---

yaml
---
r: 375019
b: refs/heads/master
c: 474dbaa
h: refs/heads/master
i:
  375017: a433f4b
  375015: a4cafc5
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: b1dd11d60e5357c13d3f3decfb69bd07dde159bd
+refs/heads/master: 474dbaa78c9fedbe4fe7e49abb27f0ce766ec9fc

trunk/Documentation/ABI/testing/sysfs-class-mtd

@@ -14,17 +14,15 @@ Description:
 		The /sys/class/mtd/mtd{0,1,2,3,...} directories correspond
 		to each /dev/mtdX character device.  These may represent
 		physical/simulated flash devices, partitions on a flash
-		device, or concatenated flash devices.  They exist regardless
-		of whether CONFIG_MTD_CHAR is actually enabled.
+		device, or concatenated flash devices.
 
 What:		/sys/class/mtd/mtdXro/
 Date:		April 2009
 KernelVersion:	2.6.29
 Contact:	linux-mtd@lists.infradead.org
 Description:
 		These directories provide the corresponding read-only device
-		nodes for /sys/class/mtd/mtdX/ .  They are only created
-		(for the benefit of udev) if CONFIG_MTD_CHAR is enabled.
+		nodes for /sys/class/mtd/mtdX/ .
 
 What:		/sys/class/mtd/mtdX/dev
 Date:		April 2009

trunk/Documentation/acpi/enumeration.txt

@@ -66,6 +66,83 @@ the ACPI device explicitly to acpi_platform_device_ids list defined in
 drivers/acpi/acpi_platform.c. This limitation is only for the platform
 devices, SPI and I2C devices are created automatically as described below.
 
+DMA support
+~~~~~~~~~~~
+DMA controllers enumerated via ACPI should be registered in the system to
+provide generic access to their resources. For example, a driver that would
+like to be accessible to slave devices via generic API call
+dma_request_slave_channel() must register itself at the end of the probe
+function like this:
+
+	err = devm_acpi_dma_controller_register(dev, xlate_func, dw);
+	/* Handle the error if it's not a case of !CONFIG_ACPI */
+
+and implement custom xlate function if needed (usually acpi_dma_simple_xlate()
+is enough) which converts the FixedDMA resource provided by struct
+acpi_dma_spec into the corresponding DMA channel. A piece of code for that case
+could look like:
+
+	#ifdef CONFIG_ACPI
+	struct filter_args {
+		/* Provide necessary information for the filter_func */
+		...
+	};
+
+	static bool filter_func(struct dma_chan *chan, void *param)
+	{
+		/* Choose the proper channel */
+		...
+	}
+
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		dma_cap_mask_t cap;
+		struct filter_args args;
+
+		/* Prepare arguments for filter_func */
+		...
+		return dma_request_channel(cap, filter_func, &args);
+	}
+	#else
+	static struct dma_chan *xlate_func(struct acpi_dma_spec *dma_spec,
+			struct acpi_dma *adma)
+	{
+		return NULL;
+	}
+	#endif
+
+dma_request_slave_channel() will call xlate_func() for each registered DMA
+controller. In the xlate function the proper channel must be chosen based on
+information in struct acpi_dma_spec and the properties of the controller
+provided by struct acpi_dma.
+
+Clients must call dma_request_slave_channel() with the string parameter that
+corresponds to a specific FixedDMA resource. By default "tx" means the first
+entry of the FixedDMA resource array, "rx" means the second entry. The table
+below shows a layout:
+
+	Device (I2C0)
+	{
+		...
+		Method (_CRS, 0, NotSerialized)
+		{
+			Name (DBUF, ResourceTemplate ()
+			{
+				FixedDMA (0x0018, 0x0004, Width32bit, _Y48)
+				FixedDMA (0x0019, 0x0005, Width32bit, )
+			})
+		...
+		}
+	}
+
+So, the FixedDMA with request line 0x0018 is "tx" and next one is "rx" in
+this example.
+
+In robust cases the client unfortunately needs to call
+acpi_dma_request_slave_chan_by_index() directly and therefore choose the
+specific FixedDMA resource by its index.
+
 SPI serial bus support
 ~~~~~~~~~~~~~~~~~~~~~~
 Slave devices behind SPI bus have SpiSerialBus resource attached to them.

trunk/Documentation/devicetree/bindings/dma/atmel-dma.txt

@@ -1,14 +1,39 @@
 * Atmel Direct Memory Access Controller (DMA)
 
 Required properties:
-- compatible: Should be "atmel,<chip>-dma"
-- reg: Should contain DMA registers location and length
-- interrupts: Should contain DMA interrupt
+- compatible: Should be "atmel,<chip>-dma".
+- reg: Should contain DMA registers location and length.
+- interrupts: Should contain DMA interrupt.
+- #dma-cells: Must be <2>, used to represent the number of integer cells in
+the dmas property of client devices.
 
-Examples:
+Example:
 
-dma@ffffec00 {
+dma0: dma@ffffec00 {
 	compatible = "atmel,at91sam9g45-dma";
 	reg = <0xffffec00 0x200>;
 	interrupts = <21>;
+	#dma-cells = <2>;
+};
+
+DMA clients connected to the Atmel DMA controller must use the format
+described in the dma.txt file, using a three-cell specifier for each channel:
+a phandle plus two interger cells.
+The three cells in order are:
+
+1. A phandle pointing to the DMA controller.
+2. The memory interface (16 most significant bits), the peripheral interface
+(16 less significant bits).
+3. The peripheral identifier for the hardware handshaking interface. The
+identifier can be different for tx and rx.
+
+Example:
+
+i2c0@i2c@f8010000 {
+	compatible = "atmel,at91sam9x5-i2c";
+	reg = <0xf8010000 0x100>;
+	interrupts = <9 4 6>;
+	dmas = <&dma0 1 7>,
+	       <&dma0 1 8>;
+	dma-names = "tx", "rx";
 };

trunk/Documentation/devicetree/bindings/mtd/partition.txt

@@ -5,8 +5,12 @@ on platforms which have strong conventions about which portions of a flash are
 used for what purposes, but which don't use an on-flash partition table such
 as RedBoot.
 
-#address-cells & #size-cells must both be present in the mtd device and be
-equal to 1.
+#address-cells & #size-cells must both be present in the mtd device. There are
+two valid values for both:
+<1>: for partitions that require a single 32-bit cell to represent their
+     size/address (aka the value is below 4 GiB)
+<2>: for partitions that require two 32-bit cells to represent their
+     size/address (aka the value is 4 GiB or greater).
 
 Required properties:
 - reg : The partition's offset and size within the mtd bank.
@@ -36,3 +40,31 @@ flash@0 {
 		reg = <0x0100000 0x200000>;
 	};
 };
+
+flash@1 {
+	#address-cells = <1>;
+	#size-cells = <2>;
+
+	/* a 4 GiB partition */
+	partition@0 {
+		label = "filesystem";
+		reg = <0x00000000 0x1 0x00000000>;
+	};
+};
+
+flash@2 {
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	/* an 8 GiB partition */
+	partition@0 {
+		label = "filesystem #1";
+		reg = <0x0 0x00000000 0x2 0x00000000>;
+	};
+
+	/* a 4 GiB partition */
+	partition@200000000 {
+		label = "filesystem #2";
+		reg = <0x2 0x00000000 0x1 0x00000000>;
+	};
+};

trunk/Documentation/devicetree/bindings/thermal/armada-thermal.txt

@@ -0,0 +1,22 @@
+* Marvell Armada 370/XP thermal management
+
+Required properties:
+
+- compatible:	Should be set to one of the following:
+		marvell,armada370-thermal
+		marvell,armadaxp-thermal
+
+- reg:		Device's register space.
+		Two entries are expected, see the examples below.
+		The first one is required for the sensor register;
+		the second one is required for the control register
+		to be used for sensor initialization (a.k.a. calibration).
+
+Example:
+
+	thermal@d0018300 {
+		compatible = "marvell,armada370-thermal";
+                reg = <0xd0018300 0x4
+		       0xd0018304 0x4>;
+		status = "okay";
+	};

trunk/Documentation/dmatest.txt

@@ -0,0 +1,81 @@
+				DMA Test Guide
+				==============
+
+		Andy Shevchenko <andriy.shevchenko@linux.intel.com>
+
+This small document introduces how to test DMA drivers using dmatest module.
+
+	Part 1 - How to build the test module
+
+The menuconfig contains an option that could be found by following path:
+	Device Drivers -> DMA Engine support -> DMA Test client
+
+In the configuration file the option called CONFIG_DMATEST. The dmatest could
+be built as module or inside kernel. Let's consider those cases.
+
+	Part 2 - When dmatest is built as a module...
+
+After mounting debugfs and loading the module, the /sys/kernel/debug/dmatest
+folder with nodes will be created. They are the same as module parameters with
+addition of the 'run' node that controls run and stop phases of the test.
+
+Note that in this case test will not run on load automatically.
+
+Example of usage:
+	% echo dma0chan0 > /sys/kernel/debug/dmatest/channel
+	% echo 2000 > /sys/kernel/debug/dmatest/timeout
+	% echo 1 > /sys/kernel/debug/dmatest/iterations
+	% echo 1 > /sys/kernel/debug/dmatest/run
+
+Hint: available channel list could be extracted by running the following
+command:
+	% ls -1 /sys/class/dma/
+
+After a while you will start to get messages about current status or error like
+in the original code.
+
+Note that running a new test will stop any in progress test.
+
+The following command should return actual state of the test.
+	% cat /sys/kernel/debug/dmatest/run
+
+To wait for test done the user may perform a busy loop that checks the state.
+
+	% while [ $(cat /sys/kernel/debug/dmatest/run) = "Y" ]
+	> do
+	> 	echo -n "."
+	> 	sleep 1
+	> done
+	> echo
+
+	Part 3 - When built-in in the kernel...
+
+The module parameters that is supplied to the kernel command line will be used
+for the first performed test. After user gets a control, the test could be
+interrupted or re-run with same or different parameters. For the details see
+the above section "Part 2 - When dmatest is built as a module..."
+
+In both cases the module parameters are used as initial values for the test case.
+You always could check them at run-time by running
+	% grep -H . /sys/module/dmatest/parameters/*
+
+	Part 4 - Gathering the test results
+
+The module provides a storage for the test results in the memory. The gathered
+data could be used after test is done.
+
+The special file 'results' in the debugfs represents gathered data of the in
+progress test. The messages collected are printed to the kernel log as well.
+
+Example of output:
+	% cat /sys/kernel/debug/dmatest/results
+	dma0chan0-copy0: #1: No errors with src_off=0x7bf dst_off=0x8ad len=0x3fea (0)
+
+The message format is unified across the different types of errors. A number in
+the parens represents additional information, e.g. error code, error counter,
+or status.
+
+Comparison between buffers is stored to the dedicated structure.
+
+Note that the verify result is now accessible only via file 'results' in the
+debugfs.

trunk/Documentation/filesystems/f2fs.txt

@@ -146,7 +146,7 @@ USAGE
 
 Format options
 --------------
--l [label]   : Give a volume label, up to 256 unicode name.
+-l [label]   : Give a volume label, up to 512 unicode name.
 -a [0 or 1]  : Split start location of each area for heap-based allocation.
                1 is set by default, which performs this.
 -o [int]     : Set overprovision ratio in percent over volume size.
@@ -156,6 +156,8 @@ Format options
 -z [int]     : Set the number of sections per zone.
                1 is set by default.
 -e [str]     : Set basic extension list. e.g. "mp3,gif,mov"
+-t [0 or 1]  : Disable discard command or not.
+               1 is set by default, which conducts discard.
 
 ================================================================================
 DESIGN

trunk/Documentation/gpio.txt

@@ -72,11 +72,11 @@ in this document, but drivers acting as clients to the GPIO interface must
 not care how it's implemented.)
 
 That said, if the convention is supported on their platform, drivers should
-use it when possible.  Platforms must declare GENERIC_GPIO support in their
-Kconfig (boolean true), and provide an <asm/gpio.h> file.  Drivers that can't
-work without standard GPIO calls should have Kconfig entries which depend
-on GENERIC_GPIO.  The GPIO calls are available, either as "real code" or as
-optimized-away stubs, when drivers use the include file:
+use it when possible.  Platforms must select ARCH_REQUIRE_GPIOLIB or
+ARCH_WANT_OPTIONAL_GPIOLIB in their Kconfig.  Drivers that can't work without
+standard GPIO calls should have Kconfig entries which depend on GPIOLIB.  The
+GPIO calls are available, either as "real code" or as optimized-away stubs,
+when drivers use the include file:
 
 	#include <linux/gpio.h>
 

trunk/Documentation/thermal/exynos_thermal_emulation

@@ -13,11 +13,11 @@ Thermal emulation mode supports software debug for TMU's operation. User can set
 manually with software code and TMU will read current temperature from user value not from
 sensor's value.
 
-Enabling CONFIG_EXYNOS_THERMAL_EMUL option will make this support in available.
-When it's enabled, sysfs node will be created under
-/sys/bus/platform/devices/'exynos device name'/ with name of 'emulation'.
+Enabling CONFIG_THERMAL_EMULATION option will make this support available.
+When it's enabled, sysfs node will be created as
+/sys/devices/virtual/thermal/thermal_zone'zone id'/emul_temp.
 
-The sysfs node, 'emulation', will contain value 0 for the initial state. When you input any
+The sysfs node, 'emul_node', will contain value 0 for the initial state. When you input any
 temperature you want to update to sysfs node, it automatically enable emulation mode and
 current temperature will be changed into it.
 (Exynos also supports user changable delay time which would be used to delay of