Merge git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/lethal/sh-2.6: (112 commits)
  sh: Move SH-4 CPU headers down one more level.
  sh: Only build in gpio.o when CONFIG_GENERIC_GPIO is selected.
  sh: Migrate common board headers to mach-common/.
  sh: Move the CPU definition headers from asm/ to cpu/.
  serial: sh-sci: Add support SCIF of SH7723
  video: add sh_mobile_lcdc platform flags
  video: remove unused sh_mobile_lcdc platform data
  sh: remove consistent alloc cruft
  sh: add dynamic crash base address support
  sh: reduce Migo-R smc91x overruns
  sh: Fix up some merge damage.
  Fix debugfs_create_file's error checking method for arch/sh/mm/
  Fix debugfs_create_dir's error checking method for arch/sh/kernel/
  sh: ap325rxa: Add support RTC RX-8564LC in AP325RXA board
  sh: Use sh7720 GPIO on magicpanelr2 board
  sh: Add sh7720 pinmux code
  sh: Use sh7203 GPIO on rsk7203 board
  sh: Add sh7203 pinmux code
  sh: Use sh7723 GPIO on AP325RXA board
  sh: Add sh7723 pinmux code
  ...

Documentation/kernel-parameters.txt

@@ -796,6 +796,8 @@ and is between 256 and 4096 characters. It is defined in the file
 			Defaults to the default architecture's huge page size
 			if not specified.
 
+	hlt		[BUGS=ARM,SH]
+
 	i8042.debug	[HW] Toggle i8042 debug mode
 	i8042.direct	[HW] Put keyboard port into non-translated mode
 	i8042.dumbkbd	[HW] Pretend that controller can only read data from
@@ -1211,6 +1213,10 @@ and is between 256 and 4096 characters. It is defined in the file
 	mem=nopentium	[BUGS=X86-32] Disable usage of 4MB pages for kernel
 			memory.
 
+	memchunk=nn[KMG]
+			[KNL,SH] Allow user to override the default size for
+			per-device physically contiguous DMA buffers.
+
 	memmap=exactmap	[KNL,X86-32,X86_64] Enable setting of an exact
 			E820 memory map, as specified by the user.
 			Such memmap=exactmap lines can be constructed based on
@@ -1393,6 +1399,8 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	nodisconnect	[HW,SCSI,M68K] Disables SCSI disconnects.
 
+	nodsp		[SH] Disable hardware DSP at boot time.
+
 	noefi		[X86-32,X86-64] Disable EFI runtime services support.
 
 	noexec		[IA-64]
@@ -1409,13 +1417,15 @@ and is between 256 and 4096 characters. It is defined in the file
 			noexec32=off: disable non-executable mappings
 				read implies executable mappings
 
+	nofpu		[SH] Disable hardware FPU at boot time.
+
 	nofxsr		[BUGS=X86-32] Disables x86 floating point extended
 			register save and restore. The kernel will only save
 			legacy floating-point registers on task switch.
 
 	noclflush	[BUGS=X86] Don't use the CLFLUSH instruction
 
-	nohlt		[BUGS=ARM]
+	nohlt		[BUGS=ARM,SH]
 
 	no-hlt		[BUGS=X86-32] Tells the kernel that the hlt
 			instruction doesn't work correctly and not to

arch/sh/Kconfig

@@ -12,6 +12,7 @@ config SUPERH
 	select HAVE_IDE
 	select HAVE_OPROFILE
 	select HAVE_GENERIC_DMA_COHERENT
+	select HAVE_IOREMAP_PROT if MMU
 	help
 	  The SuperH is a RISC processor targeted for use in embedded systems
 	  and consumer electronics; it was also used in the Sega Dreamcast
@@ -20,6 +21,10 @@ config SUPERH
 
 config SUPERH32
 	def_bool !SUPERH64
+	select HAVE_KPROBES
+	select HAVE_KRETPROBES
+	select HAVE_ARCH_TRACEHOOK
+	select HAVE_FTRACE
 
 config SUPERH64
 	def_bool y if CPU_SH5
@@ -54,8 +59,11 @@ config GENERIC_HARDIRQS_NO__DO_IRQ
 config GENERIC_IRQ_PROBE
 	def_bool y
 
+config GENERIC_GPIO
+	def_bool n
+
 config GENERIC_CALIBRATE_DELAY
-	def_bool y
+	bool
 
 config GENERIC_IOMAP
 	bool
@@ -66,6 +74,9 @@ config GENERIC_TIME
 config GENERIC_CLOCKEVENTS
 	def_bool n
 
+config GENERIC_CLOCKEVENTS_BROADCAST
+	bool
+
 config GENERIC_LOCKBREAK
 	def_bool y
 	depends on SMP && PREEMPT
@@ -92,6 +103,10 @@ config STACKTRACE_SUPPORT
 config LOCKDEP_SUPPORT
 	def_bool y
 
+config HAVE_LATENCYTOP_SUPPORT
+	def_bool y
+	depends on !SMP
+
 config ARCH_HAS_ILOG2_U32
 	def_bool n
 
@@ -325,6 +340,7 @@ config CPU_SUBTYPE_SHX3
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
 	select SYS_SUPPORTS_SMP
+	select GENERIC_CLOCKEVENTS_BROADCAST if SMP
 
 # SH4AL-DSP Processor Support
 
@@ -492,7 +508,6 @@ config CRASH_DUMP
 config SECCOMP
 	bool "Enable seccomp to safely compute untrusted bytecode"
 	depends on PROC_FS
-	default y
 	help
 	  This kernel feature is useful for number crunching applications
 	  that may need to compute untrusted bytecode during their

arch/sh/Kconfig.debug

@@ -82,7 +82,7 @@ config DEBUG_STACK_USAGE
 
 config 4KSTACKS
 	bool "Use 4Kb for kernel stacks instead of 8Kb"
-	depends on DEBUG_KERNEL && (MMU || BROKEN)
+	depends on DEBUG_KERNEL && (MMU || BROKEN) && !PAGE_SIZE_64KB
 	help
 	  If you say Y here the kernel will use a 4Kb stacksize for the
 	  kernel stack attached to each process/thread. This facilitates

arch/sh/Makefile

@@ -76,8 +76,10 @@ KBUILD_IMAGE		:= $(defaultimage-y)
 # error messages during linking.
 #
 ifdef CONFIG_SUPERH32
+UTS_MACHINE	:= sh
 LDFLAGS_vmlinux	+= -e _stext
 else
+UTS_MACHINE	:= sh64
 LDFLAGS_vmlinux	+= --defsym phys_stext=_stext-$(CONFIG_PAGE_OFFSET) \
 		   --defsym phys_stext_shmedia=phys_stext+1 \
 		   -e phys_stext_shmedia
@@ -123,6 +125,9 @@ core-y	+= $(addprefix arch/sh/boards/, \
 	     $(filter-out ., $(patsubst %,%/,$(machdir-y))))
 endif
 
+# Common machine type headers. Not part of the arch/sh/boards/ hierarchy.
+machdir-y	+= mach-common
+
 # Companion chips
 core-$(CONFIG_HD6446X_SERIES)	+= arch/sh/cchips/hd6446x/
 

arch/sh/boards/Kconfig

@@ -128,6 +128,7 @@ config SH_RTS7751R2D
 
 config SH_RSK7203
 	bool "RSK7203"
+	select GENERIC_GPIO
 	depends on CPU_SUBTYPE_SH7203
 
 config SH_SDK7780
@@ -162,13 +163,15 @@ config SH_SH7785LCR_29BIT_PHYSMAPS
 config SH_MIGOR
 	bool "Migo-R"
 	depends on CPU_SUBTYPE_SH7722
+	select GENERIC_GPIO
 	help
 	  Select Migo-R if configuring for the SH7722 Migo-R platform
           by Renesas System Solutions Asia Pte. Ltd.
 
 config SH_AP325RXA
 	bool "AP-325RXA"
 	depends on CPU_SUBTYPE_SH7723
+	select GENERIC_GPIO
 	help
 	  Renesas "AP-325RXA" support.
 	  Compatible with ALGO SYSTEM CO.,LTD. "AP-320A"
@@ -184,6 +187,13 @@ config SH_EDOSK7705
 	bool "EDOSK7705"
 	depends on CPU_SUBTYPE_SH7705
 
+config SH_EDOSK7760
+	bool "EDOSK7760"
+	depends on CPU_SUBTYPE_SH7760
+	help
+	  Select if configuring for a Renesas EDOSK7760
+	  evaluation board.
+
 config SH_SH4202_MICRODEV
 	bool "SH4-202 MicroDev"
 	depends on CPU_SUBTYPE_SH4_202
@@ -228,6 +238,7 @@ config SH_X3PROTO
 config SH_MAGIC_PANEL_R2
 	bool "Magic Panel R2"
 	depends on CPU_SUBTYPE_SH7720
+	select GENERIC_GPIO
 	help
 	  Select Magic Panel R2 if configuring for Magic Panel R2.
 

arch/sh/boards/Makefile

@@ -6,3 +6,4 @@ obj-$(CONFIG_SH_MAGIC_PANEL_R2)	+= board-magicpanelr2.o
 obj-$(CONFIG_SH_RSK7203)	+= board-rsk7203.o
 obj-$(CONFIG_SH_SH7785LCR)	+= board-sh7785lcr.o
 obj-$(CONFIG_SH_SHMIN)		+= board-shmin.o
+obj-$(CONFIG_SH_EDOSK7760)	+= board-edosk7760.o

arch/sh/boards/board-ap325rxa.c

@@ -18,11 +18,13 @@
 #include <linux/delay.h>
 #include <linux/i2c.h>
 #include <linux/smc911x.h>
+#include <linux/gpio.h>
 #include <media/soc_camera_platform.h>
 #include <media/sh_mobile_ceu.h>
-#include <asm/sh_mobile_lcdc.h>
+#include <video/sh_mobile_lcdc.h>
 #include <asm/io.h>
 #include <asm/clock.h>
+#include <cpu/sh7723.h>
 
 static struct smc911x_platdata smc911x_info = {
 	.flags = SMC911X_USE_32BIT,
@@ -52,20 +54,33 @@ static struct platform_device smc9118_device = {
 	},
 };
 
+/*
+ * AP320 and AP325RXA has CPLD data in NOR Flash(0xA80000-0xABFFFF).
+ * If this area erased, this board can not boot.
+ */
 static struct mtd_partition ap325rxa_nor_flash_partitions[] = {
 	{
-		 .name = "uboot",
-		 .offset = 0,
-		 .size = (1 * 1024 * 1024),
-		 .mask_flags = MTD_WRITEABLE,	/* Read-only */
+		.name = "uboot",
+		.offset = 0,
+		.size = (1 * 1024 * 1024),
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+	}, {
+		.name = "kernel",
+		.offset = MTDPART_OFS_APPEND,
+		.size = (2 * 1024 * 1024),
+	}, {
+		.name = "free-area0",
+		.offset = MTDPART_OFS_APPEND,
+		.size = ((7 * 1024 * 1024) + (512 * 1024)),
 	}, {
-		 .name = "kernel",
-		 .offset = MTDPART_OFS_APPEND,
-		 .size = (2 * 1024 * 1024),
+		.name = "CPLD-Data",
+		.offset = MTDPART_OFS_APPEND,
+		.mask_flags = MTD_WRITEABLE,	/* Read-only */
+		.size = (1024 * 128 * 2),
 	}, {
-		 .name = "other",
-		 .offset = MTDPART_OFS_APPEND,
-		 .size = MTDPART_SIZ_FULL,
+		.name = "free-area1",
+		.offset = MTDPART_OFS_APPEND,
+		.size = MTDPART_SIZ_FULL,
 	},
 };
 
@@ -96,17 +111,7 @@ static struct platform_device ap325rxa_nor_flash_device = {
 #define FPGA_LCDREG	0xB4100180
 #define FPGA_BKLREG	0xB4100212
 #define FPGA_LCDREG_VAL	0x0018
-#define PORT_PHCR	0xA405010E
-#define PORT_PLCR	0xA4050114
-#define PORT_PMCR	0xA4050116
-#define PORT_PRCR	0xA405011C
-#define PORT_PSCR	0xA405011E
-#define PORT_PZCR	0xA405014C
-#define PORT_HIZCRA	0xA4050158
 #define PORT_MSELCRB	0xA4050182
-#define PORT_PSDR	0xA405013E
-#define PORT_PZDR	0xA405016C
-#define PORT_PSELD	0xA4050154
 
 static void ap320_wvga_power_on(void *board_data)
 {
@@ -116,8 +121,7 @@ static void ap320_wvga_power_on(void *board_data)
 	ctrl_outw(FPGA_LCDREG_VAL, FPGA_LCDREG);
 
 	/* backlight */
-	ctrl_outw((ctrl_inw(PORT_PSCR) & ~0x00C0) | 0x40, PORT_PSCR);
-	ctrl_outb(ctrl_inb(PORT_PSDR) & ~0x08, PORT_PSDR);
+	gpio_set_value(GPIO_PTS3, 0);
 	ctrl_outw(0x100, FPGA_BKLREG);
 }
 
@@ -281,12 +285,84 @@ static struct platform_device *ap325rxa_devices[] __initdata = {
 };
 
 static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = {
+	{
+		I2C_BOARD_INFO("pcf8563", 0x51),
+	},
 };
 
 static int __init ap325rxa_devices_setup(void)
 {
-	clk_always_enable("mstp200"); /* LCDC */
-	clk_always_enable("mstp203"); /* CEU */
+	/* LD3 and LD4 LEDs */
+	gpio_request(GPIO_PTX5, NULL); /* RUN */
+	gpio_direction_output(GPIO_PTX5, 1);
+	gpio_export(GPIO_PTX5, 0);
+
+	gpio_request(GPIO_PTX4, NULL); /* INDICATOR */
+	gpio_direction_output(GPIO_PTX4, 0);
+	gpio_export(GPIO_PTX4, 0);
+
+	/* SW1 input */
+	gpio_request(GPIO_PTF7, NULL); /* MODE */
+	gpio_direction_input(GPIO_PTF7);
+	gpio_export(GPIO_PTF7, 0);
+
+	/* LCDC */
+	clk_always_enable("mstp200");
+	gpio_request(GPIO_FN_LCDD15, NULL);
+	gpio_request(GPIO_FN_LCDD14, NULL);
+	gpio_request(GPIO_FN_LCDD13, NULL);
+	gpio_request(GPIO_FN_LCDD12, NULL);
+	gpio_request(GPIO_FN_LCDD11, NULL);
+	gpio_request(GPIO_FN_LCDD10, NULL);
+	gpio_request(GPIO_FN_LCDD9, NULL);
+	gpio_request(GPIO_FN_LCDD8, NULL);
+	gpio_request(GPIO_FN_LCDD7, NULL);
+	gpio_request(GPIO_FN_LCDD6, NULL);
+	gpio_request(GPIO_FN_LCDD5, NULL);
+	gpio_request(GPIO_FN_LCDD4, NULL);
+	gpio_request(GPIO_FN_LCDD3, NULL);
+	gpio_request(GPIO_FN_LCDD2, NULL);
+	gpio_request(GPIO_FN_LCDD1, NULL);
+	gpio_request(GPIO_FN_LCDD0, NULL);
+	gpio_request(GPIO_FN_LCDLCLK_PTR, NULL);
+	gpio_request(GPIO_FN_LCDDCK, NULL);
+	gpio_request(GPIO_FN_LCDVEPWC, NULL);
+	gpio_request(GPIO_FN_LCDVCPWC, NULL);
+	gpio_request(GPIO_FN_LCDVSYN, NULL);
+	gpio_request(GPIO_FN_LCDHSYN, NULL);
+	gpio_request(GPIO_FN_LCDDISP, NULL);
+	gpio_request(GPIO_FN_LCDDON, NULL);
+
+	/* LCD backlight */
+	gpio_request(GPIO_PTS3, NULL);
+	gpio_direction_output(GPIO_PTS3, 1);
+
+	/* CEU */
+	clk_always_enable("mstp203");
+	gpio_request(GPIO_FN_VIO_CLK2, NULL);
+	gpio_request(GPIO_FN_VIO_VD2, NULL);
+	gpio_request(GPIO_FN_VIO_HD2, NULL);
+	gpio_request(GPIO_FN_VIO_FLD, NULL);
+	gpio_request(GPIO_FN_VIO_CKO, NULL);
+	gpio_request(GPIO_FN_VIO_D15, NULL);
+	gpio_request(GPIO_FN_VIO_D14, NULL);
+	gpio_request(GPIO_FN_VIO_D13, NULL);
+	gpio_request(GPIO_FN_VIO_D12, NULL);
+	gpio_request(GPIO_FN_VIO_D11, NULL);
+	gpio_request(GPIO_FN_VIO_D10, NULL);
+	gpio_request(GPIO_FN_VIO_D9, NULL);
+	gpio_request(GPIO_FN_VIO_D8, NULL);
+
+	gpio_request(GPIO_PTZ7, NULL);
+	gpio_direction_output(GPIO_PTZ7, 0); /* OE_CAM */
+	gpio_request(GPIO_PTZ6, NULL);
+	gpio_direction_output(GPIO_PTZ6, 0); /* STBY_CAM */
+	gpio_request(GPIO_PTZ5, NULL);
+	gpio_direction_output(GPIO_PTZ5, 1); /* RST_CAM */
+	gpio_request(GPIO_PTZ4, NULL);
+	gpio_direction_output(GPIO_PTZ4, 0); /* SADDR */
+
+	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
 
 	platform_resource_setup_memory(&ceu_device, "ceu", 4 << 20);
 
@@ -300,18 +376,6 @@ device_initcall(ap325rxa_devices_setup);
 
 static void __init ap325rxa_setup(char **cmdline_p)
 {
-	/* LCDC configuration */
-	ctrl_outw(ctrl_inw(PORT_PHCR) & ~0xffff, PORT_PHCR);
-	ctrl_outw(ctrl_inw(PORT_PLCR) & ~0xffff, PORT_PLCR);
-	ctrl_outw(ctrl_inw(PORT_PMCR) & ~0xffff, PORT_PMCR);
-	ctrl_outw(ctrl_inw(PORT_PRCR) & ~0x03ff, PORT_PRCR);
-	ctrl_outw(ctrl_inw(PORT_HIZCRA) & ~0x01C0, PORT_HIZCRA);
-
-	/* CEU */
-	ctrl_outw(ctrl_inw(PORT_MSELCRB) & ~0x0001, PORT_MSELCRB);
-	ctrl_outw(ctrl_inw(PORT_PSELD) & ~0x0003, PORT_PSELD);
-	ctrl_outw((ctrl_inw(PORT_PZCR) & ~0xff00) | 0x5500, PORT_PZCR);
-	ctrl_outb((ctrl_inb(PORT_PZDR) & ~0xf0) | 0x20, PORT_PZDR);
 }
 
 static struct sh_machine_vector mv_ap325rxa __initmv = {