---

yaml
---
r: 376911
b: refs/heads/master
c: ab02963
h: refs/heads/master
i:
  376909: e2a68ff
  376907: cc3efb7
  376903: 9fadb2e
  376895: d3f041c
v: v3

[refs]

@@ -1,2 +1,2 @@
 ---
-refs/heads/master: c1d926a5d2280e35d87dea3128e826fe98776ed4
+refs/heads/master: ab0296319a8cb970f4e42659472bb40fbfae3e56

trunk/Documentation/dmatest.txt

@@ -34,7 +34,7 @@ command:
 After a while you will start to get messages about current status or error like
 in the original code.
 
-Note that running a new test will stop any in progress test.
+Note that running a new test will not stop any in progress test.
 
 The following command should return actual state of the test.
 	% cat /sys/kernel/debug/dmatest/run
@@ -52,8 +52,8 @@ To wait for test done the user may perform a busy loop that checks the state.
 
 The module parameters that is supplied to the kernel command line will be used
 for the first performed test. After user gets a control, the test could be
-interrupted or re-run with same or different parameters. For the details see
-the above section "Part 2 - When dmatest is built as a module..."
+re-run with the same or different parameters. For the details see the above
+section "Part 2 - When dmatest is built as a module..."
 
 In both cases the module parameters are used as initial values for the test case.
 You always could check them at run-time by running

trunk/Documentation/filesystems/xfs.txt

@@ -33,6 +33,9 @@ When mounting an XFS filesystem, the following options are accepted.
 	removing extended attributes) the on-disk superblock feature
 	bit field will be updated to reflect this format being in use.
 
+	CRC enabled filesystems always use the attr2 format, and so
+	will reject the noattr2 mount option if it is set.
+
   barrier
 	Enables the use of block layer write barriers for writes into
 	the journal and unwritten extent conversion.  This allows for

trunk/MAINTAINERS

@@ -2890,8 +2890,8 @@ F:	drivers/media/dvb-frontends/ec100*
 
 ECRYPT FILE SYSTEM
 M:	Tyler Hicks <tyhicks@canonical.com>
-M:	Dustin Kirkland <dustin.kirkland@gazzang.com>
 L:	ecryptfs@vger.kernel.org
+W:	http://ecryptfs.org
 W:	https://launchpad.net/ecryptfs
 S:	Supported
 F:	Documentation/filesystems/ecryptfs.txt
@@ -4448,6 +4448,16 @@ S:	Maintained
 F:	drivers/scsi/*iscsi*
 F:	include/scsi/*iscsi*
 
+ISCSI EXTENSIONS FOR RDMA (ISER) INITIATOR
+M:	Or Gerlitz <ogerlitz@mellanox.com>
+M:	Roi Dayan <roid@mellanox.com>
+L:	linux-rdma@vger.kernel.org
+S:	Supported
+W:	http://www.openfabrics.org
+W:	www.open-iscsi.org
+Q:	http://patchwork.kernel.org/project/linux-rdma/list/
+F:	drivers/infiniband/ulp/iser
+
 ISDN SUBSYSTEM
 M:	Karsten Keil <isdn@linux-pingi.de>
 L:	isdn4linux@listserv.isdn4linux.de (subscribers-only)

trunk/Makefile

@@ -1,7 +1,7 @@
 VERSION = 3
 PATCHLEVEL = 10
 SUBLEVEL = 0
-EXTRAVERSION = -rc4
+EXTRAVERSION = -rc5
 NAME = Unicycling Gorilla
 
 # *DOCUMENTATION*

trunk/arch/arm/boot/compressed/Makefile

@@ -124,7 +124,7 @@ KBUILD_CFLAGS = $(subst -pg, , $(ORIG_CFLAGS))
 endif
 
 ccflags-y := -fpic -mno-single-pic-base -fno-builtin -I$(obj)
-asflags-y := -Wa,-march=all -DZIMAGE
+asflags-y := -DZIMAGE
 
 # Supply kernel BSS size to the decompressor via a linker symbol.
 KBSS_SZ = $(shell $(CROSS_COMPILE)size $(obj)/../../../../vmlinux | \

trunk/arch/arm/boot/compressed/debug.S

@@ -1,6 +1,8 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
 #include CONFIG_DEBUG_LL_INCLUDE
 
 ENTRY(putc)
@@ -10,3 +12,29 @@ ENTRY(putc)
 	busyuart r3, r1
 	mov	 pc, lr
 ENDPROC(putc)
+
+#else
+
+ENTRY(putc)
+	adr	r1, 1f
+	ldmia	r1, {r2, r3}
+	add	r2, r2, r1
+	ldr	r1, [r2, r3]
+	strb	r0, [r1]
+	mov	r0, #0x03		@ SYS_WRITEC
+   ARM(	svc	#0x123456	)
+ THUMB(	svc	#0xab		)
+	mov	pc, lr
+	.align	2
+1:	.word	_GLOBAL_OFFSET_TABLE_ - .
+	.word	semi_writec_buf(GOT)
+ENDPROC(putc)
+
+	.bss
+	.global	semi_writec_buf
+	.type   semi_writec_buf, %object
+semi_writec_buf:
+	.space	4
+	.size	semi_writec_buf, 4
+
+#endif

trunk/arch/arm/boot/compressed/head-sa1100.S

@@ -11,6 +11,7 @@
 #include <asm/mach-types.h>
 
 		.section        ".start", "ax"
+		.arch	armv4
 
 __SA1100_start:
 

trunk/arch/arm/boot/compressed/head-shark.S

@@ -18,6 +18,7 @@
 	
 		.section	".start", "ax"
 
+		.arch armv4
 		b	__beginning
 	
 __ofw_data:	.long	0				@ the number of memory blocks

trunk/arch/arm/boot/compressed/head.S

@@ -11,6 +11,7 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
+	.arch	armv7-a
 /*
  * Debugging stuff
  *
@@ -805,8 +806,8 @@ call_cache_fn:	adr	r12, proc_types
 		.align	2
 		.type	proc_types,#object
 proc_types:
-		.word	0x00000000		@ old ARM ID
-		.word	0x0000f000
+		.word	0x41000000		@ old ARM ID
+		.word	0xff00f000
 		mov	pc, lr
  THUMB(		nop				)
 		mov	pc, lr

trunk/arch/arm/boot/dts/bcm2835.dtsi

@@ -44,6 +44,7 @@
 			reg = <0x7e201000 0x1000>;
 			interrupts = <2 25>;
 			clock-frequency = <3000000>;
+			arm,primecell-periphid = <0x00241011>;
 		};
 
 		gpio: gpio {

trunk/arch/arm/boot/dts/imx25.dtsi

@@ -141,8 +141,8 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x43fa4000 0x4000>;
-				clocks = <&clks 62>;
-				clock-names = "ipg";
+				clocks = <&clks 62>, <&clks 62>;
+				clock-names = "ipg", "per";
 				interrupts = <14>;
 				status = "disabled";
 			};
@@ -182,8 +182,8 @@
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x50004000 0x4000>;
 				interrupts = <0>;
-				clocks = <&clks 80>;
-				clock-names = "ipg";
+				clocks = <&clks 80>, <&clks 80>;
+				clock-names = "ipg", "per";
 				status = "disabled";
 			};
 
@@ -210,8 +210,8 @@
 				#size-cells = <0>;
 				compatible = "fsl,imx25-cspi", "fsl,imx35-cspi";
 				reg = <0x50010000 0x4000>;
-				clocks = <&clks 79>;
-				clock-names = "ipg";
+				clocks = <&clks 79>, <&clks 79>;
+				clock-names = "ipg", "per";
 				interrupts = <13>;
 				status = "disabled";
 			};

trunk/arch/arm/boot/dts/imx27.dtsi

@@ -131,7 +131,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000e000 0x1000>;
 				interrupts = <16>;
-				clocks = <&clks 53>, <&clks 0>;
+				clocks = <&clks 53>, <&clks 53>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -142,7 +142,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x1000f000 0x1000>;
 				interrupts = <15>;
-				clocks = <&clks 52>, <&clks 0>;
+				clocks = <&clks 52>, <&clks 52>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};
@@ -223,7 +223,7 @@
 				compatible = "fsl,imx27-cspi";
 				reg = <0x10017000 0x1000>;
 				interrupts = <6>;
-				clocks = <&clks 51>, <&clks 0>;
+				clocks = <&clks 51>, <&clks 51>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

trunk/arch/arm/boot/dts/imx51.dtsi

@@ -631,7 +631,7 @@
 				compatible = "fsl,imx51-cspi", "fsl,imx35-cspi";
 				reg = <0x83fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 0>;
+				clocks = <&clks 55>, <&clks 55>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

trunk/arch/arm/boot/dts/imx53.dtsi

@@ -714,7 +714,7 @@
 				compatible = "fsl,imx53-cspi", "fsl,imx35-cspi";
 				reg = <0x63fc0000 0x4000>;
 				interrupts = <38>;
-				clocks = <&clks 55>, <&clks 0>;
+				clocks = <&clks 55>, <&clks 55>;
 				clock-names = "ipg", "per";
 				status = "disabled";
 			};

trunk/arch/arm/include/asm/percpu.h

@@ -30,8 +30,15 @@ static inline void set_my_cpu_offset(unsigned long off)
 static inline unsigned long __my_cpu_offset(void)
 {
 	unsigned long off;
-	/* Read TPIDRPRW */
-	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : : "memory");
+	register unsigned long *sp asm ("sp");
+
+	/*
+	 * Read TPIDRPRW.
+	 * We want to allow caching the value, so avoid using volatile and
+	 * instead use a fake stack read to hazard against barrier().
+	 */
+	asm("mrc p15, 0, %0, c13, c0, 4" : "=r" (off) : "Q" (*sp));
+
 	return off;
 }
 #define __my_cpu_offset __my_cpu_offset()

trunk/arch/arm/include/asm/tlb.h

@@ -33,18 +33,6 @@
 #include <asm/pgalloc.h>
 #include <asm/tlbflush.h>
 
-/*
- * We need to delay page freeing for SMP as other CPUs can access pages
- * which have been removed but not yet had their TLB entries invalidated.
- * Also, as ARMv7 speculative prefetch can drag new entries into the TLB,
- * we need to apply this same delaying tactic to ensure correct operation.
- */
-#if defined(CONFIG_SMP) || defined(CONFIG_CPU_32v7)
-#define tlb_fast_mode(tlb)	0
-#else
-#define tlb_fast_mode(tlb)	1
-#endif
-
 #define MMU_GATHER_BUNDLE	8
 
 /*
@@ -112,12 +100,10 @@ static inline void __tlb_alloc_page(struct mmu_gather *tlb)
 static inline void tlb_flush_mmu(struct mmu_gather *tlb)
 {
 	tlb_flush(tlb);
-	if (!tlb_fast_mode(tlb)) {
-		free_pages_and_swap_cache(tlb->pages, tlb->nr);
-		tlb->nr = 0;
-		if (tlb->pages == tlb->local)
-			__tlb_alloc_page(tlb);
-	}
+	free_pages_and_swap_cache(tlb->pages, tlb->nr);
+	tlb->nr = 0;
+	if (tlb->pages == tlb->local)
+		__tlb_alloc_page(tlb);
 }
 
 static inline void
@@ -178,11 +164,6 @@ tlb_end_vma(struct mmu_gather *tlb, struct vm_area_struct *vma)
 
 static inline int __tlb_remove_page(struct mmu_gather *tlb, struct page *page)
 {
-	if (tlb_fast_mode(tlb)) {
-		free_page_and_swap_cache(page);
-		return 1; /* avoid calling tlb_flush_mmu */
-	}
-
 	tlb->pages[tlb->nr++] = page;
 	VM_BUG_ON(tlb->nr > tlb->max);
 	return tlb->max - tlb->nr;

trunk/arch/arm/kernel/topology.c

@@ -13,6 +13,7 @@
 
 #include <linux/cpu.h>
 #include <linux/cpumask.h>
+#include <linux/export.h>
 #include <linux/init.h>
 #include <linux/percpu.h>
 #include <linux/node.h>
@@ -200,6 +201,7 @@ static inline void update_cpu_power(unsigned int cpuid, unsigned int mpidr) {}
  * cpu topology table
  */
 struct cputopo_arm cpu_topology[NR_CPUS];
+EXPORT_SYMBOL_GPL(cpu_topology);
 
 const struct cpumask *cpu_coregroup_mask(int cpu)
 {

trunk/arch/arm/kvm/arm.c

@@ -492,6 +492,11 @@ static void vcpu_pause(struct kvm_vcpu *vcpu)
 	wait_event_interruptible(*wq, !vcpu->arch.pause);
 }
 
+static int kvm_vcpu_initialized(struct kvm_vcpu *vcpu)
+{
+	return vcpu->arch.target >= 0;
+}
+
 /**
  * kvm_arch_vcpu_ioctl_run - the main VCPU run function to execute guest code
  * @vcpu:	The VCPU pointer
@@ -508,8 +513,7 @@ int kvm_arch_vcpu_ioctl_run(struct kvm_vcpu *vcpu, struct kvm_run *run)
 	int ret;
 	sigset_t sigsaved;
 
-	/* Make sure they initialize the vcpu with KVM_ARM_VCPU_INIT */
-	if (unlikely(vcpu->arch.target < 0))
+	if (unlikely(!kvm_vcpu_initialized(vcpu)))
 		return -ENOEXEC;
 
 	ret = kvm_vcpu_first_run_init(vcpu);
@@ -710,6 +714,10 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 	case KVM_SET_ONE_REG:
 	case KVM_GET_ONE_REG: {
 		struct kvm_one_reg reg;
+
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			return -ENOEXEC;
+
 		if (copy_from_user(&reg, argp, sizeof(reg)))
 			return -EFAULT;
 		if (ioctl == KVM_SET_ONE_REG)
@@ -722,6 +730,9 @@ long kvm_arch_vcpu_ioctl(struct file *filp,
 		struct kvm_reg_list reg_list;
 		unsigned n;
 
+		if (unlikely(!kvm_vcpu_initialized(vcpu)))
+			return -ENOEXEC;
+
 		if (copy_from_user(&reg_list, user_list, sizeof(reg_list)))
 			return -EFAULT;
 		n = reg_list.n;