-			/**
-			 * The SAS specification indicates the start bit shall always be set to
-			 * 1.  This implementation will have the start bit set to 0 if the
-			 * PHY CAPABILITIES were either not received or speed negotiation failed.
-			 */
-			u32 start:1;
-			u32 tx_ssc_type:1;
-			u32 reserved1:2;
-			u32 requested_logical_link_rate:4;
-
-			u32 gen1_without_ssc_supported:1;
-			u32 gen1_with_ssc_supported:1;
-			u32 gen2_without_ssc_supported:1;
-			u32 gen2_with_ssc_supported:1;
-			u32 gen3_without_ssc_supported:1;
-			u32 gen3_with_ssc_supported:1;
-			u32 reserved2:17;
-			u32 parity:1;
-		} bits;
-
-		u32 all;
-	} u;
-
-};
-
 /**
  * enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS
  *    specification defined task attribute values for a command information

drivers/scsi/isci/core/scic_phy.h

@@ -75,6 +75,34 @@ struct scic_sds_port;
 
 enum sas_linkrate sci_phy_linkrate(struct scic_sds_phy *sci_phy);
 
+struct scic_phy_cap {
+	union {
+		struct {
+			/*
+			 * The SAS specification indicates the start bit shall
+			 * always be set to
+			 * 1.  This implementation will have the start bit set
+			 * to 0 if the PHY CAPABILITIES were either not
+			 * received or speed negotiation failed.
+			 */
+			u8 start:1;
+			u8 tx_ssc_type:1;
+			u8 res1:2;
+			u8 req_logical_linkrate:4;
+
+			u32 gen1_no_ssc:1;
+			u32 gen1_ssc:1;
+			u32 gen2_no_ssc:1;
+			u32 gen2_ssc:1;
+			u32 gen3_no_ssc:1;
+			u32 gen3_ssc:1;
+			u32 res2:17;
+			u32 parity:1;
+		};
+		u32 all;
+	};
+}  __packed;
+
 /**
  * struct scic_phy_properties - This structure defines the properties common to
  *    all phys that can be retrieved.
@@ -125,7 +153,7 @@ struct scic_sas_phy_properties {
 	 * This field delineates the Phy capabilities structure received
 	 * from the remote end point.
 	 */
-	struct sas_capabilities received_capabilities;
+	struct scic_phy_cap rcvd_cap;
 
 };
 

drivers/scsi/isci/core/scic_sds_phy.c

@@ -122,12 +122,15 @@ static enum sci_status
 scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
 				       struct scu_link_layer_registers __iomem *link_layer_registers)
 {
-	struct scic_sds_controller *scic = sci_phy->owning_port->owning_controller;
+	struct scic_sds_controller *scic =
+		sci_phy->owning_port->owning_controller;
 	int phy_idx = sci_phy->phy_index;
-	struct sci_phy_user_params *phy_user = &scic->user_parameters.sds1.phys[phy_idx];
-	struct sci_phy_oem_params *phy_oem = &scic->oem_parameters.sds1.phys[phy_idx];
+	struct sci_phy_user_params *phy_user =
+		&scic->user_parameters.sds1.phys[phy_idx];
+	struct sci_phy_oem_params *phy_oem =
+		&scic->oem_parameters.sds1.phys[phy_idx];
 	u32 phy_configuration;
-	struct sas_capabilities phy_capabilities;
+	struct scic_phy_cap phy_cap;
 	u32 parity_check = 0;
 	u32 parity_count = 0;
 	u32 llctl, link_rate;
@@ -146,7 +149,8 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
 	       &sci_phy->link_layer_registers->transmit_identification);
 
 	/* Write the device SAS Address */
-	writel(0xFEDCBA98, &sci_phy->link_layer_registers->sas_device_name_high);
+	writel(0xFEDCBA98,
+	       &sci_phy->link_layer_registers->sas_device_name_high);
 	writel(phy_idx, &sci_phy->link_layer_registers->sas_device_name_low);
 
 	/* Write the source SAS Address */
@@ -170,21 +174,21 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
 		&sci_phy->link_layer_registers->phy_configuration);
 
 	/* Configure the SNW capabilities */
-	phy_capabilities.u.all = 0;
-	phy_capabilities.u.bits.start                      = 1;
-	phy_capabilities.u.bits.gen3_without_ssc_supported = 1;
-	phy_capabilities.u.bits.gen2_without_ssc_supported = 1;
-	phy_capabilities.u.bits.gen1_without_ssc_supported = 1;
+	phy_cap.all = 0;
+	phy_cap.start = 1;
+	phy_cap.gen3_no_ssc = 1;
+	phy_cap.gen2_no_ssc = 1;
+	phy_cap.gen1_no_ssc = 1;
 	if (scic->oem_parameters.sds1.controller.do_enable_ssc == true) {
-		phy_capabilities.u.bits.gen3_with_ssc_supported = 1;
-		phy_capabilities.u.bits.gen2_with_ssc_supported = 1;
-		phy_capabilities.u.bits.gen1_with_ssc_supported = 1;
+		phy_cap.gen3_ssc = 1;
+		phy_cap.gen2_ssc = 1;
+		phy_cap.gen1_ssc = 1;
 	}
 
 	/*
 	 * The SAS specification indicates that the phy_capabilities that
 	 * are transmitted shall have an even parity.  Calculate the parity. */
-	parity_check = phy_capabilities.u.all;
+	parity_check = phy_cap.all;
 	while (parity_check != 0) {
 		if (parity_check & 0x1)
 			parity_count++;
@@ -195,10 +199,9 @@ scic_sds_phy_link_layer_initialization(struct scic_sds_phy *sci_phy,
 	 * If parity indicates there are an odd number of bits set, then
 	 * set the parity bit to 1 in the phy capabilities. */
 	if ((parity_count % 2) != 0)
-		phy_capabilities.u.bits.parity = 1;
+		phy_cap.parity = 1;
 
-	writel(phy_capabilities.u.all,
-		&sci_phy->link_layer_registers->phy_capabilities);
+	writel(phy_cap.all, &sci_phy->link_layer_registers->phy_capabilities);
 
 	/* Set the enable spinup period but disable the ability to send
 	 * notify enable spinup
@@ -561,7 +564,7 @@ enum sci_status scic_sas_phy_get_properties(
 		       &sci_phy->phy_type.sas_id_frame,
 		       sizeof(struct sas_identify_frame));
 
-		properties->received_capabilities.u.all =
+		properties->rcvd_cap.all =
 			readl(&sci_phy->link_layer_registers->receive_phycap);
 
 		return SCI_SUCCESS;