[SCSI] megaraid_{mbox,mm} : remove PCI Id overlaping between megaraid…

…_legacy and megaraid_{mbox,mm}

Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

Documentation/scsi/ChangeLog.megaraid

@@ -1,3 +1,38 @@
+Release Date	: Fri Nov 11 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
+Current Version : 2.20.4.7 (scsi module), 2.20.2.6 (cmm module)
+Older Version	: 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
+
+1.	Sorted out PCI IDs to remove megaraid support overlaps.
+	Based on the patch from Daniel, sorted out PCI IDs along with
+	charactor node name change from 'megadev' to 'megadev_legacy' to avoid
+	conflict.
+	---
+	Hopefully we'll be getting the build restriction zapped much sooner, 
+	but we should also be thinking about totally removing the hardware 
+	support overlap in the megaraid drivers.
+
+	This patch pencils in a date of Feb 06 for this, and performs some 
+	printk abuse in hope that existing legacy users might pick up on what's
+	going on.
+
+	Signed-off-by: Daniel Drake <dsd@gentoo.org>
+	---
+
+2.	Fixed a issue: megaraid always fails to reset handler.
+	---
+	I found that the megaraid driver always fails to reset the
+	adapter with the following message:
+		megaraid: resetting the host...
+		megaraid mbox: reset sequence completed successfully
+		megaraid: fast sync command timed out
+		megaraid: reservation reset failed
+	when the "Cluster mode" of the adapter BIOS is enabled.
+	So, whenever the reset occurs, the adapter goes to
+	offline and just become unavailable.
+
+	Jun'ichi Nomura [mailto:jnomura@mtc.biglobe.ne.jp]
+	---
+
 Release Date	: Mon Mar 07 12:27:22 EST 2005 - Seokmann Ju <sju@lsil.com>
 Current Version : 2.20.4.6 (scsi module), 2.20.2.6 (cmm module)
 Older Version	: 2.20.4.5 (scsi module), 2.20.2.5 (cmm module)

drivers/scsi/megaraid/Kconfig.megaraid

@@ -64,7 +64,6 @@ config MEGARAID_MAILBOX
 	To compile this driver as a module, choose M here: the
 	module will be called megaraid_mbox
 
-if MEGARAID_NEWGEN=n
 config MEGARAID_LEGACY
 	tristate "LSI Logic Legacy MegaRAID Driver"
 	depends on PCI && SCSI
@@ -75,7 +74,6 @@ config MEGARAID_LEGACY
 
 	To compile this driver as a module, choose M here: the
 	module will be called megaraid
-endif
 
 config MEGARAID_SAS
 	tristate "LSI Logic MegaRAID SAS RAID Module"

drivers/scsi/megaraid/megaraid_mbox.c

@@ -10,12 +10,13 @@
  *	   2 of the License, or (at your option) any later version.
  *
  * FILE		: megaraid_mbox.c
- * Version	: v2.20.4.6 (Mar 07 2005)
+ * Version	: v2.20.4.7 (Nov 14 2005)
  *
  * Authors:
  * 	Atul Mukker		<Atul.Mukker@lsil.com>
  * 	Sreenivas Bagalkote	<Sreenivas.Bagalkote@lsil.com>
  * 	Manoj Jose		<Manoj.Jose@lsil.com>
+ * 	Seokmann Ju		<Seokmann.Ju@lsil.com>
  *
  * List of supported controllers
  *
@@ -136,7 +137,7 @@ static int wait_till_fw_empty(adapter_t *);
 
 
 
-MODULE_AUTHOR("LSI Logic Corporation");
+MODULE_AUTHOR("sju@lsil.com");
 MODULE_DESCRIPTION("LSI Logic MegaRAID Mailbox Driver");
 MODULE_LICENSE("GPL");
 MODULE_VERSION(MEGARAID_VERSION);
@@ -278,87 +279,21 @@ static struct pci_device_id pci_id_table_g[] =  {
 	{
 		PCI_VENDOR_ID_AMI,
 		PCI_DEVICE_ID_AMI_MEGARAID3,
-		PCI_VENDOR_ID_DELL,
-		PCI_SUBSYS_ID_PERC3_QC,
-	},
-	{
-		PCI_VENDOR_ID_AMI,
-		PCI_DEVICE_ID_AMI_MEGARAID3,
-		PCI_VENDOR_ID_DELL,
-		PCI_SUBSYS_ID_PERC3_DC,
-	},
-	{
-		PCI_VENDOR_ID_AMI,
-		PCI_DEVICE_ID_AMI_MEGARAID3,
-		PCI_VENDOR_ID_DELL,
-		PCI_SUBSYS_ID_PERC3_SC,
-	},
-	{
-		PCI_VENDOR_ID_AMI,
-		PCI_DEVICE_ID_AMI_MEGARAID3,
-		PCI_VENDOR_ID_AMI,
-		PCI_SUBSYS_ID_PERC3_SC,
-	},
-	{
-		PCI_VENDOR_ID_AMI,
-		PCI_DEVICE_ID_AMI_MEGARAID3,
-		PCI_VENDOR_ID_AMI,
-		PCI_SUBSYS_ID_PERC3_DC,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_0,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_0,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_1,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_1,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SCSI_320_2,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SCSI_320_2,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_I4_133_RAID,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_I4_133_RAID,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SATA_150_4,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SATA_150_4,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_MEGARAID_SATA_150_6,
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_SUBSYS_ID_MEGARAID_SATA_150_6,
+		PCI_DEVICE_ID_AMI_MEGARAID3,
+		PCI_ANY_ID,
+		PCI_ANY_ID,
 	},
 	{
 		PCI_VENDOR_ID_LSI_LOGIC,
 		PCI_DEVICE_ID_LINDSAY,
 		PCI_ANY_ID,
 		PCI_ANY_ID,
 	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SRCS16,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SRCS16,
-	},
-	{
-		PCI_VENDOR_ID_LSI_LOGIC,
-		PCI_DEVICE_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK,
-		PCI_VENDOR_ID_INTEL,
-		PCI_SUBSYS_ID_INTEL_RAID_SRCU41L_LAKE_SHETEK,
-	},
 	{0}	/* Terminating entry */
 };
 MODULE_DEVICE_TABLE(pci, pci_id_table_g);
@@ -2985,6 +2920,7 @@ mbox_post_sync_cmd_fast(adapter_t *adapter, uint8_t raw_mbox[])
 
 	for (i = 0; i < 0xFFFFF; i++) {
 		if (mbox->numstatus != 0xFF) break;
+		rmb();
 	}
 
 	if (i == 0xFFFFF) {

drivers/scsi/megaraid/megaraid_mbox.h

@@ -21,8 +21,8 @@
 #include "megaraid_ioctl.h"
 
 
-#define MEGARAID_VERSION	"2.20.4.6"
-#define MEGARAID_EXT_VERSION	"(Release Date: Mon Mar 07 12:27:22 EST 2005)"
+#define MEGARAID_VERSION	"2.20.4.7"
+#define MEGARAID_EXT_VERSION	"(Release Date: Mon Nov 14 12:27:22 EST 2005)"
 
 
 /*